ELMO MX-P3 Visual Presenter Quick Start Guide
Model: MX-P3
Document ID: 6X1VLBE01_R1-Xxx
Package Contents
- ELMO MX-P3 Visual Presenter
- AC Adapter (for Japan/North America only)
- AC Adapter (for Europe only)
- AC Adapter (for Asia only)
- Warranty Card (for Japan/North America only)
- IMPORTANT SAFEGUARDS booklet
- Quick Start Guide (this book)
- Note (for Europe only)
- USB Cable
Visual depiction of the presenter unit and various included accessories like AC adapters for different regions, a warranty card, a guide booklet, and a USB cable.
Caution: Make sure to read the "IMPORTANT SAFEGUARDS" in this guide before using the product.
Preparation
Setting Up
1. Connect a display device such as a monitor.
Diagram illustrating the connection of the visual presenter's HDMI OUT or RGB OUT ports, using HDMI or RGB cables, to a monitor or projector.
2. Connect the AC adapter.
Diagram showing the AC adapter plugged into a wall outlet and connected to the presenter's DC IN 5V port. A red light indicator is shown on the presenter.
Close-up illustration of the AC adapter plug, showing a convex part that fits into a groove on the adapter body. Instructions indicate pushing until a 'click' is heard and sliding a lock button to remove the plug.
About AC adapter plug connection:
- Fit the convex part of the plug in the groove of the AC adapter and push it downward.
- Push until you hear "click".
- Choose the correct plug according to the outlet.
- When removing the plug from the AC adapter, slide the lock button to the direction of [arrow-right] and pull the plug upward.
Using the Product
-
Turn on the power.
Illustration of the presenter's power button being pressed, activating a blue light indicator.
Press [power-button].
-
The camera image appears.
A photograph showing the camera's view of a ruler and two small objects placed on a surface.
-
Place an object to be displayed under the camera.
Diagram illustrating the presenter positioned over an object on a flat surface, showing the arm articulation.
-
Adjust zoom and focus.
Zoom:
Enlarge: Press [enlarge-button].
Shrink: Press [shrink-button].
Auto focus (focus adjustment):
Press [auto-focus-button].
-
Turn off the power.
Illustration of the presenter's power button being pressed, changing the indicator light from blue to red.
Press [power-button].
UVC (USB Video Class)
Connect to a computer, etc.
-
Connect the USB cable.
Diagram showing a laptop connected to the ELMO MX-P3 presenter via a USB cable (USB Type-A to USB Type-C).
Blue light indicator is shown.
The power is disabled when power is supplied by USB bus power.
- Start the UVC application such as a personal computer.
The frame rate may be decreased depending on the computer used.
If the bus-powered power supply capacity is insufficient, the operation of this unit may become unstable. In that case, and when outputting USB and HDMI/RGB simultaneously, use the AC adapter to supply power.
Detailed Usage of the Product
For detailed information about the Instruction Manual, refer to the following websites:
ELMO EUROPE SAS
