Schneider Electric TeSys T Motor Controller

Product Data Sheet

Product Overview

A compact, modular motor controller unit with a dark grey casing and prominent Schneider Electric branding. It features multiple ports and connectors on the front panel, indicating its connectivity and control capabilities.

Model: LTMR27EFM

The Schneider Electric TeSys T is a comprehensive motor management system designed for equipment monitoring and control. It offers advanced features including Ethernet/IP and Modbus/TCP communication, 6 inputs, and 3 outputs, with a current range of 1.35 to 27A and a supply voltage of 100 to 240 VAC.

Specifications

Main

RangeTeSys
Product nameTeSys T
Device short nameLTMR
Product or Component TypeMotor controller
Device ApplicationEquipment monitoring and control
Measurement current1.35...27 A
[Us] rated supply voltage100...240 V AC 50/60 Hz
Current Consumption8...62.8 mA
Supply voltage limits93.5...264 V AC
Communication Port ProtocolModbus TCP/EtherNet/IP
Bus typeEthernet IEEE 802.3 0...159 10...100 Mbit/s, RJ45 2 shielded twisted pairs

Complementary

[Ui] rated insulation voltage690 V EN/IEC 60947-1
690 V CSA C22.2 No 14
690 V UL 508
[Uimp] rated impulse withstand voltage4 kV supply, inputs and outputs EN/IEC 60947-4-1
6 kV current or voltage measurement circuit EN/IEC 60947-4-1
0.8 kV communication circuit EN/IEC 60947-4-1
Short-circuit withstand100 kA conforming to EN/IEC 60947-4-1
Associated fuse rating4 A gG output
0.5 A gG control circuit
Protection Type
  • Phase unbalance
  • Earth-leakage protection
  • Thermal protection
  • Reverse polarity protection
  • Power factor variation
  • Overload
  • Load fluctuation
  • Locked rotor
  • Thermal overload protection
  • Phase failure
  • Overload (long time)

Network and Machine Diagnosis

TypeEvent recording, Trip context information, Phase fault and earth fault trip counters, Trip history information, Waiting time after overload tripping, Fault recording, Remaining operating time before overload tripping, Starting current and time, Motor control command recording, Running hours counter/operating time
Logic input number6
Input current3.1 mA 100 V, 7.5 mA 240 V
Current state 0 guaranteedLogic input 0...40 V <= 15 mA 25 ms
Current state 1 guaranteedLogic input 79...264 V >= 2 mA 25 ms
maximum output switching frequency2 Hz
Load current5 A 250 V AC logic output
5 A 30 V DC logic output
Permissible power480 VA AC-15), Ie = 2 A, 500000 cycles output)
30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Maximum operating rate1800 cyc/h
Contacts type and composition1 NO + 1 NC fault signal
3 NO
Metering typeAverage current Iavg
Phase current I1, I2, I3 RMS
Imbalance current
Earth-fault current
Temperature
Measurement accuracy5...15% earth fault current internal measurement
1% voltage 100...830 V)
3% power factor
5% earth fault current external measurement
+/- 30 min/year internal clock
0.02 °C Temperature
1% current
5% active and reactive power
Overvoltage categoryIII
Connections - terminals
  • Pitch: 0.20 in (5.08 mm)
  • Control circuit connector 1 0.0004...0.004 in² (0.25...2.5 mm²) AWG 24...AWG 14)flexible with cable end
  • Control circuit connector 1 0.0003...0.004 in² (0.2...2.5 mm²) AWG 24...AWG 14)flexible without cable end
  • Control circuit connector 1 0.0004...0.004 in² (0.25...2.5 mm²) AWG 24...AWG 14)flexible without cable end
  • Control circuit connector 1 0.0003...0.004 in² (0.2...2.5 mm²) AWG 24...AWG 14)solid without cable end
  • Control circuit connector 2 0.0003...0.002 in² (0.2...1 mm²) AWG 24...AWG 14)flexible with cable end
  • Control circuit connector 2 0.0003...0.002 in² (0.2...1.5 mm²) AWG 24...AWG 14)flexible without cable end
  • Control circuit connector 2 0.0008...0.002 in² (0.5...1.5 mm²) AWG 24...AWG 14)flexible without cable end
  • Control circuit connector 2 0.0003...0.002 in² (0.2...1 mm²) AWG 24...AWG 14)solid without cable end
Tightening torqueControl circuit: 4.4...5.3 lbf.in (0.5...0.6 N.m) flat screwdriver 0.1 in (3 mm)
Pollution degree2

