Hama WM-800 8-Button Wireless Mouse

Product Overview & Features

The Hama WM-800 is an 8-button wireless mouse designed for versatile use. It offers multiple connectivity options including 2.4 GHz wireless and Bluetooth (with two pairing modes: BT 1 and BT 2). The mouse features adjustable DPI settings for precision control, a dedicated button for activating an AI assistant, and a rechargeable battery that can be charged via USB-C.

Key Features:

• 8 Programmable Buttons
• Adjustable DPI: 800, 1200, 1600, 2400, 3200 DPI
• Connectivity: 2.4 GHz Wireless, Bluetooth (BT 1, BT 2)
• AI Assistant Button (3-second press activation)
• Rechargeable Battery
• USB-C Charging Port
• Power Switch (ON/OFF)
• Status LED for charging indication

Safety Notes

Please read the warnings and safety instructions before using the product.

• Use the product only in moderate climatic conditions.
• Do not throw the battery or the product into fire.
• Do not tamper with, damage, heat, or disassemble batteries/rechargeable batteries.
• The power delivered by the charger must be between a minimum of 1 Watt and a maximum of 2 Watts for optimal charging speed.
• The standardized USB interface allows the use of chargers with higher output power.

Warning – Changeable Rechargeable Battery

• Use only suitable chargers or USB ports for charging.
• Do not use defective chargers or USB ports, and do not attempt to repair them.
• Do not overcharge or deep-discharge the product or rechargeable battery.
• Avoid storing, charging, and using the product in extreme temperatures and at extremely low atmospheric pressures (e.g., at high altitudes).
• When stored for a long period, charge batteries regularly (at least every three months).
• Do not incinerate the rechargeable battery or the product.
• Do not short-circuit batteries and keep them away from bare metal objects.
• Only use batteries that match the specified type. Keep instructions for correct battery selection for future reference.

Specific Instructions for Battery Change

• Do not allow children to change rechargeable batteries without supervision. Keep batteries out of reach of children.
• Use only recommended tools to avoid damage.
• Ensure the rechargeable battery is as discharged as possible before replacing it.
• Ensure the device is switched off and disconnected from the power supply before removing the battery.
• Avoid damage from electrostatic discharge when changing the battery; wear antistatic gloves if necessary.
• Refer to operating instructions for correct polarity when replacing the battery; incorrect polarity risks leakage or explosion.
• Dispose of replaced batteries according to local safety and disposal regulations.
• Always follow battery replacement instructions and consult specialized personnel for any problems or uncertainties.
• Attention: Hama is not responsible for the safety of non-approved rechargeable batteries or for resulting damage.

Battery Charging

• The product contains a rechargeable battery.
• Charge the mouse fully before using it for the first time.
• If the Power LED is flashing or there is no reaction/connection after switching on, the mouse needs to be charged.
• Connect the supplied USB charging cable to the USB-C port on the mouse.
• Connect the free plug of the USB charging cable to a suitable USB charger. Consult the charger's operating instructions.
• The status LED will light up solid red while the mouse is charging.
• The status LED will turn off once the charging process is complete.
• Actual battery life varies based on usage, settings, and environmental conditions. Batteries have a limited lifespan.
• Use only the included USB charging cable for this product.

Specifications according to Regulation (EU) 2023/826

Information regarding energy consumption can be found at: https://support.hama.com/00173096

Device Description

The mouse features a power switch (OFF/ON) and connectivity options for 2.4 GHz wireless and Bluetooth (BT 1, BT 2). It includes a dedicated button for an AI assistant function, activated by pressing and holding for 3 seconds. The mouse also has buttons for adjusting DPI settings (800, 1200, 1600, 2400, 3200 DPI). Charging is done via a USB-C port, with a status LED indicating the charging process.