DoorBird D1100E Technical Drawings and Assembly Instructions
Product: DoorBird D1100E IP Video Door Station
Version: 1.3, Minimum Hardware Version: 1.3
Assembly Instructions and General Notes
English (EN)
- The front panel must be exactly 3 mm (0.12 in) thick.
- The main electrical unit of the IP video door station must be pressed flat against the front panel. A gasket is attached on the main electrical unit.
- Ensure sufficient space underneath the main electrical unit for Phoenix and CAT cabling (at least 50 mm / 1.97 in).
- An area of approximately 5 mm (0.2 in) should be left around each module for ease of installation.
- The connection cable between the call button and the technical unit has a length of 40 mm (1.6 in).
German (DE) Summary
The German section provides equivalent instructions regarding front panel thickness, main unit mounting, cabling space, module spacing, and connection cable length.
Technical Drawings and Component Dimensions
D1100E Main Unit Dimensions
Overall Front View and Side View of the main IP Video Door Station unit.
View | Dimension | Value (mm) | Value (in) | Notes |
---|---|---|---|---|
Front View | Overall Height | 95.15 | 3.74 | |
Distance from top to camera center | 67.70 | 2.66 | ||
Distance from top to top of camera lens | 31.00 | 1.22 | ||
Camera Lens Diameter | Ø41.50 | 1.63 | ||
Horizontal distance between button centers | 43.00 | 1.69 | ||
Corner Radius | R0.50 | 0.02 | ||
Side View | Overall Depth | 36.70 | 1.44 | |
Distance from front to mounting bracket | 23.00 | 0.90 | ||
Mounting Plate Area Width | 2.13 | N/A | ||
Rear View / Mounting Plate Width | 115.20 | 4.54 |
Diagram shows mounting hardware: 2x M3x20 female threaded bushes with 0.39in thread length.
Diagram shows mounting hole pattern with dimensions: 3.90 mm (0.15 in), 7.80 mm (0.31 in), R0.50 mm (0.02 in), 4.80 mm (0.19 in).
Fingerprint Reader Module / Fingerabdrucklesermodul Dimensions
Details for the Fingerprint Reader Module.
View | Dimension | Value (mm) | Value (in) | Notes |
---|---|---|---|---|
Side View | Mounting Stud Type | 2x M3x18 welding studs | ||
Flange Thickness | 3.00 | 0.12 | ||
Stud Protrusion Length | 4.00 | 0.16 | ||
Total Stud Length | 21.00 | 0.83 | ||
Top View | Distance from top edge to sensor center | 17.00 | 0.67 | |
Module Body Height | 38.00 | 1.50 | ||
Mounting Plate Height | 34.00 | 1.34 | ||
Distance from left edge to sensor center | 19.00 | 0.75 | ||
Mounting Plate Width | 34.00 | 1.34 | ||
Corner Radius | R0.50 | 0.02 | ||
Mounting Hole Diameter | 2.00 | 0.08 | ||
Front View | Visible Front Part Height | 22.90 | 0.90 | |
Overall Width | 49.30 | 1.94 | ||
Overall Width (alternative measurement) | 50.30 | 1.98 |
Keypad Module with 12 Keys / Keypad Modul mit 12 Tasten Dimensions
Details for the 12-key Keypad Module.
View | Dimension | Value (mm) | Value (in) | Notes | |
---|---|---|---|---|---|
Top View | Overall Width | 75.90 | 2.99 | ||
Button Grid Width | 75.70 | 2.98 | |||
Overall Height | 55.30 | 2.18 | |||
Button Grid Height | 62.50 | 2.46 | |||
Spacing between keys | 6.60 | 0.26 | |||
Distance from right edge to last column | 7.10 | 0.28 | |||
Key arrangement | 4 rows x 3 columns (12 keys total) | ||||
Side View | Mounting Stud Type | 4x M3x18 welding studs | |||
Flange Thickness | 3.00 | 0.12 | |||
Radius | R0.12 | N/A | |||
Front View (Mounting Plate) | Mounting Plate Height | 84.00 | 3.31 | ||
Overall Height | 98.20 | 3.87 | |||
Distance from top edge to button grid | 14.10 | 0.56 | |||
Spacing between keys | 6.50 | 0.26 | |||
Key Detail View | Spacing between keys | 6.50 | 0.26 | ||
Key Detail View | Corner Radius of Key Area | R3.00 | 0.12 |
Disclaimer
It is possible that this manual still contains typographical errors or printing errors. The information in this manual will be checked regularly and corrections will be made in the next version. We accept no liability for errors of a technical or printing nature and their consequences.
German: Es ist möglich, dass die vorliegende Anleitung noch drucktechnische Mängel oder Druckfehler aufweist. Die Angaben in dieser Anleitung werden jedoch regelmäßig überprüft und Korrekturen in der nächsten Ausgabe vorgenommen. Für Fehler technischer oder drucktechnischer Art und ihre Folgen übernehmen wir keine Haftung.