Electronic Cabinet Lock User Manual
Features
- One management card and 14 user cards can be registered.
- Swipe card to unlock automatically.
- Low-power design.
- Low battery power alarm.
- Small size, easy to install.
1. Download TT Lock App and Register
- Search for "TT Lock" in the app store or scan the QR code.
- Click "Register", enter your phone number or email, set a password, fill in all information, and click "Register".
- Enable Bluetooth and GPS on your phone.
2. Restore Factory Settings
Insert the setting needle into the setting hole until "Beep, Beep" is heard. Factory settings will be restored, and all data cleared.
3. Bind the Phone
After the lock is factory reset, open the TT Lock app, click "Add Lock", then "ALL Lock". Wake up the lock with the setting needle and click "+".
4. Add IC Card
Click "Cards", then "Add Card". Enter a name and select the expiration period. Click "OK". Place the card close to the lock and swipe the sensor area. Two "Beep, Beep" sounds indicate successful addition. Note: Operation must be near the lock.
5. Edit IC Cards
Click "Cards", select the card to be renamed, click "Name", and enter the new name.
6. Change IC Card Validity Period
Click "Cards", select the IC card, choose the valid time, enter the new start and end times, and click "OK". Note: Operation must be near the lock.
7. Unlock
- App Unlock: Click the unlock icon in the App. Note: Operation must be near the lock.
- IC Card Unlock: Place the added IC card in the swipe area.
8. Closed Lock
Automatic lock for 5 seconds after unlocking.
9. APP eKeys
Click "Send ekey", fill in the recipient's phone number and other information, and click "Send". The receiver can open the TT Lock app, unlock, and query the lock record.
10. Authorized Administrator
Click "Authorized administrator", then "Create administrator". Fill in the recipient's account number, name, time, and other information, then click "Send". Notes: (1) Operation must be near the lock. (2) The authorized administrator can unlock, add cards, and query records.
11. Unlock Record
Select locks in the App and click "Records" to view all records.
12. Delete IC Cards
Click "Cards", select the card to remove, and click "Delete". Note: Operation must be near the lock.
13. Delete Mobile Phone Administrator
Select locks in the App that do not require administrative permission, click "Settings", click "Delete", enter the password, and click "OK". Note: When the administrator is deleted, the lock is restored to factory settings.
14. Low-Power Alarm
When unlocking the lock, the device will emit 5 "Beep. beep beep.beep..." sounds. Please replace the battery.
15. Technical Parameters (Model: F019)
| Power Supply | 3x AAA alkaline battery |
| Low Battery Warning | 3.8V |
| Working Voltage | 3.5V~5.4V |
| Static Current | <35 μA |
| Working Current | <200 mA |
| Unlock Time | In 5s |
| Working Temperature | +10~70 °C |
| RFID Card | Mifare-1 card, 13.56MHz |
| Max RFID Cards | 15 cards |
| Unlock Method | Contactless |
TYPE-C External Port Diagram
When the batteries are depleted, you can use the TYPE-C external port for emergency power to unlock the lock, then replace the battery.
Installation Guide for Drawers
1) Lock body and latch positioning size chart
Dimensions:
- 33.5 (distance from inside board to the center of the screw hole of the striking plate)
- A (Clearance between the front pumping plate and the top pumping plate)
- 32.25 (distance from inside board to the center of the screw hole of the striking plate)
2) Install panel and lock body
- Mark the position line according to the drawing, place the lock body at the proper height, and then fix it.
- Insert the battery and test if the lock works, then fix the cover.
3) Install the striking plate
- Mark position line 1 according to the drawing and align the striking plate so its center is on position line 1.
- Mark position line 2 according to the drawing (distance should be 33.5 plus board thickness), ensuring the latch faces the door and the center of the installation hole is on position line 2.
- Fix the striking plate.
Cabinet Installation Guide
1) Lock body and latch positioning size chart
Dimensions:
- 33.5 (distance from inside board to the center of the screw hole of the striking plate)
- A (Clearance between the door panel and the left side panel)
- 32.25 (distance from inside board to the center of the screw hole of the striking plate)
2) Install panel and lock body
- Mark the position line according to the drawing, place the lock body at the proper height, and then fix it.
- Insert the battery and test if the lock works, then fix the cover.
3) Install the striking plate
- Mark position line 1 according to the drawing and align the striking plate so its center is on position line 1.
- Mark position line 2 according to the drawing (distance should be 33.5 plus board thickness), ensuring the latch faces the door and the center of the installation hole is on position line 2.
- Fix the striking plate.
Sliding Door Cabinet Installation Guidelines
1) Lock body and latch positioning size chart
Dimensions:
- 11.5 (distance from inside board to the center of the screw hole of the striking plate)
- 54 (distance from inside board to the center of the screw hole of the striking plate)
2) Install panel and lock body
- Mark the position line according to the drawing, place the lock body at the proper height, and then fix it.
- Insert the battery and test if the lock works, then fix the cover.
3) Install the striking plate
- Mark position line 1 according to the drawing and align the striking plate so its center is on position line 1.
- Mark position line 2 according to the drawing (distance should be 11.5 plus board thickness), ensuring the latch faces the door and the center of the installation hole is on position line 2.
- Fix the striking plate.
