KOSPET MAGIC P10 User Manual

BT Calling Setup

(Compatible with both iPhones and Android phones)

Once the watch is connected to the App, tap 'Pair' in the App to enable BT calling.

Image Description: The image shows a two-part illustration. The top left shows a smartphone screen with a "Bluetooth Pairing Request" notification from "KOSPET P10" asking to pair with an iPhone. The bottom left shows a smartphone screen displaying "Firmware Update" with a new version detected. The right side shows a smartwatch interface. The top right displays the time "04/06" and various app icons including a phone, moon, bell, battery percentage, sun, watch, vibration symbol, flashlight, and a plus sign. The bottom right shows the smartwatch displaying "20% Updating..." with a rocket icon.

OTA Update

Open the App and go to My > My Device > Firmware Update to download the latest firmware version.

Technical Specifications

Warranty Policy

KOSPET provides a two-year warranty for products purchased from the official online store (http://www.kospet.com). For more details, please visit: https://kospet.com/pages/warranty-policy

For further questions, contact support@kospet.com or call +1 (507) 668-8466 (Monday to Friday, 9:00 AM – 6:00 PM EST). For Amazon purchases, contact smartwatch.amz@gmail.com.

Safety Precautions

• Do not expose the watch to high temperatures or near heat sources (heaters, ovens, microwaves, water heaters) as excessive heat may cause battery explosion and other safety hazards.
• This product uses a non-removable polymer battery. Disassembly by unauthorized personnel is strictly prohibited to prevent potential risks.
• While the watch passed waterproof testing, wear and tear during daily use may affect its sealing performance. Use the watch carefully while swimming or diving, and avoid wearing it in saunas or during hot showers.
• This product is not a professional medical device and cannot be used for medical purposes or as a basis for diagnosis. All detection results are provided for reference purposes only.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Important Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Manufacturer

Shenzhen Amazwear Technology CO., LTD.

Address: 34/F, Changjiang Center, Intersection of Renmin Road and Jianshe Road, Jingxin Community, Longhua Subdistrict, Longhua District, Shenzhen, Guangdong, China.

Made in China

E-label Information

To access the e-label information, in the device:

1. Go to the main interface.
2. Enter the setting interface.
3. Select 'About'.

Image Description: The image shows a smartwatch interface with the date "04/06" and several icons: a phone, moon, bell, battery percentage, sun, watch, vibration symbol, flashlight, and a plus sign. Another image shows a list of settings including "Change watch", "Select language", "Always-on", "Display &", "Sound &", "Themes", "Password", "Time & Date", "Do not disturb", "Sport", "Bottom key", "Cover lock", "QR code", "System menu", and "About". The final image shows the "About" screen with "Device name: KOSPET MAGIC P10", "Model: P10", "Version: P10_SW_V1.0.16", "Mac address: 78:02:B7:32:43:53", and "FCC ID: 2BEH2-MAGICP10", followed by a barcode and "M00125F005701".