Craftsman Mower Parts List
Model No. 247.374300
Diagrams Overview
The original document contains diagrams illustrating the assembly and placement of parts for the Craftsman Mower and its associated engine. These diagrams are visual aids to identify parts by number and understand their relationship within the overall assembly. The following sections provide the detailed parts lists derived from the document.
Craftsman Mower Parts
| Ref. No. | Part No. | Description |
|---|---|---|
| 1 | 747-05184A | Blade Control |
| 2 | 749-04680-0637 | Upper Handle |
| 3 | 747-05450 | Grass Catcher Frame |
| 4 | 749-04608A-0637 | Lower Handle |
| 5 | 720-0279 | Wing Nut |
| 6 | 710-1205 | Rope Guide |
| 7 | 710-04998 | Carriage Screw,5/16-18 |
| 8 | 964-04154 | Grass Bag |
| 9 | 720-04072A | Hand Knob |
| 10 | 731-07486 | Side Chute |
| 11 | 725-0157 | Cable Tie |
| 12 | 712-04222 | Nut, Sq., 1/4-20 |
| 13 | 631-04369A | Rear Discharge Door Assembly |
| 14 | 747-0710A | Hinge Pin |
| 15 | 787-01779 | Chute Deflector Bracket |
| 16 | 732-04673 | Torsion Spring - RH |
| 17 | 734-04562 | Wheel, 7" x 1.8" |
| 18 | 710-0895 | Screw, 1/4-15 x .750 |
| 19 | 710-05073 | Screw, 1/4-20 x.500 |
| 20 | 787-01869A-4043 | Deck - 21" |
| 21 | 987-02516 | Hinged Mulch Plug Assembly |
| 22 | 732-04674 | Torsion Spring - LH |
| 23 | 748-0376E | Blade Adapter |
| 24 | 942-0741A | Mulching Blade |
| 25 | 710-1044 | Screw, 3/8-24 x 1.50 |
| 26 | 710-04995A | Screw, 5/16-14 x .750 |
| 27 | 738-04419A | Sldr. Screw, .375 x .126 x 1/4-20 |
| 28 | 712-04217 | Flange Lock Nut, 3/8-16 |
| 29 | 720-04130 | Adjustment Lever Knob |
| 30 | 720-04123A | Wing Nut |
| 31 | 736-0524B | Blade Bell Support |
| 32 | 712-04064 | Nut, Flange Lock, 1/4-20 |
| 33 | 634-04625 | Wheel, 11" x 1.75" |
| 34 | 946-0957 | Control Cable |
| 35 | 710-04683A | TT Screw, 3/8-16 x 1.0 |
| 36 | 731-07203 | Trail shield |
| 37 | 731-07078A | Front Cover |
| 38 | 732-1014C | Torsion Spring |
| 39 | 787-01818A-0637 | Front Height Adjuster Plate |
| 40 | 911-04144A | Rear Axle Assembly |
| 41 | 911-04143B | Front Axle Assembly |
| N/A | Engine (see breakdown) B & S Model No. 09P602-0039-F1 |
Craftsman Engine Parts
Model No. 09P602-0039-F1
| Ref. No. | Part No. | Description |
|---|---|---|
| 1 | 590519 | Cylinder Assembly |
| 3 | 299819s | Kit-Bushing/Seal (Magneto Side) |
| 4 | 590569 | Sump-Engine |
| 5 | 590525 | Head-Cylinder |
| 7 | 799586 | Gasket-Cylinder Head |
| 11 | 590522 | Tube-Breather |
| 12 | 799587 | Gasket-Crankcase |
| 13 | 590512 | Screw (Cylinder Head) |
| 16 | 590538 | Crankshaft |
| 20 | 391483s | Seal-Oil (PTO Side) |
| 22 | 692551 | Screw (Crankcase Cover/Sump) (1/4-20x1.19) |
| 22A | 590763 | Screw (Crankcase Cover/Sump) (1/4-20x.78) |
| 23 | 590544 | Flywheel |
| 24 | 222698s | Key-Flywheel (Aluminum) |
| 25 | 590521 | Piston Assembly (Standard) |
| 26 | 590523 | Ring Set (Standard) |
| 27 | 691588 | Lock-Piston Pin |
| 28 | 699659 | Pin-Piston |
| 29 | 590518 | Rod-Connecting |
| 32 | 691664 | Screw (Connecting Rod) |
| 33 | 590531 | Valve-Exhaust |
| 34 | 590530 | Valve-Intake |
| 35 | 590532 | Spring-Valve (Intake) |
| 36 | 590532 | Spring-Valve (Exhaust) |
| 37 | 590582 | Guard-Flywheel |
| 40 | 590528 | Retainer-Valve |
| 43 | 697799 | Slinger-Governor/Oil |
| 45 | 590514 | Tappet-Valve |
| 46 | 590524 | Camshaft |
| 48 | N/A | Short Block (N/A At This Printing) |
| 58 | 591108 | Rope-Starter |
| 60 | 691915 | Grip-Starter Rope |
| 60A | 799716 | Grip-Starter Rope |
| 75 | 590546 | Washer (Flywheel) |
| 78 | 793480 | Screw (Flywheel Guard) |
| 104 | 590558 | Pin-Float Hinge |
| 117 | 591995 | Jet-Main (Standard) |
| 118 | 591992 | Jet-Main (High Altitude) |
| 121 | 590589 | Kit-Carburetor Overhaul |
| 122 | 590549 | Spacer-Carburetor |
| 125 | 799583 | Carburetor |
| 130 | 691190 | Valve-Throttle (Original Carburetor) |
| 133 | 591120 | Float-Carburetor |
| 155 | 590529 | Plate-Cylinder Head |
