Blaupunkt BP2007 Evaporative Air Cooler

Introduction

Dear consumer, please read these instructions carefully before use in order to avoid damage due to incorrect use and to better understand the functions of this product. Please pay particular attention to the safety guide.

If you pass the device on to a third party, these Operating Instructions must also be handed over. Please keep them for future references.

A copy of this instruction manual in various languages is available on our website: www.avanteuropa.es.

Important Safeguards

1. Use as per the rating voltage on the product.
2. Do not repair or remake the appliance by yourself; it should be repaired by a qualified technician.
3. Do not operate the appliance with wet hands to avoid a shock hazard.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid damage or hazard.
5. When the appliance is not in use, switch off and unplug it.
6. Do not insert foreign objects into the air outlets and inlets to avoid damage.
7. Do not use the appliance near explosive and combustible gas. Avoid long-term direct solar radiation.
8. Use the appliance only on a flat surface.
9. Do not use outdoors.
10. The water tank level should not be over the "MAX" scale at any time. When humidifying, the total level of water tank should not be below the "MIN" scale.
11. After adding water to the water tank, do not tilt or knock it over when you put or move it. If you want to move, please push slowly from the side to avoid spilling.
12. Do not tilt the appliance. If it is toppled over and there is some water in the body, unplug the power supply first. Then send it to the repair department or after-sales service for overhaul.
13. Do not cover the air vent.
14. Clean the appearance with a lightly damp cloth. Do not use any type of detergents or solutions. Do not rinse the appliance.
15. Do not place air outlets and inlets near a wall or curtain.
16. Do not knock or shake the body when using; otherwise, it may stop automatically.
17. The water in the tank can easily metamorphose and develop an odor in summer; renew the water frequently.
18. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
19. Children should be supervised to ensure that they do not play with the appliance.
20. To avoid the risk caused by instability of the unit, you must fix the castors firmly according to the manual.
21. Should it be necessary to move the unit after the water has been added, roll gently to the required position and activate the bracket of the castors.
22. The power cord is a "Y" type connection and must be changed by professional technicians if necessary.
23. This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.
24. Keep the appliance and its cord out of reach of children aged less than 8 years.
25. Do not use this appliance with a programmer, counter, or another device which can automatically turn it on because if the appliance is covered or incorrectly positioned, there is a danger of fire.

Technical Specifications

Rated Voltage/Frequency: 220-240V~ 50/60Hz

Power: 80W

Diagrams and Controls:

The product includes visual aids for assembly and operation:

• Fig-1: Illustrates the base of the air cooler with four designated holes for wheel installation.
• Fig-2: Shows an icebox being placed into the water tank compartment.
• Fig-3: Depicts the water tank with iceboxes inside, ready for water to be added.
• Fig-4: Shows the water tank with clear markings for the maximum ("MAX") and minimum ("MIN") water levels.

The air cooler features several operating modes and functions, indicated by icons on the control panel or remote:

• Ion: Activates the ionizer function.
• Cooler: Engages the evaporative cooling function.
• Swing: Controls the oscillation of the air outlet louvers.
• Timer: Sets the operating time.
• Speed: Adjusts the fan speed (Low, Medium, High).
• ON/OFF: Powers the unit on or off. A small remote control icon is also associated with this function.

Assembly of the Air Cooler

1. Installation of Wheels: Place the 4 wheels into the holes located at the base of the air cooler. Insert the wheels firmly into the air cooler's body (Refer to Fig.1).
2. Filling Water: Turn the water tank lock to the horizontal position, then remove the water tank. Place the iceboxes inside and add clean tap water to the large section (Refer to Fig.-2 and -3). Ensure that the water level in the tank does not exceed the "MAX" level indicated on the back of the tank (Refer to Fig.-4).

Your cooler draws water from the narrow section and pumps it onto the cooling pad. Water flowing through the cooling pad spills into the large section of the tank. This cycle allows the water to absorb dust and dirt from the air. The filter in the center of the tank filters and cleans the water; it should be in place while the device is operating. Push the water tank back into its housing and turn the tank lock to the vertical position.

Insert the plug into the electrical outlet. The LED indicator showing the room temperature will light up with a beep sound, and the air cooler will enter standby mode. The unit's functions can be controlled via the on-board control panel or the remote control.

Operating the Air Cooler

1. ON/OFF: Press the ON button on the control panel or the ON/OFF button on the remote control to turn the unit on. The unit will start at an intermediate speed and then drop to a slow speed. To return to standby, simply press the OFF button on the control panel or the ON/OFF button on the remote control.
2. Speed: Wind speed can be adjusted to 3 levels: Low, Medium, or High, by pressing the 'Speed' button. Each press of the 'Speed' button will display an icon on the LED screen indicating the current speed level.
3. Timer: Press the ‘Timer' button to set the fan running time between 1 and 12 hours, after which the unit will switch to standby. Each press of the button increases the hours by one, and the time indicator will light up on the screen. To cancel the timer, press the button until the indicator shows "00".
4. Swing: Press the 'Swing' button to change the wind direction. The swing icon will appear on the screen when the function is activated. Press the button again to stop the oscillation. The vertical direction of airflow can be adjusted manually by directing the outlet louvers up and down.
5. Cooler: To activate the air cooler function, press the “Cooler” button. The water pump will draw water from the tank and pour it onto the cooling pad. The cooling pad absorbs the water's heat, and the evaporated air is blown out by the fan. The cool breeze reduces the temperature, creating a relaxing cooling effect. Caution: If the water level is low or there is no water in the tank, do not activate the 'Cooler' function. Check the water level and add water if needed. Replace stale water with fresh water. It is recommended to replace the water in the tank at least once a week.
6. Ionizer: Press the 'Ion' button to activate the ionizer function. The ion icon on the screen will light up, initiating the release of negative ions. These ions attract tiny airborne particles like dust pollen and mold spores, making them too heavy to remain suspended. This feature helps to provide cleaner air.
7. Remote Control: The remote control uses a CR2025 button cell battery. Before use, pull out the plastic card inserted into the battery compartment.

