Installation Guide for tp-link models including: EAP772-Outdoor, EAP772 Omada Outdoor Access Point, EAP772, Omada Outdoor Access Point, Access Point, Point
EAP772-Outdoor V1 Installation Guide | Omada Network Support BookmarksCopy LinkFeedback
File Info : application/pdf, 2 Pages, 693.16KB
DocumentDocumentQuick Installation Guide Indoor/Outdoor Access Point Scan for EAP Start Guide Note: EAP772-Outdoor is used as an example throughout the guide. Images may differ from your actual product. ©2025 TP-Link 7106512030 REV1.1.0 Installation Option 1: Pole Mounting Package Contents 1× 1× Waterproof Kit 5 mm 1× 1× Mounting Kit 6 mm 1× Quick Installation Guide 1× 1× 1× 1× 1× 4× 4× 2× Option 2: Wall Mounting 2× 1 2 1× 1× 4× 4× 1 7.6 mm (19/64 in) 2 3 Connection 1. Waterproofing 2. Grounding 1 O-Ring 2 Bracket Spiral Cover 3 Seal 4 Note: To ensure waterproofing, choose the proper seal according to the type and diameter of the Ethernet cable. Note: For lightning and ESD protection, connect the EAP's grounding terminal to grounding facilities using a proper grounding wire, which should meet local installation requirements. 3. Power On PoE Switch Configuration Option 1: Standalone Mode Configure and manage each EAP on its standalone page. Option 2: Controller Mode Configure and manage EAPs (and other Omada devices) centrally on an Omada Controller. Gateway/Router Switch Scan for Standalone Start Guide Gateway/Router Switch Cloud-Based Controller Or On-Premises Controller Scan for Controller Start Guide EAP EAP EAP Omada App With the TP-Link Omada app, you can access and manage your Omada devices at a local site or remotely with a tap of your phone. Scan for Omada App EAP EAP EAP More Configurations For more configurations, refer to the user guides of the controller and EAPs in our Download Center: https://www.tp-link.com/support/download Safety Information · Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. · Do not use the device where wireless devices are not allowed. · This EAP can be powered only by equipment that complies with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/ Attention: In EU member states, EFTA countries, and Northern Ireland, the operation in the frequency range 5150MHz - 5350MHz and 6105MHz - 6425MHz is only permitted indoors. Attention: In Great Britain, the operation in the frequency range 5150MHz - 5350MHz and 6105MHz - 6425MHz is only permitted indoors. For the EAP Controller, go to the Devices page and select the desired EAP to specify the channel. For the web browser, go to Wireless > Wireless Settings to specify the channel. AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL UK NO PL PT RO SE SI SK UK(NI) More Resources Main Site https://www.tp-link.com Setup Videos https://www.tp-link.com/support/setup-video Business Community https://community.tp-link.com/business Download Center https://www.tp-link.com/support/download Technical Support https://www.tp-link.com/support/contact-technical-support Warranty For details on the warranty period, policy, and procedures, visit https://www.tp-link.com/support/replacement-warranty. Support For technical support, user guides, and other information, please visit https://www.tp-link.com/support/?type=smb, or simply scan the QR code.
Business Community
TP-Link: Your Smart Home, Simplified