Fisher-Price HBW32 Soccer Goal
Model: HBW32
Important: Keep these instructions for future reference.
About This Product
This document provides assembly instructions and important information for the Fisher-Price HBW32 Soccer Goal.
Before You Begin
Adult assembly is required.
Tool needed for assembly: Phillips screwdriver (not included) ?.
Estimated assembly time: Approximately 20 minutes ⏱️.
Care and Maintenance
- The frame and net may be wiped clean using a mild cleaning solution and a damp cloth.
- Do not use bleach.
- Rinse clean with water to remove residue.
- Do not immerse this toy in water.
- To prolong the life of the net, store this toy indoors.
- Periodically check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. ✔️
Soccer Ball Inflation
- Locate the valve hole on the soccer ball.
- Inflate it using a manual air pump and standard needle (not included).
- Inflate the soccer ball to a circumference of 15.8 inches (40 cm), until firm. Do not over-inflate.
Parts List
| Part Description | Quantity |
|---|---|
| M3 x 10 mm Screw | 2 |
| M5 x 28 mm Screw | 6 |
| M5 Lock Nut | 6 |
Assembly Instructions
Step 1
Connect two frame pieces. Insert an M5 x 28 mm screw through the designated holes of the two frame pieces and secure it with an M5 Lock Nut. Hold the lock nut in place with your thumb while tightening the screw.
Step 2
Connect another frame piece to the assembly. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 3
Connect two straight frame pieces. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 4
Attach the net to the frame. Locate the short sleeves on the sides of the net and fit a sleeve onto a side tube of the frame.
Step 5
Continue attaching the net to the frame by sliding the net's sleeves onto the frame tubes.
Step 6
Continue attaching the net to the frame.
Step 7
Continue attaching the net to the frame.
Step 8
Bring the two main frame sections together.
Step 9
Connect the frame sections. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 10
Continue securing the frame connections. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 11
Continue securing frame connections. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 12
Continue securing frame connections.
Step 13
Secure the top frame bar. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 14
Secure the other side of the top frame bar. Insert an M5 x 28 mm screw and secure it with an M5 Lock Nut, holding the nut while tightening the screw.
Step 15
Attach the base support with wheels. Use two M3 x 10 mm screws to attach the wheel assembly to the main frame.
Step 16
The assembly is complete. The soccer goal may include additional target nets for practice.
Contact Information
For customer service and support, please refer to the contact details for your region:
- United States: Fisher-Price, Inc., 1-800-432-5437
- Canada: Mattel Canada Inc., 1-800-432-5437
- Mexico: Mattel de México, S.A. de C.V., Tels.: 59-05-51-00 Ext. 5206 or 01-800-463-59-89
- Chile: Mattel Chile, S.A., Tel.: 1230-020-6213
- Venezuela: Servicio al consumidor Venezuela: Tel.: 0-800-100-9123
- Argentina: Mattel Argentina, S.A., Tel.: 0800-666-3373
- Colombia: Mattel Colombia, S.A., Tel.: 01800-710-2069
- Peru: Mattel Perú, S.A., Tel.: 0800-54744. E-mail Latinoamérica: servicio.clientes@mattel.com
- Brazil: Mattel do Brasil Ltda., Serviço de Atendimento ao Consumidor: fone 0800 575 0780. E-mail: sac.matteldobrazil@mattel.com
- Australia: Mattel Australia Pty. Ltd., Consumer Advisory Service 1300 135 312
- New Zealand: (Address provided, no direct phone number listed in this section)
- Asia: Mattel East Asia Ltd., Tel.: (852) 3185-6500
- Malaysia: (Address provided)
- Netherlands: Mattel Europa B.V. (Address provided)
- South Africa: Mattel South Africa (PTY) LTD (Address provided)
Website: service.mattel.com
