Canyon Power Bank 20000 mAh PB-202
Quick Guide v 1.6
Introduction
Dear customer! Congratulations on your purchase of the TM Canyon device. It is recommended that the user reads this manual entirely in order to make full use of the product. For more information about Canyon products, please visit our web-site: http://canyon.eu
Specifications
- Capacity: 20000 mAh
- Input: DC 5V/2 A (Micro USB / Type-C)
- Output: 5V/ max 2.1A (2*USB)
- Smart IC technology
- Digital display function
1. Package Contents
The package includes:
- Power bank unit
- Micro-USB cable
- Owner's manual
2. Digital Display
The digital display will turn on by pressing lightly the power button. It indicates the charging process and battery level.
3. Charging Power Bank
To charge the power bank:
- Connect a compatible USB charger (sold separately) to a power outlet or computer.
- Connect the micro-USB or USB Type-C connector to the power bank's charger connector.
- When the battery is fully charged, first disconnect the charger from the power bank, and then remove it from the power outlet. Hold the plug, not the cord, when disconnecting the charger.
4. Charging USB Device
To charge your device:
- Connect your device to the power bank using the included cable or your device's cable.
- Press the ON/OFF button once.
- The digital display on the power bank indicates the charging process. As the external battery is discharged, fewer lights will be illuminated.
- When your device is fully charged, please remove the battery.
Note: Any power bank will not deliver full-declared capacity to your device – some of this energy is lost through heat generated and voltage conversion. Please, check the specification of your phone or tablet’s battery to estimate how many full charges you can expect. If not stated otherwise, expect to achieve around 70% of efficiency.
Safety Instructions
Read and follow all the instructions before using the product:
- Do not expose the power bank (PB) to excessive moisture, water, or dust. Do not install in locations with high moisture or dust.
- Protect the device from heat: do not install it near heaters and do not expose it to direct sunlight.
- The product must be connected to a power supply of the type specified in the owner’s manual only.
- Clean the device only with a dry cloth.
Warnings
- ⚠️ Do not disassemble the enclosure. The battery may explode when damaged. It is not recommended to attempt to repair the device yourself, as this will result in the loss of warranty.
- The power bank must be stored in a location with a temperature ranging between 15 to 25°C for optimal performance. Too high/low temperature results in the loss of capacity and shorter lifetime of the battery. A device with an excessively heated or cooled battery may not work temporarily.
- Do not dispose of batteries in a fire as they may explode.
Troubleshooting
Issue: The power bank does not charge
- Solution: Adhere to the sequence of connections when connecting to the power supply (for charging).
- Solution: Make sure that the power bank contacts fit tightly with the charger contacts and that they are not dirty.
If the above-listed measures do not help to resolve the problem, please contact the support service on the Canyon website: http://canyon.eu/ask-your-question/
Warranty
For detailed information regarding warranty terms, please refer to: http://canyon.eu/warranty-terms/
Manufacturer & Disposal
Manufacturer: Asbisc Enterprises PLC, 43, Diamond Court, Kolonakiou Str, 4303, Limassol, Cyprus, Agios Athanasios, http://canyon.eu
Disposal: According to local regulations, your product and/or its battery must be disposed of separately from household waste. When this product has reached the end of its service life, take it to a recycling facility designated by local authorities.
Compliance
The product is in compliance with the requirements of Directive 2015/863/EC (or other). All declarations can be downloaded from the website https://canyon.eu/certificates by searching for the device model.
The device features CE, RoHS, and EAC certifications.
Additional Information
Date of manufacture: (see at the package). Made in China.