Onn. Wireless Party Speaker PA2323 Quick Start Guide

What's in the Box?

• 1 AC charging cable
• 1 Quick Start Guide
• 1 Wireless Party Speaker

Get to Know Your Wireless Party Speaker

Familiarize yourself with the controls and features:

1. LED Display
2. Source button
3. Bluetooth/Party sync button
4. Power button
5. Master volume control
6. Previous track button
7. Play/Pause button
8. Next track button
9. Wall light button
10. Bass boost button
11. Light effect button
12. 3.5 mm AUX input port
13. Reset button
14. USB Emergency power port
15. AC charging port
16. Microphone volume control
17. Guitar volume control
18. 1/4" Guitar port
19. 1/4" Microphone port

Placement Tips:

• For pole-mounting, installation must be done by qualified persons using safe rigging standards.
• Always follow the instruction and precaution advice from the speaker stand manufacturer.
• Place the speaker on a flat, stable surface with the rubber feet side down. Avoid sitting or leaning on the speaker to prevent tip-over.

Let's Get Started!

Charging the Speaker

The battery icon will flash while charging and remain solid white when fully charged. For optimal battery performance, charge fully if not using the speaker for an extended period. Recharge at least once every six months.

Battery: Built-in Rechargeable Li-ion Battery: 14.8V 2500mAh

Connect Your Wireless Party Speaker

Bluetooth Connection

Connect to your device via Bluetooth. Search for "onn. Party Speaker L" and pair.

Party Sync Mode (Stereo)

1. Power on both speakers and press and hold the Party Sync button on each speaker.
2. When paired, you will hear left and right channel audio. The first speaker paired becomes the master.
3. Pair your mobile device with the master speaker via Bluetooth.
4. Press and hold the Party Sync button again to disconnect.

Range: Up to 10 meters (33 feet) for Bluetooth connection.

Wired Use

Connect the speaker to your audio source using a 3.5 mm AUX cable (not included). In AUX mode, only the audio source device can control playback. Buttons like Play/Pause cannot be used.

Listen to Your Favorite Radios (FM Mode)

1. Press the Source button to select FM mode.
2. Press the Previous/Next track buttons to scan and select FM stations.
3. Press and hold the Previous/Next track buttons to seek the next available station.
4. To save a station, press and hold the Play/Pause button. The LED screen will show "SAV". You can change the preset number by pressing the Previous/Next track buttons.
5. Press the Play/Pause button repeatedly to select a saved radio station.

Sing Along or Play Guitar

Connect your Microphone or Guitar (not included) to the MIC or GUITAR port respectively.

• Play guitar through the speaker.
• Sing along with the microphone while music plays via Bluetooth, AUX, or FM.
• Adjust microphone or guitar volume using the respective volume control knobs.

Lighting Effects

• Press and hold the Light button to turn the main light on/off.
• Press the Light button once to turn the light effect on/off.
• Quickly press the Light button to cycle through 6 different multicolor LED lighting modes.

Charge Your Device

Use the USB-A emergency power port (5V-2.1A output) to charge other smart devices when the Wireless Party Speaker is powered on.

Important Safety Instructions & Precautions

• Do not sit or lean on the speaker or push it sideways to avoid tip-over and potential damage.
• Place the speaker on a flat, stable surface with the rubber feet down.
• Always keep the AC charging port dry before connecting power.
• To ensure waterproofing, always close the protective cover securely.
• This equipment is waterproof only when placed vertically; it is not waterproof when placed sideways.
• Do not open the unit; refer servicing to qualified personnel.
• Avoid exposing the apparatus to rain or moisture.
• Use only with the specified accessories.
• Unplug during lightning storms or when unused for long periods.
• Do not install in confined spaces without proper ventilation.
• The equipment should be used at a maximum ambient temperature of 35°C.
• Battery Safety: Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in fire or hot ovens, or crush/cut them. Avoid extremely high or low temperatures surrounding the battery.

Compliance Information

This device complies with Part 15 of the FCC Rules and ISED Canada License-exempt RSS Standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Party Sync Mode Compatible Models: