SEPLOS V16 BMS Bluetooth App Installation Guide
Dongguan Seplos Technology Co., Ltd
1. Introduction
This Bluetooth APP is suitable for Android devices and can be used to manage the battery pack. It allows for warning information collection, querying, display, and configuration revision by connecting the phone to the Bluetooth module in the battery.
Function:
- Display basic information of the battery pack.
- Configure communication between BMS and inverter.
- Configure warning, parameter protection, and switch control.
- Support monitoring of single or parallel packs, with the ability to switch single pack connection at any time.
- Switch between Chinese and English languages.
1.1 Application
The manual applies to the following models:
- EMU1101 V14 (24V~48V)
- EMU1101 V15 (24V~48V)
- EMU1203 V16 (24V~48V)
1.2 User
This manual is intended for technical staff for test guidance in the factory, as well as for user operation guidance in practical use.
2. Operation
2.1 APK download and install
Scan the QR code or click the following link to download the application: https://www.pgyer.com/sa7t
After downloading, click to install.
2.2 Login
- Click the app icon.
- Input username and password.
- Account: admin, Password: 111111
- Click "Login".
- Click "English" to switch to the English interface.
After login, all the packs' information will be displayed on the interface.
Single pack: Displays as BP00 because the single pack address code is zero.
Parallel pack: Only the master pack BP00 is shown to avoid incorrect connection by the user. Click 'Single' to choose the paralleled battery pack. Click 'Device Detail' to get detailed pack information.
2.3 Interface introduction
Click 'Alarm' and 'Protection' to view detailed protection and alarm information.
Click 'Set parameters' and 'switch settings' to configure warning and protection threshold values, and to switch functions on/off.
Click 'Inverter CAN' and 'Inverter 385' to switch protocols.
