Product Details
Product Name: ALLEGRA TL Table Lamp
| Blk | Wht | Schr | Item No. |
|---|---|---|---|
| 22704 | 22705 | 22706 | ALLEGRA-TL |
Thank you for purchasing your new ALLEGRA Table Lamp. Please take the time to read and understand this instruction sheet.
Failure to do so may void warranty.
Specifications
Voltage: 240V
Power: 60W Max
Requires: 1xE27 Globe (Not Included)
Installation Steps
Step 1: Assemble the base and pole.
Diagram shows the lamp base, a vertical pole, and small hardware components (screws, washers) for initial assembly.
Step 2: Attach the lamp stem to the lampshade assembly.
Diagram illustrates connecting the lamp stem to the lower part of the lampshade structure, with screws indicated for securing.
Step 3: Install the light bulb.
Diagram shows the fully assembled table lamp with a hand inserting an E27 globe into the lamp socket.
Step 4: Final dimensions.
Technical drawing detailing the lamp's dimensions: 700mm total height, Ø380mm lampshade diameter, Ø19mm stem diameter, and Ø178mm base diameter.
Important Notes
- The lamp must be installed by a professional electrician.
- Ensure the power supply is switched off before fitting this product.
- Do not touch the lamp when in use.
- Keep away from hot steam and corrosive gas.
