Pioneer VREC-H120SC Dash Camera

Product Overview

This guide provides basic information on the Pioneer VREC-H120SC Dash Camera. For detailed information, please refer to the region-wise Pioneer website.

For detailed manuals, visit:

• Pioneer Gulf
• Pioneer Electronics AsiaCentre Pte. Ltd.

After-Sales Service

For after-sales service or product questions, please contact the authorized Pioneer dealer where the unit was purchased or an authorized Pioneer service company. You may also contact Pioneer directly:

Pioneer Gulf

Pioneer Gulf Free Zone, P.O. Box 61226, Jebel Ali, Dubai, U. A. E.
Tel: +971 4 8815756 | Fax: +971 4 8816414
E-mail: support@pioneer-mea.com

Pioneer Electronics AsiaCentre Pte. Ltd.

2 Jalan Kilang Barat, #04-02, Singapore 159346
Tel: (65) 6378 7777 / (65) 6378 7888
E-mail: enquiry@pioneer.com.sg

Precautions

General Information

Collection and Disposal of Old Equipment and Used Batteries:

Symbols on products, packaging, or documents indicate that used electrical and electronic products should not be mixed with general household waste. Please take them to applicable collection points for proper treatment, recovery, and recycling, in accordance with national legislation. Proper disposal helps save resources and prevent negative environmental and health effects. Contact your local municipality, waste disposal service, or point of sale for more information. Comply with governmental regulations or environmental public institution's rules.

[WEEE symbol for electrical and electronic equipment]

Safety Precautions

Be aware that country, state, and provincial laws may restrict the placement and use of this product in your vehicle. It is the user's responsibility to comply with all applicable laws, rules, regulations, and ordinances regarding the use, installation, and operation of this product.

Warning

• Do not install this product if its location or use obstructs the driver's view of the road or the operation of any vehicle airbag.
• Owners/drivers are responsible for knowing and complying with local driving laws, including passenger privacy rights. Do not use the device where installation or use is prohibited.
• Do not use this device for prohibited audio or video recordings. Provide required notice that recordings are being made and obtain consent from persons being recorded. Some regions require visible written notice for occupants and conversations.

Caution

• The graphical symbol [DC symbol] on the product indicates direct current.
• This product has been evaluated for moderate and tropical climate conditions according to IEC 60065 "Audio, video and similar electronic equipment - Safety requirements".

Specific Warnings

• Warning: Do not allow the product to contact liquids, as this can cause electrical shock, smoke, overheating, or damage.
• Before Use: Read and understand all safety information.
• Do not use the product if it distracts from safe driving. Always follow traffic regulations. If you have difficulty operating the product or reading the display, park safely and apply the parking brake before making adjustments.
• Certain functions may be dangerous or unlawful if used while driving.

Precautions Before Connecting the System

• Warning: Securely install the product on the front windshield to prevent it from falling off, which could cause an accident. Periodically inspect the installation.
• Pioneer recommends installation by authorized service personnel with specialized training.
• Secure all wiring with cable clamps or electrical tape, ensuring no bare wires are exposed.

Precautions Before Installation

• Warning: Do not install the product where it may:
  • Obstruct the driver's vision.
  • Impair vehicle operating systems or safety features (airbags, hazard lamps, etc.).
  • Impair the driver's ability to operate the vehicle safely.
• Do not install near airbag deployment zones. Consult your vehicle owner's manual for airbag deployment areas.
• Caution: Use only specified parts for proper installation. If parts are missing or incompatible, consult your dealer. Using non-specified or incompatible parts may damage the product or cause it to detach.
• Do not install in places subject to high temperatures or humidity, such as near heaters, vents, air conditioners, or in areas exposed to rain (e.g., near doors).

Packaging Contents

The package includes:

• 1N Dash Camera [VREC-H120SC/VREC-H120SC-D] with mount and double-sided adhesive
• 1N Power Adapter
• 1N Power cable [3.5 m]
• 1N Electrostatic film
• 1N Quick Start Guide

Product Appearance

The dash camera has the following components:

• 1. Peel-OFF adhesive layer
• 2. Power input
• 3. microSD™ card slot
• 4. Camera Lens
• 5. Speaker
• 6. Air vents for heat dissipation
• 7. Dash Camera Mount
• 8. Function button
• 9. Mic
• 10. LED

Technical Specifications

Installation

Install the microSD Card

Note:

• Use a Class 10 or above microSD card for proper functionality.
• Video recording is not possible without a microSD card.
• You will be prompted to format the microSD card upon its first insertion into the dash camera.

