User Manual for innosystemtech models including: 629, MZ-629 Riding Speaker With Bracket, MZ-629, Riding Speaker With Bracket, Speaker With Bracket, Bracket, Speaker
14 Feb 2025 — Turn on the Bluetooth function on your phone or other. Bluetooth device, and then search for a speaker named ... The speaker initiating TWS pairing is the main ...
File Info : application/pdf, 2 Pages, 18.95MB
DocumentDocument MZ-629
10
X1 X1
X1 X1
4-6hr 95dB 10m 200Hz-20KHz V5.4
500mAh 1-2hr DC 3.7V 5W IP67
4 32 1
56 7
1 3/ 10
2 /
3 // // TWS /
4 /
5 /(/)
6 TF
7 DC 5V
1 " "3
2 MZ-629
3
4
5 // " "3 10
10M
1 AB
B A
2
3 2
4
5
/ " " / " "
TF
TF TF " "
TF
TWS
TWS // " " TWS TWS
/ / " "TWS
Riding Speaker With Bracket
User's Manual MZ-629
Safety Instructions
Read all instructions and save them for future reference.
Do not place it near a heat source. Avoid using radiators, stoves, and other equipment that can generate heat. Avoid long-term exposure to sunlight and high temperatures.
Please note that when Bluetooth is disconnected for 10 minutes, the speaker will enter sleep mode and shut down.To restart the speaker, press the power switch button.
Packaging Content
Speaker x1 Bracket x1
Charging cable x1 User manual x1
Product Parameters
Working hours: 4-6hours SNR: 95dB Wireless distance: 10m Frequency: 200Hz-20KHz Bluetooth version: V5.4
Battery capacity: 500mAh Charging time: 1-2hours Working voltage: DC 3.7V Rated power: 5W Waterproof grade: IP67
Product Description
4 32 1
56 7
1 Power Switch: Press and hold for 3 seconds to turn on/off the device. Press and hold for 10 seconds to reset. After resetting, the device will automatically turn on.
2 Volume up key: Single press for the next song. Long press for volume up.
3 Play/Pause/Pair: Short press: Play music/Pause music/Answering a phone call. Double press: Enter TWS mode. Long press: Force disconnect the current Bluetooth connection/Reject a call.
4 Volume down key: Single press for the previous song. Long press for volume down.
5 Work/Charging indicator light (blue/red light)
6 TF card interface 7 Power interface: DC 5V
Operation Instructions
Step 1
Press and hold the power button " to activate Bluetooth mode. The blue light will flash, indicating the speaker is ready to pair with your mobile device.
" for 3 seconds
Step 2 Turn on the Bluetooth function on your phone or other Bluetooth device, and then search for a speaker named MZ-629. Connect to the speaker.
Step 3 After successful pairing, there will be a prompt sound and the blue indicator light will remain on.
Step 4
Play music on the phone. When playing music, tthe blue indicator light will flash
Step 5
Indicator Light
To connect the speaker to a new device: When connecting the speaker to a device, you can press and hold the Play/Pause/Pairing button " " for 3 seconds to disconnect the current connection and enter pairing mode. The blue indicator light will flash slowly. The speaker can then be connected to a new device. In Bluetooth mode, it will automatically reconnect to the last connected device upon power-on and will turn off after 10 minutes of no connection.
Distance10M
Support Bracket Installation Guide
Step 1 Push frame A firmly against frame B to secure them together.
B
A
Step 2 Unscrew the screws from the bracket.
Step 3 Place the anti-slip pad into the ring of the bracket. Secure the bracket to the bicycle by passing it through the ring. Then use the screws taken out in Step 2 to tighten the bracket.
Anti-slip pad
Step 4 After installing the bracket, you can push the speaker into the bracket. Once you hear a click sound, the speaker is properly installed.
Step 5 If you need to remove the speaker, simply press the raised part of the bracket to release and remove it.
Raised part
Connection Memory Function
If the device's Bluetooth feature is enabled, the speaker will automatically connect to the last paired device upon powering on.
Charging Tips
When the battery is low, the speaker will sound a warning sound and need to be charged. The red indicator light remains on during charging, but goes off when fully charged. It is recommended to charge products with lithium batteries every three months when not in use.
Call Function
Answering Calls: When the speaker is connected to your phone, if there is an incoming call, you can simply press the play/pause button " " to answer the call. Rejecting Calls: When the speaker is connected to your phone, if there is an incoming call, you can reject the call by long-pressing the play/pause button " " .
TF Card Mode
After inserting the TF card, the speaker will enter TF card mode. You can switch modes by briefly pressing the power button " " . In TF card mode, the blue indicator light will flash when playing music.
TWS Pairing
Two TWS speakers that have not been paired before are powered on separately, and the blue indicator lights are flashing. Double click the play/pause/pair button " " on any speaker to enter TWS pairing mode. After successful pairing, the blue indicator light of the main speaker remains on when connected to the phone, flashes when disconnected, and the blue indicator light of the secondary speaker remains on. The speaker initiating TWS pairing is the main speaker. Note: For the two successfully paired speakers, you can disconnect the TWS connection by double-clicking the play/pause/pairing button " " on the primary speaker.
Warranty Card
Model Distributor TEL ADD
Date of purchase Name E-mail
Warranty Records
Name Fault description Repair date Maintainer
CERTIFICATE
DATE QC