Regiolux LOWEA 830/840 LED Luminaire

Product Overview

This luminaire contains a light source of energy efficiency class C.

Manufacturer details: Regiolux GmbH, Hellinger Str. 3, D-97486 Königsberg/Bay. Website: www.regiolux.de, Email: info@regiolux.de.

Technical specifications:

Operating Voltage: 220-240 V

Frequency: ~50/60 Hz

Impact Resistance: IK 05

Control Type: DALI, ETM

Safety Information

General Safety Information:

• Installation, commissioning, and maintenance must be performed only by a qualified electrician.
• Never perform any work on the luminaire with voltage applied. [Danger Symbol] Danger to life due to electric shock!
• Electrical connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
• Damaged luminaires must not be operated.
• Observe and retain safety instructions and mounting instructions.
• No liability is accepted for damages resulting from improper use.
• Use genuine parts only for repair.
• Ensure stability of the ceiling and fastening elements.
• The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless otherwise described by labeling the luminaire.

Operation of the Luminaire:

• Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace affected luminaires. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
• Exceeding the permissible ambient temperature will reduce the luminaire's lifecycle, resulting in premature failure in extreme cases.
• Avoid condensation of the luminaire.
• Any mechanical load to the LED circuit boards is not permitted.
• LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact [ESD].
• Depending on their concentration, chemicals can corrode the LED modules and lead to reduction of luminous flux, drift of luminous colour, and/or total failure. Always avoid direct contact with acids, bases, solvents, volatile organic compounds, and/or oils. Ensure sufficient ventilation to prevent damage by gas release.
• Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
• Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Changes to Products:

• Modification, reworking, or re-marking of products can have a negative impact on their technical properties, destroy them, and possibly cause consequential damage to other objects. The manufacturer cannot be held responsible for damage caused by such changes.
• [IP5x] - dust nonconductive
• [IP6x] - dust conductive and dust nonconductive

Safety instructions are available in multiple languages online.

Installation and Assembly

Assembly Steps:

1. [Assembly Step 1]: Diagram shows the luminaire casing being opened.
2. [Assembly Step 2]: Diagram shows the luminaire base with dimensions 520 and 348 marked, and a mounting point indicated with "[Fix]".
3. [Assembly Step 3]: Diagram illustrates internal wiring connections within the luminaire.
4. [Assembly Step 4]: Diagrams show the process of opening ("Demontage" - Disassembly) the luminaire by pushing a part, and assembly steps.

Service, Cleaning, and Disposal

Service:

• Replace aged or failed LEDs: [Switch off supply to luminaire], [Remove luminaire for disposal]. Note: The LED light source must not be replaced by the user.

Cleaning:

• [Switch off supply to luminaire].
• Clean outside luminaire.
• Remove optic.
• Clean inside luminaire.
• Refit optic.
• Make functional test.
• [SELV Only] applies to specific internal cleaning steps.

Disposal:

• [Switch off supply to luminaire].
• Remove luminaire for disposal.
• Dispatch materials to WEEE recycling plant [WEEE Disposal Symbol].
• Manufacturer registration number for WEEE: EAR-NR. 16667402. Interzero Manufacturer No.: 80019.