Rogue Echo Dog Sled Assembly Instructions and Safety Guide

Important Safety Information

Disclaimer

Resistance training, gymnastics training, and activities at height are potentially dangerous and may lead to severe injury or even death. Use common sense when training, obtain instruction in the proper execution of movements, and understand your limitations. This equipment must only be used by competent and responsible persons. Obtaining instruction in appropriate techniques and methods of use is your own responsibility. You assume all risks and responsibilities for all damage, injury or death which may occur during or following incorrect use of this equipment in any matter whatsoever. Rogue Fitness bears no liability beyond the replacement value of the equipment in question.

Warning

Misuse of this product can result in severe injury. Both Rogue Fitness and buyer disclaim any express or implied warranty, including, without limitation, warranties or merchantability and/or fitness for a particular purpose with respect to the equipment. Buyer assumes all liability to use of equipment.

Rogue Fitness 545 E 5th Ave. Columbus, Ohio 43201 Customer Service: 614-358-6190 Team@RogueFitness.com

Included Parts

1. Dog Sled Pan (Qty: 1x) - The main base of the sled, a metal structure with integrated runners and attachment points.
2. Dog Sled Upright Handles (Qty: 2x) - Two vertical poles designed to be inserted into the sled pan.
3. Plate Load Post (Qty: 1x) - A central vertical post for loading weight plates.
4. 1/2" x 1" Hex Bolt (Qty: 8x) - Standard hex bolt.
5. 1/2" Lock Washer (Qty: 8x) - Washer designed to prevent loosening.
6. 1/2" Nyloc Hex Nut (Qty: 8x) - Self-locking nut.
7. 1/4" x 3/8" Phillips Head Screw (Qty: 16x) - Small Phillips head screw.
8. 1/4" Nyloc Hex Nut (Qty: 16x) - Small self-locking nut.
9. Plastic Runner (Qty: 2x) - Protective strips to be attached to the bottom of the sled.
10. Stiffener Brace (Qty: 2x) - Metal braces used for structural reinforcement.
11. 5/8" x 1-1/2" Hex Bolt (Qty: 1x) - Larger hex bolt.
12. 5/8" Lock Washer (Qty: 1x) - Larger washer designed to prevent loosening.

Assembly Instructions

Step 1: Attaching Runners and Braces

Note: If Plastic Runners [9] were not purchased, proceed to Step 1-B.

Attach Plastic Runners [9] to the Dog Sled Pan [1] using 1/4" x 3/8" Phillips Head Screws [7] and 1/4" Nyloc Hex Nuts [8].

Install Stiffener Braces [10] into the Dog Sled Pan [1]. Secure using 1/2" x 1" Hex Bolts [4], 1/2" Lock Washers [5], and 1/2" Hex Nuts [6].

Diagram 1-A shows runners [9] being attached to the underside of the sled pan [1] using screws [7] and nuts [8]. It also shows stiffener braces [10] being fitted into slots on the pan [1] and secured with bolts [4], washers [5], and nuts [6].

Diagram 1-B depicts the sled pan [1] with the stiffener braces [10] already attached and secured by bolts [4], washers [5], and nuts [6].

Step 2: Attaching Load Post and Handles

Attach the Plate Load Post [3] to the Dog Sled Pan [1]. Secure using the 5/8" x 1-1/2" Hex Bolt [11] and 5/8" Lock Washer [12].

Insert the Dog Sled Upright Handles [2] into the sockets on the desired side of the pan for use.

Diagram 2-A illustrates the plate load post [3] being attached vertically to the front of the sled pan [1] using a large bolt [11] and washer [12].

Diagram 2-B shows the two upright handles [2] being inserted vertically into the designated sockets on the sides of the sled pan [1].

	Rogue FM-HR Functional Trainer Twin Weight Stack Assembly Manual This document provides comprehensive assembly instructions, a detailed parts list, and essential safety information for the Rogue FM-HR Functional Trainer with Twin Weight Stacks. Learn about included tools and proper setup procedures from Rogue Fitness.
	ROGUE FM-HR Functional Trainer Twin Weight Stack Assembly Manual Comprehensive assembly manual for the ROGUE FM-HR Functional Trainer with Twin Weight Stack. Includes safety warnings, parts list, tools required, and detailed step-by-step instructions for proper setup.
	The Bella Complex Challenge: Rules, Scoring, and Submission Guidelines Comprehensive guide to The Bella Complex Challenge hosted by Rogue. Details include challenge scoring, deadlines, eligibility by division and age group, required equipment, permitted and prohibited items, movement standards for Clean, Shoulder to Overhead, and Front Squat, the competition flow, and detailed video submission requirements.
	Rogue Home Timer Quick Start Guide A concise guide to setting up and operating the Rogue Home Timer, featuring interval training modes, Bluetooth connectivity, and customizable workout programs.
	Rogue Echo Bike Parts List & Diagram \| Rogue Fitness Find the official parts list and diagram for the Rogue Echo Bike. Identify all components, including stabilizers, wheels, and hardware, for maintenance and assembly.
	Rogue Invitational 2025: Official Workout Standards and Submission Guidelines Detailed movement standards, equipment requirements, and video submission guidelines for the Rogue Invitational 2025 competition, featuring workouts from Rogue, GORUCK, and btwd.
	Rogue Performance Monitor User Guide and Specifications Comprehensive guide to the Rogue Performance Monitor, detailing button functions, display modes, workout data, reset procedures, and FCC compliance information.
	The Waiter Walk Challenge: Rules and Submission Guidelines Detailed rules, divisions, equipment requirements, movement standards, and video submission guidelines for The Waiter Walk Challenge by Rogue.