User Manual for PSA models including: CEN27WSK, PSA86727, 84202, CEN27WSK Centrii 7 Inch Smart Video Intercom System, CEN27WSK, Centrii 7 Inch Smart Video Intercom System, Smart Video Intercom System, Video Intercom System, Intercom System
[Ring Select]: In Standard mode, there are ten inbuilt ringtones to choose from. ... (Only for models with. SD card, user needs to put MP 3 music files in the.
Video Door Bell & Access Control Resource Page – PSA Centrii
File Info : application/pdf, 19 Pages, 7.35MB
DocumentDocument In Standby mode, tap the screen to display the Main Menu. This Menu includes the following icons: Settings, Monitoring, Media, Lock and Event. To return to Standby Mode, tap the Standby icon, or tap the Back Arrow icon (on bottom right of screen).
2.1 Transfer The five numbered icons denote other extension Monitors (by their Device ID's, if installed), excluding this Monitor. Tap to select a Monitor to connect to. The "ALL" icon will call all available monitors. Users can answer this call at any connected Monitor.
2.2 Setting
2.2.1 System Setting
2.2.2 Door Setting
The parameters of Door Stations 1 & 2 can be changed from this menu. Tap the "Door 2" icon to see the parameters for Door Station #2 (if installed).
[Device ID]: Monitor ID (Range from 1 to 6). ID=1 for Master Monitor; and 2 to 6 for Slave Monitors. Each intercom system supports a maximum of six Monitors.
[Time]: Time in 24-hour format. Tap right arrow to set Date & Time. [Date format]: YY/MM/DD, MM/DD/YY or DD/MM/YY formats. [Clock]: Indicates whether the clock is turned on during standby. If it is off, it will be
black when it returns to standby from the main menu interface. [Language]: include multiple languages.
[Keytone switch]: Indicates whether there is a button sound when operating the indoor monitor.
[MD preview switch]: Indicates whether the detected image is displayed on the indoor unit when the motion detection triggers. If the preview is turned on, the detected image will displayed on the indoor unit; the preview is off, the detected image will not displayed, but the background recording is still performed.
[Ringback]: indicates that the ringing sound of the outdoor unit can be turned on or off.
[Indoor unlock delay]: Indicates the unlocking time of the indoor unit. The range is 1s-10s, and the default is 5s.
[Status switch]: Shows the status of Door 1 & Door 2. Door 2 (if installed) defaults to "Off", which means it is disabled). If required, turn it "On" to enable the rear "Door 2" port. The status of Door 1 cannot be adjusted, and is always On.
[Unlock delay]: Indicates the unlocking time of the outdoor station. The range is 1s-10s, and the default is 5s.
[Record mode]: There are two recording modes, Video and Snapshot. Video means that when a visitor presses the call button of the outdoor station, the indoor monitor with the SD card automatically starts recording until the end of the call or the user presses the hang up button to manually stop. Snapshot means that when a visitor presses the call button of the door machine, the indoor monitor with the SD card automatically captures the photo of outdoor station camera, and the user can also manually press the setting button to continuously capture.
[Motion detection]: Indicate whether to detect and record when an object moves in front of the device.
[Motion Detection Sensitivity]: Indicates the sensitivity of motion detection. Including low, medium and high, low: indicates that the motion detection is difficult to trigger; medium: indicates that the motion detection is easier to trigger; and high: indicates that the motion detection is easy to trigger.
[Motion Detection Duration]: The recording time of motion detection can be set to 10s~300s, and the default is 20s.
[Message]: If "ON", a caller will be prompted to record a message when a call from that door station is not answered.
[Message time]: Indicates how long the visitor can leave a message after entering the message state. Can be set to 30s, 60s, 120s, the default is 30s.
[Signal mode]: It is divided into three modes: Auto, PAL and NTSC. When set to Auto, the indoor monitor will automatically detects the standard of the outdoor station.
[Signal type]: There are seven signal types: CVBS, AHD720, AHD1080, TVI720, TVI1080, CVI720, and CVI1080. If the signal system is set to PAL or NTSC, these seven types can be selected and used together. If the signal system is set to Auto, the signal type is not selectable and is fixed to the Auto signal type.
[Ring setting]: Tap the right arrow to show detailed Ring settings for this selected Door Station. Different settings can be set for up to three different daily periods.
Default Time Periods for Ringtones 1, 2 and 3 are 6am-12pm, 12pm - 6pm and 6pm - 6am respectively. The time periods are shown in 24-hour time format, and are adjustable. [Ring Time]: Sets the duration of ringing, when the outdoor Door Station calls
the indoor Monitor. Range of 5 to 45 seconds. Default time is 30 seconds. [Ring Mode]: Tap the arrow to select either "Standard" or "Customized" ringtones.
The ten Standard ringtones are inbuilt. Any Customized ringtones must be placed in the "Ring" folder of an inserted microSD card (not included). Tip: Format the microSD card in the Admin menu to automatically create the Ring folder. [Ring Select]: In Standard mode, there are ten inbuilt ringtones to choose from. In Customized mode, select from any preloaded customised ringtones in the Ring folder of your microSD card (not included). [Ring Volume]: This single setting adjusts both the Ringing Volume and Button
Volume. Range: 0 to 10 (0= Off, 10= Loudest. ). Default volume is 7.
2.2.3 Scene Setting
[Digital photo frame switch]: Indicate whether to open the digital photo frame. After the digital photo frame is turned on, the indoor unit will play the picture in the SD card after returning to the standby mode (only for models with SD card, user need to put the picture file in the "DigitalFrame" folder in the SD card).
[Digital photo frame time]: Indicates the time when the indoor unit is in the digital photo frame state, how long a picture is played.
