Assembly Time
DRUMMERS: ? ? ? ? ?
EVERYONE ELSE: ? ? ? ?
(Note: Beer mug emojis represent estimated assembly time categories.)
Assembly Instructions
- Use the Small Allen Wrench (A9) to screw legs into the Seat (A4). Ensure brace holes face inward and knob holes face the same direction.
- Use the Small Allen Wrench (A9) to screw the Braces (A5) into the Seat (A4) and Legs (A2). Screw the Backrest Connection (B4) into the Seat (A3) as well.
- Attach the Crossbeam (A3) with the Big Allen Screws (A8) using the Big Allen Wrench (A9). Ensure it is tight and secure on both ends.
- Insert the Base (A1) into each Leg (A2). Align the holes for the knobs on the legs with the holes on the base on the same side.
- Screw the Adjustable Pull-knob (A6) into each leg to secure the Base (A1). The pull-knobs (A6) are spring-loaded, allowing height adjustment of the Base (A1) by pulling the knob.
- The rubber feet covering the end of the Base (A1) can be rotated to eliminate wobble on uneven surfaces.
- Assemble items B1, B2, and B3. Secure the Backrest (B1) with Allen Screws (A7), and the T-shape Telescoping Bar (B3) with the Adjustable Pull-knob (A6).
- Insert the Backrest components (B1, B2, and B3) into the Backrest Connection (B4) and secure with an Adjustable Pull-knob (A6).
Parts Included
| Part ID | Description | Quantity |
|---|---|---|
| A1 | BASE | x2 |
| A2 | LEG | x2 |
| A3 | CROSSBEAM | x1 |
| A4 | SEAT | x1 |
| A5 | BRACE | x2 |
| A6 | ADJUSTABLE PULL-KNOB | x4 |
| A7 | ALLEN SCREW WITH SPRING WASHER | x20 |
| A8 | ALLEN SCREW WITH WASHER | x2 |
| A9 | BIG & SMALL ALLEN WRENCH | x2 |
| B1 | BACKREST | x1 |
| B2 | VERTICAL TELESCOPING BAR | x1 |
| B3 | T-SHAPE TELESCOPING BAR | x1 |
| B4 | BACKREST CONNECTION | x1 |
Related Products
- X-Style Utility Table (MS1098)
- Keyboard Workstation (MS1111)
- Z-Style Keyboard Stand (MS1078)
Customer Feedback and Support
Have any questions or feedback? Liquid Stands engineered this seat for you, whether you are at home, in the studio, or gigging. If you have an idea to make this seat better, share it via email at: featurerequest@liquidstands.com.
Customer Feature Requests Used to Improve Our Seat: Waiting for your request!
FULL 10-YEAR WARRANTY against any damages or defects. Visit LiquidStands.com to register and get exclusive coupons!
CONTACT INFO:
Text or call us: 813-304-2224
