1. Installing the 360mm CPU Liquid Cooler Bracket
When installing a 360mm CPU liquid cooler, ensure the mounting bracket is positioned in-between the fans and the radiator. This configuration is demonstrated in the diagram below.
Diagram Description: An exploded view illustrating the installation of a 360mm CPU liquid cooler onto the top of the XPG BATTLECRUISER chassis. The diagram shows three fans positioned above a mounting bracket, with a radiator situated beneath the bracket. Arrows and text labels indicate the correct assembly order: fans above the bracket, the bracket facing upwards, and the radiator installed underneath the bracket.
- Make sure the fans are installed above the bracket. ?
- Make sure the bracket is facing upwards (by default). ⬆️
- The radiator is installed underneath the bracket. ⬇️
2. Adjusting the Modular Top Bracket
The top bracket of the XPG BATTLECRUISER chassis is modular and can be removed or repositioned.
To ensure clearance for a 360mm radiator and prevent interference with DRAM modules, unscrew the bracket and shift it towards the left side of the chassis (the side with the glass panel). Then, securely screw the bracket back onto the chassis in its new position.
Diagram Description: A detailed illustration of the PC chassis interior, focusing on the top mounting area. It shows a screw being detached from the modular top bracket, with dashed lines indicating that the bracket can be slid or shifted towards the left side of the chassis, adjacent to the glass panel.
3. DRAM Clearance Requirements
The recommended maximum height for DRAM modules is 45mm.
As illustrated in the diagram, the modular bracket needs to be shifted towards the glass panel side of the chassis. It should be installed between the fans and the radiator to guarantee sufficient clearance for the DRAM modules.
Diagram Description: A cross-sectional view demonstrating DRAM clearance within the PC chassis. The diagram indicates a maximum recommended DRAM height of 45mm. It visually represents how shifting the modular bracket towards the glass panel side creates necessary space for the radiator and ensures that installed DRAM modules do not interfere with the cooling system.
Measurement: 45mm ?
