QCY AllyBuds E10 Wireless Earbuds

Overview

This section provides a visual overview of the QCY AllyBuds E10 wireless earbuds and their charging case.

Key Components:

• Earbuds: [earbuds]
• Charging Case: [charging case]
• Type-C Cable: [Type-C cable]
• Sound hole: [sound hole]
• LED on charging case: [LED indicator on charging case]
• Touch panel: [touch panel]
• Pogo pins: [pogo pins]
• Microphone: [microphone]
• Type-C port: [Type-C port]

How to Connect

First-Time Connection

1. Pick up both earbuds, remove their isolation films, and place them back into the charging case. Close the lid to activate them.
2. Pick up the earbuds again.
3. On your phone, search for "QCY AllyBuds E10" and tap to connect.

Note: Please download the QCY App to experience more functions before use.

Multi-Point Connection

This feature allows connection to two devices simultaneously.

1. Power on the earbuds; they will automatically become connectable. Connect them to Device A, then turn off Bluetooth on Device A.
2. On Device B, search for "QCY AllyBuds E10" and tap to connect.
3. On Device A, tap "QCY AllyBuds E10" to finish the Multi-Point Connection.

Diagram Description: Visual representation showing connection flow between Device A, Device B, and the earbuds.

Factory Reset

Use this procedure if you encounter connection issues.

1. Place the earbuds in the charging case to ensure they are charged.
2. Tap both touch panels 5 times. The earbuds will reset to factory settings (LEDs will blink white 5 times).
3. Refer to "First-Time Connection" to reconnect the earbuds to your phone.

How to Wear

1. Insert the earbuds and rotate them to adjust for a comfortable and secure fit.
2. Position the microphone towards your mouth for optimal voice pickup.
3. Improper wear may lead to a suboptimal user experience.

Functions

Control your earbuds using the touch panels.

• Power-on: Open the charging case lid and pick up the earbuds, OR pick up both earbuds and keep touching the panels for 1.5 seconds.
• Power-off: Place the earbuds back into the charging case.
• Answer/End Call: Double-touch either touch panel.
• Ignore Call: Keep touching either touch panel for 1.5 seconds.
• Play/Pause Music: Double-touch either touch panel.
• Skip Track Backward: Keep touching the left touch panel.
• Skip Track Forward: Keep touching the right touch panel.
• Voice Assistant: Triple-touch the left touch panel.
• Low Latency Mode: Triple-touch the right touch panel.

LED Indicators

Earbuds LEDs

• LEDs glow solid red when the earbuds are charging.
• LEDs turn white for 10 seconds when charging is complete.

Charging Case LED

• LED blinks white when the case is charging.
• LED turns white when charging is complete.
• If the case has sufficient power, the LED turns white for 4 seconds when earbuds are placed inside.
• If the case has low power, the LED blinks white for 4 seconds when earbuds are placed inside.

Warranty

Your QCY product is covered by a one-year limited manufacturer warranty from the date of purchase. Please retain your purchase receipt.

If defects occur due to quality issues within the warranty period, bring the warranty card and purchase receipt to an authorized dealer for complimentary replacement.

Warranty Details:

Warranty Void Circumstances:

• Improper or inadequate maintenance or modification.
• Accident, misuse, abuse, contamination, or other external causes.
• Use of unspecified adapter and accessories.
• Malfunctions or damages from natural disasters, abnormal voltage, or environmental factors.
• Failure to follow instructions.

FCC Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Wireless frequency: 2.402-2.480GHz

RF power of transmission: <4dBi

Diagram Description: FCC ID: RDR-BH24QT35AL.

Safety Precautions

1. Read and retain this user manual before use.
2. If not used for over 2 weeks, please recharge the product.
3. Use only chargers produced by legitimate manufacturers and certified by national safety authorities.
4. If your phone cannot detect the earbuds, re-enter pairing mode or perform a factory reset. Restarting Bluetooth or the phone may also help.
5. Do not disassemble, modify the battery, insert foreign objects, expose to high temperatures, or immerse in water to prevent leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
6. Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
7. Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage.
8. Do not expose the product to extreme temperatures (below 0°C or above 45°C).
9. Do not point the product indicator light near the eyes of children or animals.
10. Do not use the product during thunderstorms to avoid abnormal operation and electric shock risk.
11. Do not use oil or other volatile liquids to clean the product.
12. Avoid prolonged use at high volume to prevent hearing damage.

Environmental Compliance

Hazardous Substances Table:

This table indicates the presence of hazardous substances in components.

Key:

• 'O' indicates that the content of the hazardous substance is below the limit requirement specified in GB/T 26572.
• 'X' indicates that the content of the hazardous substance exceeds the limit requirement specified in GB/T 26572.

Environmental Use Period: The product has an environmental protection use period of 10 years under normal usage conditions. During this period, the product will not leak hazardous substances and can be recycled according to regulations.

Disposal: This marking indicates that the product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. Use return and collection systems or contact the retailer for environmentally safe recycling.

Manufacturer Information

Manufacturer: Dongguan Hele Electronics Co., Ltd.

Address: No. 325 Yuehui Rd. Daojiao Town, Dongguan City, Guangdong Province, China.

Website: www.qcy.com

Customer Service Hotline: 4008-306-708

Compliance Marks

The product complies with CE and ROHS standards.

Diagram Description: The product also features CCC certification.

Additional Information

Diagram Description: The document includes a "资料确认表" (Material Confirmation Sheet) detailing specifications like size (55x80mm), material (80g matte paper), and process (matte oil, double-sided printing, folding).

Diagram Description: A table lists component specifications with tolerances (e.g., ±5.0mm, ±1.0mm).

Diagram Description: The document is Revision A.