Operating the Water Tank

Check the water level in the tank frequently. Ensure the water level is below the "MIN" marking on the water tank. Activating the ‘Cooler’ function with insufficient water may cause the water pump to malfunction and void your product's warranty.

Before refilling water, turn your unit to the "Off" position by pressing the switch located on the back panel and unplug the power cord.

Using the Ice Tubes

To enhance the cooling effect of your fan, you can use the supplied ice tubes. Before use, fill them with water and place them in your refrigerator's freezer compartment for a few hours. Then, place them in the large section of the tank and add water to the "MAX" level. Using ice tubes will lower the airflow temperature, creating a more effective cooling effect.

Cleaning and Maintenance

After prolonged operation, dust accumulated in the dust filter or cooling pad can affect airflow. Therefore, regular cleaning of your fan is recommended. Follow the steps below to clean your device.

Turn off the unit and unplug the power cord before cleaning and maintenance.

1. Dust Filter: To remove the dust filter, first remove the screw. Then, simply press the locks with both hands and pull the filter out. Use a neutral cleaning agent and a brush to clean dust and dirt from the filter. To reattach the clean filter, place the bottom of the filter first, then push the upper part until it is locked tightly.
2. Cooling Pad: After removing the dust filter, you can access the cooling pad. Press the lock in the middle and gently pull out the pad. Use a clean or soft brush to remove dust and dirt from the pad. Rinse with water if needed and let it dry in open air. Never use any chemical cleaning solution that can harm the pad.
3. Water Tank: Turn the water tank lock to the horizontal position and pull out the tank. Use mild cleaning agents for cleaning. Wash with water and rinse the tank's housing area by gently pushing. Turn the lock to the vertical position.
4. Exterior Cleaning: Clean the exterior case of the fan with a soft, damp cloth, avoiding the control panel. Never use harsh cleaning agents that can damage the case. Ensure the unit is dry before operating it. Caution: Never let water come into contact with the control panel. Always clean it with a soft, dry cloth.

Guarantee Document

Thank you for purchasing this Blaupunkt product. This device has been meticulously checked in all its components, so we guarantee correct operation. For this to be the case, please read the instruction book carefully, as this will contribute to the best performance of this article.

R.S.A. guarantees the buyer of this product a total warranty of TWO YEARS, governed by the established conditions found in Royal Legislative Decree 1/2007 of 16 December, which approves the revised text of the General Law for the Defense of Consumers and Users (articles 114 to 127). R.S.A. is committed to making repairs completely free, including labor and spare parts.

The Technical Assistance Service will resolve any repairs that may be required by this apparatus. Carefully review the included INSTRUCTION BOOK regarding the use, maintenance, and conservation of the device. Any anomaly that could occur due to non-observance of these instructions will not be covered by the warranty. The date of sale of the device, for warranty period purposes, will be that which appears on the purchase invoice.

Guarantee Operation: Regarding all compliance defects detected by technical assistance, which manifest within six months of the delivery of the goods, it is assumed they already existed on that date, and the intervention will be completely free (unless this hypothesis is incompatible with the nature of the conformity defect). During the following eighteen months, the user must demonstrate that the lack of conformity was present at the time of delivery.

Declaration of Conformity

Manufacturer Name: RAMSONS, S.A.

Address: Pedro Muñoz Torres n° 1, 41006 SEVILLA

We declare under our responsibility that the product:

Product Description: EVAPORATIVE AIR COOLER

Model: BP2007

Brand: BLAUPUNKT

It complies with European Union legislation in compliance with the 2004/108/EU guidelines.

The standards apply:

• EN 55014-1: 2006+A1:+A2:
• EN 55014-2: 1997+A1:+A2:
• EN 61000-3-2:2006+A1:+A2:
• EN 61000-3-3:2013

Name: Vivek Sadhwani

Position: Manager

Date: 26 de Diciembre 2020

Signature: [Signature Placeholder]

Manufacturer Details (for warranty/service): Ramsons, S.A., Pedro Muñoz Torres N° 1 NAVES HYTASA, 41006 SEVILLA. Tel: 954 933 404, Fax: 954 660 533. USER.

Date of Sale: [Seller's signature and stamp]

IMPORTANT: To make the guarantee effective, the SELLER must fill out, sign, and stamp this Certificate. To receive assistance under the conditions set forth in this certificate, please submit this document along with the Purchase Invoice to the Authorized Technical Service.

Information on Recycling

Disposal of old appliances: The European Directive 2002/96/EC on waste electrical and electronic equipment (WEEE) establishes that old appliances cannot be disposed of as unsorted municipal waste. Appliances must be collected separately to optimize the recovery and recycling of their materials and reduce the impact on human health and the environment.

The symbol of a "container with wheels" crossed out on the product reminds you of your obligation to collect the device separately when disposing of it.

Consumers should contact their local authority or retailer for information on the correct disposal of their old appliance.