[Background music switch]: Indicates whether background music is on in standby mode. The background music can be played when the background music switch is turned on and the indoor unit needs to insert an SD card. (Only for models with SD card, user needs to put MP 3 music files in the "BgMusic", folder in the SD card).
[Background music volume]: Indicates the volume of the background music, the volume range is 1-10.
2.2.4 Admin
[Format SD]: Tap to format microSD card (not included). Tap "OK" to confirm. If a microSD card is not inserted, the Monitor will prompt you with "No SD Card". Warning: All existing content in your microSD card will be deleted.
[Factory Reset]: Tap "OK" to return the Monitor to factory default settings. [Software update]: If there is "update.ius" in SD card, click "ok", monitor will update, if
update successfully, "success" will display on monitor and the monitor will restart, if monitor fails to update, failure will display on monitor. When there is no update software in SD card or there is no SD card in monitor, click "OK", it will prompt no update software. [Restart system]: Tap "OK" to restart indoor monitor.
14.2.2.5 Information
[Hardware version]: Display current hardware version. [Firmware version]: Display current MCU version. [Software version]: Display current software version. [Release date]: Display the date the current software released. [SD size]: Shows the free space and total space of current SD card.
2.3 Media
Media interface includes movie, music, photo, files.
2.3.1 Movie
In the Media menu, tap the Movie icon to display a list of available movie files. While a movie is playing, it can be manually scrolled forward or backwards by dragging the progress bar. The volume range is 0 to 10. The default volume is 07.
Movie
0/0
Movie
(1). Save the video in the root of SD card.
(2). Playback will stop if there is an incoming call from a Door Station, or if an alarm had been triggered. The Monitor will then display the image from that Door Station or Camera.
(3). Movies are played in an endless loop. If there is only one movie file, the same file will be played repeatedly.
2.3.2 Music In the Media menu, tap the Music icon to see a list of the music files. Tap on an item to start its music playback. This menu includes icons to select Last or Next Track, Pause, and to increase / decrease the playing volume.
xiaoxingyun_ring.mp3
00:00
00:59
- 3+
(1). During music playback, tap along the progress bar to skip forward or backwards within the music file. (2). Tap the Add or Subtract buttons to adjust the volume. The volume ranges from 0 to 10. The default volume is 07.
(3). To be listed by the Monitor, the MP3 music files must be preloaded into the "BgMusic" folder in the microSDCard (not included).
(4). Playback will stop if there is an incoming call from a Door Station, or if an alarm had been triggered. The Monitor will then display the image from that Door Station or Camera.
2.3.3 Photo
In the Media menu, tap the Photo icon to display a list of photo files.
(1). The next photo will be automatically displayed, unless the Pause icon is tapped.
(2). Place your photo files to be displayed into the "DigitalFrame" folder on the microSD Card.
2.3.4 Files In the Media menu, tap the Files icon to view the folders in your inserted microSD card. By formatting your microSD card through the Admin menu, the following folders are automatically created: DigitalFrame, BgMusic, Ring and DOORBELL folders. The DOORBELL folder, which stores the call and message recordings/snapshots, is only visible when the microSD card is inserted into a computer.
["DigitalFrame" folder]: Save the picture of the digital photo frame ["BgMusic" folder]: Store background music files for indoor units. ["Ring" folder]: Store user defined ringtone files for indoor units. ["MessageImport" folder]: The message customization function allows the user to
set the user defined leave message alert tone. 1. Store the recorded voice file in this folder. 2. In the file manager, find and click the file, and then automatically import it to
flash to replace the default message alert tone. Note: The voice file request is in mp3 format, and the file size is up to 2M. ["ALARM" folder]: Store the records after the indoor unit triggers the alarm. ["MANUAL" folder]: Store the call history of the indoor unit and the outdoor station. ["MD" folder]: Store the motion detection record of outdoor station. ["VISITOR" folder]: Store the message record of the indoor unit. All the recorded content in the above four folders can be reviewed through the Event menu.
2.3.5 Event This menu allows various captured event content to be reviewed; including Call records and Messages. Each displayed record is timestamped and shows if it had been read.
Call record: Shows snapshots or recorded videos of calls from the Door Stations; both automatically or manually captured content. Message record: Message Record: When the Message Switch is turned On, and if a call is not answered, video content will be recorded from the beginning of the call. Motion detection: Motion Detection: Shows snapshots or recorded videos, when motion detection is triggered by a nominated Door Station or Camera; both automatically or manually captured content. Alarm information: Shows snapshots or recorded videos, when a Camera triggers an alarm; both automatically or manually captured content. Note: Press and hold a highlighted record for a popup menu to Open or Delete the item.
2.4 Home, Away & Silent Modes 1). Home mode: Normal operation. 2). Away mode: Door station calls are immediately prompted to leave a message. 3). Silent mode: Normal operation, but the Monitor will not ring, and the prompt
message is silenced. 2.5 Unlock/lock Tap this icon to operate the Lock relay (connected to the Lock Output socket at rear of Monitor). It can be used to control an electric door strike (not included) or gate controls. 2.6 Standby Return to standby page. 2.7 Image Parameter Settings While video from a Door Station is displayed, tap the Image Settings icon (gear-shaped) to see the image parameters. Adjustable parameters include Call Volume, Brightness, Contrast and Saturation. Tap the Add or Subtract icons on both ends of each parameter bar to adjust its value.
[Intercom volume]: The value can be set from 0 to 10, the default is 07 [Brightness]: The value can be set from 0 to 50, default value is 25. [Contrast]: The value can be set from 0 to 50, the default is 25. [Saturation]: The value can be set from 0 to 50, the default is 25.
Register Log in with Existing Account
Corel PDF Engine Version 19.1.0.419