Specified Installation Position on Front Windshield

When installing the product, consider the following for placement on the front windshield, ensuring compliance with local laws and regulations:

• Install where it does not obstruct airbag deployment zones. The ideal location is behind the rear-view mirror, out of the driver's direct view.
• Position the product so it is within 20% of the windshield's top edge (excluding areas covered by weatherstrips, moldings, etc.) or in the shadow of the rear-view mirror. Note that "20%" is an estimate; adhere to local laws.
• Ensure the camera lens is within the wiper's wiping range.
• Position the lens so it does not overhang the sunshade or black ceramic lines/pattern.
• Mount the product horizontally, facing forward and side-to-side.
• Ensure the USB power cable can be routed without strain.

Diagrams illustrate recommended placement, showing angles, directions, and proximity to vehicle components like A-pillars and airbags.

Installing the Dash Camera

1. Clean the installation area: Wipe the area with a clean cloth to remove dirt and oil.
2. Install the product:
   • Peel the protective film from the dash camera mount's double-sided tape.
   • Mount the product at the specified position on the front windshield and press firmly.
   • Caution: Ensure the windshield is clean and dry before mounting. The double-sided tape is very strong and should not be reapplied. For optimal adhesion, leave the product undisturbed for 24 hours.
   • Note: Remove the protective film from the camera lens.
3. Connecting the cables:
   • Connect the power cable to the power adapter and the main unit.
   • Connect the USB power adapter to the vehicle's cigarette lighter socket. Ensure a secure connection by fully inserting it. (Socket location varies by vehicle).
   • Warning: Use only a 12V vehicle accessory cigarette lighter socket or USB port to prevent damage or malfunction.
   • Caution: The accessory socket can become very hot. The power cable tip may melt or short circuit if plugged into a hot socket. Ensure the socket is cool before connecting.
   • Adjust the camera angles for optimal external video display.

Direct Connection with Vehicle Battery (Parking Mode)

To enable parking mode, you may need to purchase and install a Hardwire Kit, ideally by a trained technician. This allows the dash camera to detect and record vehicle movement via vibration even when the engine is off.

Note: If switching back to a USB power adapter from a Hardwire Kit, perform a factory reset via the app or GUI to ensure proper operation.

Wiring:

• Ground (Black): Connect securely to a metal part of the vehicle body, preferably near the navigation unit to minimize noise.
• Battery power supply (Yellow): Connect to the battery's power circuit, regardless of the engine switch position.
• Accessory power supply (Red): Connect to the circuit powered when the vehicle's engine switch is in the ACC position. Do not connect if the vehicle lacks an ACC position, as this may drain the battery.

Diagrams illustrate wiring connections for Ground, Battery (+), and Accessory (+), including fuse placement and connection points.

Connection Precautions:

• To prevent damage, securely connect the black ground wire to the vehicle's metal body first. Use separate ground wires for high-current devices. Loose or detached screws can cause damage or fumes.
• [Diagram shows ground wire connection to vehicle body]

Button Functions

The power button can be used for various functions based on press duration or number of presses:

System Indicator Display

The LED indicator shows the status of the device:

Recording events include over-speeding and impact detection (sudden jerk or vibration). Error messages may indicate issues like a missing microSD card during boot-up or Wi-Fi being off.

Connecting to Dash Camera App

1. Scan the QR code to download the app from Google Play or App Store.
2. Download and install the app.
3. Sign up and follow the pairing instructions.
4. Default Wi-Fi Name (SSID): Pioneer_H120SC_XXXX
5. Default password: 12345678

Note: XXXX is a unique alphanumeric identifier. The app supports Android™ OS version 11+ and iOS version 13+.

Trademarks and Copyrights

• USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries, used under license.
• App Store is a service mark of Apple Inc.
• Android and Google Play are trademarks of Google LLC.
• microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC.