6. FIRST USE RINSING
Step 1
Fill the water tank with fresh drinking water. Insert it back into the machine. Remove the drip tray.
Step 2
Open the locking handle. Put the rinsing tool into the capsule holder. Insert the capsule holder into the machine. Place a large empty container underneath the coffee outlet.
Step 3
Close the locking handle.
Step 4
Use the control ring and select level 7 on the volume display (highest bar).
Step 5
Press the start/stop button. Machine starts rinsing.
Step 6
The temperature selection button and the volume display light blink for up to 8 seconds.
Step 7
Press the start/stop button. Machine starts rinsing. Wait until the machine stops automatically. The temperature selection button and the volume display light blink for up to 8 seconds.
Step 8
Open the locking handle. Pull out the capsule holder. Remove the rinsing tool. Reinsert the capsule holder.
Step 9
Empty the container. Fill the water tank with fresh drinking water. Insert the water tank into the machine. Reinsert the drip tray. The machine is ready to be used.