Electromagnetic Compatibility

EMC ComplianceElectrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2
Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3
Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4
Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4
Voltage dips and interruptions immunity test, 70%, 500 ms, conforming to EN/IEC 61000-4-11
Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6
Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5
Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5
Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5
Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5
Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5
Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5
Control circuit: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5

Dimensions and Weight

Width3.6 in (91 mm)
Height2.4 in (61 mm)
Depth4.8 in (122.5 mm)
Net Weight1.17 lb(US) (0.53 kg)

Environment

Standards

Product Certifications

Protective Treatment

Fire Resistance

Ambient Air Temperature

Operating Altitude

Mechanical Robustness

IP Degree of Protection

Ordering and Shipping Details

CategoryUS1011222338
Discount Schedule0112
GTIN3389119404891
ReturnabilityYes
Country of originCN

Packing Units

Package 1

Unit TypePCE
Number of Units1
Package Height2.83 in (7.2 cm)
Package Width3.94 in (10.0 cm)
Package Length5.31 in (13.5 cm)
Package Weight18.7 oz (530.0 g)

Package 2

Unit TypeS02
Number of Units10
Package Height5.91 in (15.0 cm)
Package Width11.81 in (30.0 cm)
Package Length15.75 in (40.0 cm)
Package Weight12.379 lb(US) (5.615 kg)

Contractual Warranty

Warranty18 months

Environmental Data

Schneider Electric is committed to achieving Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via its "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.

Materials and Substances

Use Again

PDF preview unavailable. Download the PDF instead.

Generatepdf.aspx?salesorgid=78&dist=849&lang=42&form=no&documenttype=plain&productid=LTMR27EFM cairo 1.15.12 (http://cairographics.org)

Related Documents

Preview Modicon M580 Hardware Reference Manual - Schneider Electric
Schneider Electric's Modicon M580 Hardware Reference Manual provides in-depth technical details, installation, configuration, and diagnostic information for the Modicon M580 Programmable Automation Controller (PAC) series, crucial for industrial automation.
Preview LXM32M Ethernet TCP/IP Module Modbus TCP Fieldbus Manual
Explore the Schneider Electric LXM32M Ethernet TCP/IP Module with this fieldbus manual. Learn about Modbus TCP communication, configuration, operation, and troubleshooting for industrial automation.
Preview Schneider Electric TeSys Catalog 2024: Motor Control Solutions
Explore the Schneider Electric TeSys Catalog 2024, featuring innovative and connected solutions for motor starters, control, protection, and power management. Discover a century of expertise in motor control technology.
Preview Schneider Electric Digest 176: Energy Management & Electrical Solutions
Explore Schneider Electric's Digest 176, a comprehensive catalog showcasing solutions for energy management, electrical distribution, automation, and more. Discover how Schneider Electric drives energy efficiency and sustainability across industrial, commercial, and residential sectors with innovative products and services.
Preview Schneider Electric TeSys T Operator Control Unit LTMCUF - Product Data Sheet
Product data sheet for the Schneider Electric TeSys T Operator Control Unit, model LTMCUF. Includes specifications, environmental data, ordering information, and assembly dimensions.
Preview PacDrive Logic Motion Controller LMC Pro/Pro2 Hardware Guide
Comprehensive hardware guide for Schneider Electric's PacDrive Logic Motion Controller (LMC Pro/Pro2), detailing installation, system overview, technical data, safety, and maintenance for industrial automation applications.
Preview Schneider Electric Digest 176: Global Specialist in Energy Management Solutions
Explore Schneider Electric's Digest 176, a comprehensive guide to energy management and electrical distribution solutions. Discover products and services for buildings, industrial plants, data centers, and smart grids, focusing on efficiency, reliability, and sustainability.
Preview Schneider Electric TeSys K Contactor LC1K0601E7 - 6A, 48VAC Coil
Technical data sheet for the Schneider Electric TeSys K Contactor LC1K0601E7. Features include 3 poles, 1 NC auxiliary contact, AC-3 utilization category up to 440V, and 48VAC coil. Details on specifications, dimensions, environment, ordering, and packing units.