| 163 | 799580 | Gasket-Air Cleaner |
| 187 | 791766 | Line-Fuel (Cut to Required Length) |
| 188 | 793480 | Screw (Control Bracket) |
| 192 | 590535 | Adjuster-Rocker Arm |
| 202 | 590517 | Link-Mechanical Governor |
| 209 | 590541 | Spring-Governor (Purple) |
| 222 | 590560 | Bracket-Control |
| 227 | 590520 | Lever-Governor Control |
| 238 | 590533 | Cap-Valve |
| 300 | 590565 | Muffler |
| 305 | 590586 | Screw (Blower Housing) |
| 318 | 793480 | Screw (Mounting Bracket) |
| 332 | 690662 | Nut (Flywheel) |
| 333 | 799582 | Armature-Magneto |
| 334 | 691061 | Screw (Magneto Armature) |
| 337 | 491055s | Plug-Spark |
| 356 | 692390 | Wire-Stop |
| 358 | 590590 | Gasket Set-Engine |
| 404 | 690272 | Washer (Governor Crank) |
| 455 | 590545 | Cup-Flywheel |
| 493 | 590551 | Bracket-Mounting (Carburetor) |
| 505 | 793515 | Nut (Governor Control Lever) |
| 522 | 590580 | Plug-Dipstick/Fill |
| 535 | 799579 | Filter-Air Cleaner Foam |
| 562 | 793514 | Bolt (Governor Control Lever) |
| 601 | 791850 | Clamp-Hose (Green) |
| 613 | 590562 | Screw (Muffler) |
| 615 | 690340 | Retainer-Governor Shaft |
| 616 | 590516 | Crank-Governor |
| 617 | 270344s | Seal-O Ring (Intake Manifold) |
| 621 | 692310 | Switch-Stop |
| 623 | 799581 | Seal-O Ring (Carburetor Spacer) |
| 635 | 692076 | Boot-Spark Plug |
| 718 | 690959 | Pin-Locating (Cylinder) |
| 724 | 697478 | Retainer-Seal |
| 741 | 796210 | Gear-Timing |
| 745 | 691146 | Screw (Brake) (#10-32x.86) |
| 745A | 690859 | Screw (Brake) (#10-32x.5) |
| 770 | 591139 | Kit-Rewind/Blower Housing |
| 830 | 590536 | Stud-Rocker Arm |
| 850 | 100106 | Sealant-Silicone |
| 868 | 590534 | Seal-Valve |
| 875 | 590584 | Base-Air Cleaner |
| 914 | 591103 | Screw (Rocker Cover) |
| 922 | 692135 | Spring-Brake |
| 923 | 691487 | Brake |
| 930 | 590585 | Guard-Rewind |
| 957 | 591003 | Cap-Fuel |
| 968 | 590581 | Cover-Air Cleaner |
| 972 | 590568 | Fuel-Tank |
| 975 | 591492 | Bowl-Float |
| 1022 | 591255 | Gasket-Rocker Cover |
| 1023 | 590513 | Cover-Rocker |
| 1026 | 590515 | Rod-Push |
| 1029 | 590526 | Arm-Rocker (Exhaust) |
| 1029A | 590527 | Arm-Rocker (Intake) |
| 1036 | Label-Emissions (Available from a Briggs & Stratton Authorized Dealer) | |
| 1058 | 381266TRI | Operator's Manual |
| 1127 | 590554 | Screw (Float Bowl to Carburetor Body) |
| 1238 | 590550 | Screw (Carburetor Spacer) |
| 1263 | 697124 | Reed-Breather |
| 1264 | 793453 | Screw (Breather Reed) |
| 1329 | N/A | Replacement Engine (Not Available At This Printing) |
| 1330 | N/A | Repair Manual (Not Available At This Printing) |
| 1395 | 590552 | Screw (Air Cleaner Base to Carburetor) |
| 1472 | 691876 | Seal-O Ring (Dipstick/Fill Plug) |
| Carburetor Overhaul Kit (Key No. 121) | ||
| Engine Gasket Set (Key No. 358) |
Safety Labels
DANGER Label 1
DO NOT OPERATE UNLESS AN UNDAMAGED DISCHARGE COVER OR ENTIRE GRASS CATCHER IS IN PLACE.
DANGER
KEEP HANDS and FEET AWAY
DANGER Label 2
A DANGER AVOID SERIOUS INJURY OR DEATH
DO NOT OPERATE UNLESS AN UNDAMAGED DISCHARGE COVER OR ENTIRE GRASS CATCHER IS IN PLACE.
• KEEP HANDS AND FEET AWAY FROM ROTATING PARTS.
• REMOVE OBJECTS THAT CAN BE THROWN BY THE BLADE IN ANY DIRECTION. WEAR SAFETY GLASSES
• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
• USE EXTRA CAUTION ON SLOPES. DO NOT MOW SLOPES GREATER THAN 15°. MOW ACROSS NEVER UP AND DOWN. LOOK DOWN AND BEHIND BEFORE AND WHILE MOVING BACKWARDS.
READ OPERATOR'S MANUAL. KEEP SAFETY DEVICES (BLADE CONTROL, TRAILING SHIELD, DISCHARGE COVER, ETC.) IN PLACE AND WORKING. IF DAMAGED, REPLACE IMMEDIATELY.
A WARNING
Operation Of This Equipment May Create Sparks That Can Start Fires Around Dry Vegetation. A Spark Arrestor May Be Required. The Operator Should Contact Local Fire Agencies For Laws Or Regulations To Fire Prevention Requirements.
DANGER
KEEP HANDS and FEET AWAY
Precision Plus Cutting System Logo
PRECISION plus TM CUTTING SYSTEM
