KOSPET ORB

Packing List

The package includes the following items:

• Smartwatch (including silicone strap)
• Magnetic charging cable
• User manual

Smartwatch: A circular device with a display showing the time and a rotating crown on the side.

Magnetic charging cable: A cable with a USB connector on one end and a magnetic connector with two pins designed to attach to the back of the watch.

Strap: A silicone strap with holes for adjustment and a buckle.

User manual: A booklet titled "KOSPET ORB User Manual".

About the Watch

Watch Components:

• Front View: Features a display showing the time (e.g., "10:08") and a "Rotating crown" on the side.
• Back View: Equipped with a "Heart rate sensor" [heart-icon] and a "Charging port" [charging-icon].

Watch Charging

• Please fully charge the watch before first use.
• Connect the magnetic charging cable's USB connector to a power adapter or a computer's USB port.
• The magnetic connector on the charging cable automatically attaches to the back of the watch. Ensure the metal contacts on the watch back are closely connected to the charger's magnetic connector.
• Use the original KOSPET magnetic charging cable. Before charging, ensure both the charging cable and the watch are dry and clean.
• Use a power adapter with an output current of 500mA or higher, certified to meet safety standards.

Charging Illustration: A watch connected to the charging cable, displaying a battery icon indicating "75%" charge and the time "12:00".

Watch Wear and Care Tips

Cleaning and Maintenance After Water Activities

After water activities (e.g., swimming, surfing), promptly shake the watch to remove residual water from holes in the watch case. Wipe the watch body and the strap with a soft cloth dampened with clean water. Allow them to dry completely before wearing the watch again to prevent salt deposits that may affect the normal use of the watch.

Cleaning Tips After Workouts

After intense activities (e.g., running, hiking, cycling), sweat and acidic residues may accumulate on the watch. Rinse the watch with clean water and dry it promptly to minimize long-term corrosion.

Cleaning Precautions

Do not use soap, hand sanitizer, shampoo, or other harsh chemicals to clean the watch, to avoid skin irritation or component damage caused by residues. Device defects or damage caused by improper cleaning or chemical exposure are not covered under warranty.

Usage Environment Precautions

Do not expose the watch to the following conditions to maintain its water resistance:

• High-temperature environments (e.g., saunas, hot showers)
• High-pressure water (e.g., diving, water skiing)
• Strong corrosive liquids or UV/radiation exposure

Note: Prolonged exposure to extreme conditions accelerates gasket deterioration, which may lead to water ingress.

App Download and Installation

Before using the smartwatch, download the Apexmove App to access more health and fitness data insights and customize various settings, helping you embrace a healthier and more active lifestyle.

Method 1: Scan QR Code

Scan the QR code to download and install the App.

Method 2: Search App Stores

Enter the keyword "Apexmove" in the Apple App Store [app-store-icon] or Google Play Store [google-play-icon] to download and install the App.

App Interface Examples: Screenshots show the Apexmove app available on app stores and the installation process.

App Registration and Login

1. Once installation is complete, open the App. Allow it access to Bluetooth [bluetooth-icon] and location, and grant other necessary permissions on the smartwatch.
2. To fully experience all features, register and log into the App before use.

Permission Example: A screenshot shows a prompt asking for Bluetooth permission for the "Apexmove" app.

Pairing and Connection

Method 1: QR Code Pairing

1. Press and hold the crown for 3 seconds to power on the watch and switch to the QR code interface.
2. Open the Apexmove App and go to My > My Device.
3. Select the scanning icon [scan-icon] to pair the watch.

Pairing Process: Illustrations show the watch displaying a QR code with text "Scan to download App or pair a device", the phone's app interface for scanning, and the watch displaying a "Pair?" prompt with "Cancel" [cross-icon] and "Pair" [checkmark-icon] options.

Method 2: Add Device Pairing

1. Press and hold the crown for 3 seconds to power on the watch.
2. Open the Apexmove App and go to My > My Device.
3. Select the "Add Device" icon, find "KOSPET ORB" from nearby devices, and tap to pair the device.

Pairing Process: Illustrations show the phone's app interface displaying a list of nearby devices including "KOSPET ORB", and the watch displaying a "Pair?" prompt with "Cancel" [cross-icon] and "Pair" [checkmark-icon] options.

