Product Overview
The Hama EWM-500 ERGONOMIC R is a 7-button wireless mouse designed for ergonomic comfort and efficient use. This document provides essential setup instructions and technical details.
Setup and Usage
Follow these steps to set up and use your Hama EWM-500 ERGONOMIC R mouse:
Connecting the Receiver
Step A: Connect the USB receiver (USB-A type) to an available USB port on your computer (desktop or laptop). Ensure the receiver is plugged directly into the computer's USB port and not through an adapter or hub, as indicated by the '❌' symbol.
[Diagram A shows a USB-A receiver being plugged into a laptop's USB port. A crossed-out image shows an incorrect adapter/hub connection.]Installing the Battery
Step C: Open the battery compartment on the underside of the mouse. Insert one AA battery, observing the correct polarity (+/-) as indicated inside the compartment.
[Diagram C shows the underside of the mouse with the battery compartment open and an arrow indicating battery insertion. A checkmark symbol ✔️ indicates correct placement.]Powering On and Travel Mode
Step B: After inserting the battery, slide the ON/OFF switch to the 'ON' position. The mouse is now ready for use. The 'TRAVEL' label indicates a mode or storage consideration, though specific instructions for it are not detailed beyond the switch.
[Diagram B shows the USB receiver being inserted into a computer port (labeled 1) and an AA battery being inserted into the mouse's battery compartment (labeled with + and -). The ON/OFF switch is visible.]Adjusting DPI Settings
Step D: The mouse features adjustable DPI (Dots Per Inch) settings for cursor sensitivity. Press the designated button (typically located near the scroll wheel) to cycle through DPI levels: 1000 DPI, 1200 DPI, and 1600 DPI. The current DPI setting is indicated by the cursor speed on your screen.
[Diagram D shows the mouse with arrows indicating a button press to cycle through DPI settings: 1000 DPI, 1200 DPI, 1600 DPI. A web browser window pointing to hama.com is also shown.]AI Assistant Function
Step E: To activate the AI assistant, press and hold the designated button for approximately 1 second (indicated by a timer icon ⏱️ and '1s').
[Diagram E shows a finger pressing a button on the mouse for 1 second to activate the AI assistant.]Declaration of Conformity
Hama GmbH & Co KG declares that the radio equipment type [00173088] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://support.hama.com/00173088
Key Technical Specifications:
- Frequency band(s): 2402 – 2480 MHz
- Maximum radio-frequency power transmitted: 0,50 mW E.I.R.P
Support and Warranty Information
For service and support, please visit:
https://support.hama.com/00173088
You can also contact Hama GmbH & Co KG at:
Phone: +49 9091 502-0
General Information: www.hama.com/nep
Warranty Disclaimer: Hama GmbH & Co KG assumes no liability for damage resulting from improper installation, mounting, use of the product, or failure to observe operating and safety instructions.
