Output Specifications

Parameter	Value
Output power capacity	1.2kWatts / 2.2kVA
Max Configurable Power (Watts)	1.2kWatts / 2.2kVA
Nominal Output Voltage	230V
Output Frequency (sync to mains)	50/60 Hz +/- 1 Hz Sync to mains
Topology	Standby
Waveform type	Stepped approximation to a sinewave
Transfer Time	6 ms typical : 10 ms maximum

Input Specifications

Parameter	Value
Nominal Input Voltage	230V
Input frequency	50/60 Hz +/- 5 Hz Auto-sensing
Input Connections	Schuko
Cord Length	1.2 meters
Input voltage range for main operations	140 - 300V
Number of Power Cords	1
Input Power Factor at Full Load	0.54

Batteries & Runtime

Parameter	Value
Battery type	Lead-acid battery
Typical recharge time	8 hour(s)
Expected Battery Life (years)	1 - 2

Communications & Management

Parameter	Value
Interface Port(s)	36 Pin Battery Mgmt, USB
Control panel	LED Status display with on line : on battery
Audible Alarm	Alarm when on battery : distinctive low battery alarm

Surge Protection and Filtering

Parameter	Value
Surge energy rating	273 Joules
Data Line Protection	RJ45 10/100/1000 Base-T Ethernet protection

Physical Specifications

Parameter	Value
Maximum Height	190MM, 19.0CM
Maximum Width	140MM, 14.0CM
Maximum Depth	390MM, 39.0CM
Net Weight	12.3KG
Shipping weight	13.3KG
Shipping Height	297MM, 29.7CM
Shipping Width	235MM, 23.5CM
Shipping Depth	495MM, 49.5CM
Color	Black
SCC Codes	10731304410888

Environmental Specifications

Parameter	Value
Operating Temperature	0 - 40 °C
Operating Relative Humidity	0 - 95 (Non-condensing) %
Operating Elevation	0 - 914.4 meters
Storage Temperature	-15 - 40 °C
Storage Elevation	0 - 914.4 meters
Audible noise at 1 meter from surface of unit	40.0 dBA
Protection Class	IP20

Conformance

Parameter	Value
Approvals	CB, CE, EN/IEC 62040-1, EN/IEC 62040-2
Equipment protection policy	Lifetime : 50000 euros
Standard warranty	2 years repair or replace