Gesture Operations

• Swipe Down: Swipe down on the home screen to access the Shortcut Menu. Tap the [plus-icon] to customize it. (Watch screen shows time, battery, and icons, with a "+" icon).
• Swipe Up: Swipe up on the home screen to access the Notification Center. Tap the [edit-icon] to customize it. (Watch screen shows a notification list with sender, message, and a "Clear all" button).
• Swipe Right: Swipe right on the home screen to view unread notifications. (Watch screen shows a detailed notification).
• Swipe Left: Swipe left on the home screen to enter the App List. (Watch screen shows a list of apps: "Call", "Daily activity", "Workout").

Button Operations

1. Rotate the Crown:

• On the App List and other pages: scroll up/down through options.
• On the watch face editing page: switch between watch faces.
• During music playback/BT calls: adjust the volume.

2. Press the Crown Once:

• Wake the watch screen when the screen is off.
• On the home screen: enter the App List.
• On other pages (except pop-up windows): return to the home screen.
• During a workout: pause/start the workout.
• In Stopwatch/Timers: pause/resume.

3. Press and Hold the Crown:

• For 3 seconds when the watch is powered off: power it on.
• For 3 seconds when the watch is powered on: access the Power off/Restart page.
• For over 8 seconds when the watch is powered on: force a restart.
• For 5 seconds in power saving mode: exit the mode.
• During a workout: end the workout and save workout details.

Illustration: A diagram of the watch highlighting the crown, with lines indicating its various functions.

BT Calling Setup & OTA Update

BT Calling Setup

(Compatible with both iPhones and Android phones)

Once the watch is connected to the App, tap 'Pair' in the App to enable BT calling.

Illustration: Phone screen shows a "Bluetooth Pairing Request" for "KOSPET ORB". Watch screen shows a BT calling icon [bluetooth-icon].

OTA Update

Open the App and go to My > My Device > Firmware Update to download the latest firmware version.

Illustration: Phone screen shows "Firmware Update" with "New version detected". Watch screen shows "Updating..." with a progress indicator [rocket-icon].

The E-label Information

Access E-label information through the following steps:

Step 1:

Click Settings [settings-icon] in the menu or click Settings in the shortcut menu interface.

Illustration: Watch screens showing menu options like "Find phone", "Women's health", "Training plan", "Settings", and a shortcut menu with "Settings".

Step 2:

Enter the setting interface.

Illustration: Watch screen showing setting options: "QR code" [qr-code-icon], "System menu" [menu-icon], and "About" [info-icon].

Step 3:

Select "About", as shown in the following interface.

Illustration: Watch screen showing "< About" header, "Device name KOSPET ORB", "Model ORB", and "Version ORB_SW_V1.0.02".

Technical Specifications

Warranty Policy

KOSPET provides a two-year warranty for products purchased from its official online store (http://www.kospet.com). For more details, please visit: https://kospet.com/pages/warranty-policy.

For any further questions, feel free to:

• Email: support@kospet.com
• Call: +1 (507) 668-8466 (Service hours: Monday to Friday, 09:00 am - 06:00 pm EST)

For purchases made on Amazon, please contact: smartwatch.amz@gmail.com

Safety Precautions

• Do not expose the watch to high temperatures or place it near heat sources, such as heaters, ovens, microwaves, or water heaters, as excessive heat may cause battery explosion and other safety hazards.
• This product uses a non-removable polymer battery. Disassembly by unauthorized personnel is strictly prohibited to prevent potential risks.
• While the watch passed waterproof testing before leaving the factory, wear and tear during daily use may affect its sealing performance. Please use the watch carefully while swimming or diving, and avoid wearing it in saunas or during hot showers.
• This product is not a professional medical device and cannot be used for medical purposes, or as a basis for diagnosis of any medical condition. All detection results are provided for reference purposes only.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

Important Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Manufacturer Information

Manufacturer: Shenzhen Amazwear Technology CO., Ltd.

Address: 34/F, Changjiang Center, Intersection of Renmin Road and Jianshe Road, Jingxin Community, Longhua Subdistrict, Longhua District, Shenzhen, Guangdong, China.

Origin: MADE IN CHINA

This user manual is published by KOSPET. The company reserves the right of final interpretation and may make adjustments to this manual anytime if necessary. Feature descriptions on the foregoing pages are provided for reference only.