FERM CDM1165 20V Cordless Impact Driver

About This Product

The FERM CDM1165 is a powerful 20V cordless impact driver designed for driving in and loosening screws and bolts. It features a variable speed trigger, a work light, and a 1/4" hex chuck for quick accessory changes.

Key Features & Specifications

• Model: CDM1165
• Voltage: 20V
• Tool Holder: 6.35 mm (1/4") internal hexagon
• No Load Speed: 0-2500 /min
• Impact Rate: 0-3500 /min
• Max Torque: 150 Nm
• Weight (without battery): 1.1 kg

For optimal performance and safety, use only FERM FX-POWER 20V battery platform compatible batteries (CDA1167, CDA1168) and chargers (CDA1169, CDA1170, CDA1172).

Safety First

Always read and understand the safety instructions provided in this manual before operating the tool. Key safety points include:

• Keep your work area clean and well-lit.
• Avoid operating in explosive atmospheres.
• Use appropriate personal protective equipment (eye protection, etc.).
• Ensure the tool is switched off before connecting to a power source or battery.
• Do not force the tool; use the correct tool for the application.
• Regularly maintain the tool and accessories.
• Follow all charging instructions for the battery pack.

For comprehensive safety guidelines, refer to the detailed sections within this manual.

Operation and Maintenance

This section details how to assemble the impact driver, insert and remove the battery, change accessories, and operate the tool, including adjusting the direction of rotation and using the work light. Regular cleaning and proper maintenance are crucial for the longevity and safety of the tool.

Warranty Information

FERM products are guaranteed against defects in materials and workmanship for the legally stipulated period from the date of original purchase. For warranty claims or service, please contact your FERM dealer. Note that the warranty excludes repairs by unauthorized service centers, normal wear and tear, misuse, or improper maintenance.