Zidoo Z2000 PRO 4K UHD Media Player

Follow Zidoo on Social Media

Thank you for choosing products of Zidoo. Friend us on WeChat or Weibo to communicate and share with us.

• WeChat Official Account: @ zidoo
• Weibo Account: @ 芝杜官方
• Facebook: @ zidootv
• Twitter: @ zidootv

For more assistance, please visit the user forum on the official Zidoo website for consultation.

Official website: www.zidoo.tv

Introduction to Hardware of Z2000 PRO

Device Interface

The Zidoo Z2000 PRO is equipped with a rich array of audio and video input/output ports, as well as data transmission interfaces. Please refer to the following descriptions.

1. Front Panel

The front panel features an LED display, an IR receiver, a power button, and a cover for the HDD bay.

The HDD bay is a slide-out design, supporting SATA high-speed transmission. No tools are required for installation. The hard disk can be easily inserted by pushing it in. The maximum supported hard disk capacity is 14TB.

2. Right Side Panel

The right side panel has a cover.

3. Back Panel

The back panel includes a power switch, Gigabit LAN port, HDMI port, Optical audio output, Coaxial audio output, RS232 port, and USB 3.0 ports. It also features L/R audio channels.

Caution: Risk of electric shock. Do not open the housing.

Notes:

• Please load or change the hard disk after turning off the power. If it is a brand-new hard disk, please load it after formatting it.
• Please prevent the orifice of the cooling fan from being blocked.
• Do not touch any liquid in case it runs into the inner part of the device and causes damage.
• Only appointed maintenance personnel are allowed to open the case.

Load the Hard Disk

The Z2000 PRO is equipped with a 3.5-inch HDD Bay and a high-speed SATA transmission port. The hard disk can be loaded by pushing with hand. The maximum hard disk capacity supported is 14TB.

Note: Do not load or change the hard disk while the power is on to avoid damage to the device or hard drive data. If it is a brand-new hard disk, please format it before loading it to the device. This device supports hard disk formats: EXT3, EXT4, NTFS, FAT32, EXFAT.

Device Connection

1. Connect HDMI Cable to TV

1. Cut off the power. Ensure the power of the TV and media player are off.
2. When the TV is turned off, connect the HDMI port on the Zidoo to the HDMI IN port on the TV.
3. Connect the power. This device is equipped with a suitable AC power adapter. Connect the head of the AC power adapter to the AC power input port of this device, then insert the plug of the AC power adapter into the 110V-240V socket and turn on the power switch.
4. Press the power button on the front panel of the device or the power button on the remote control to turn it on. Then, turn on the TV.
5. Select the corresponding video source on the TV.

2. Connect AV Cable to TV

The connection method is the same as connecting the HDMI cable.

Z2000 PRO Specifications

Boot Initialization Wizard

Before formally using the machine, the system will perform the initial setup. Please set according to devices and requirements to get the best visual experience.

1. System language selection, screen zoom, time zone setting

Choose the system language according to your language habit.

Press the UP and DOWN buttons on the remote control to adjust the screen display area.

Select the time zone for the system according to your location.

2. Bluetooth Match-Up

Align the remote controller with the media player and press the Page-Down KEY and Menu KEY simultaneously for at least 5 seconds until the indicator light blinks. The light will turn off after successful matching.

How to connect Bluetooth Remote:

• Put the remote near the box within 30cm, direct it to the box.
• Hold both the Page-Down key and the Menu key simultaneously.
• Release the keys after the LED flashes.

Connection Status:

• Connection: Disconnected
• Device name:
• Address:

3. Network Setting

Configure network to connect the device to the network quickly.

WIFI: Choose the network SSID, input the password, and connect to WIFI.

Ethernet: Plug in the network cable to connect the network automatically.

4. Select output mode

Please select the corresponding mode according to your needs; it will finish the relevant setting.

Wizard mode: Select the corresponding option according to your usage environment and device connection.

Expert mode: The audio and video output is customized by users. It is recommended for professionals.

5. Key definition

Define the corresponding functions for number keys, timing key, subtitle key, audio key, up and down keys, and page keys on the remote control according to your usage habits.

After completing the settings above, please follow the prompts and click "Next" to finish the initial setup. Enjoy Zidoo audio visual feast!

OTA System Update

Zidoo will update the firmware from time to time. Find the update icon in APPS and click it. Online update and local update are supported. After ticking "Automatically check online upgrade", you will receive the prompt for the latest firmware update automatically.

1. Online Update

Click "Online Update" to obtain information about the online update.

2. Local Update

Users can download the update files from the forum or official website and update the firmware through files. Copy the downloaded update file to a USB disk. Click "USB update" to select the update file.

Download the update file by online update or local update. Click "Update" to update it.

The system will automatically check the update file for completeness.

Note: Automatically access to system upgrade. Please do not power off during the process.

Once the update process is completed, the system will automatically restart.

Special Note:

To guarantee the user experience, Zidoo will update the firmware from time to time. Therefore, this manual may not be totally in line with the product.

Guarantee

User File

Guarantee Item

(1) One year guarantee from date of purchase (not including fittings).

(2) All damage by man-made (tear open the housing, tear off the sticker, abnormal usage), or losing this card, will not be guaranteed.

(1) Warranty period: This product follows the national "three guarantees" regulations. For hardware failures caused by non-human factors, the company will provide one year of warranty service (excluding accessories).

(2) If you need to return the product to the company for repair, please send it back with this warranty card.

(3) Any damage caused by human factors (including unauthorized disassembly, sticker removal, self-flashing, etc.) will not be covered by the warranty.

QUALIFIED CERTIFICATE

CHECKER/Inspector: __________

DATE/Date: __________