Hayward Pro Series Sand Filter Replacement Parts
This document lists replacement parts for the Hayward Pro Series Sand Filter series, including models S166T, S180TC, S210TC, S220TC, S244T2, S244TC, and S270T.
Parts Diagram
The diagram illustrates the various components of the sand filter system. Key parts include:
- 1: Vari-Flo XL Control Valve (available in 1 1/2" and 2" sizes)
- 2: Pressure Gauge
- 3: Valve/Tank O-Ring
- 4: Flange Clamp, Noryl
- 5: Sand Shield - 2004 Corrugated Design
- 6: Lateral Assembly w/Center Pipe (various models specified)
- 7: Laterals (available in threaded and one-piece w/hub options)
- 8: Drain Cap Kit / Drain Cap Assembly
- 9: Filter Support Stand (Skirt)
- 10: System Base
- Sight Glass w/O-Ring
A separate diagram illustrates the 'Folding Umbrella Lateral Assembly' showing its deployment mechanism.
An important notice is included: 'ATTENTION DO-NOT DISCARD SAND FILTER SLEEVED FOR LOADING FILTER SAND MEDIA. BOUCHON DE PROTECTION POUR LE CHANGEMENT DU SABLE.'
Parts List
| Ref. No. | Part No. | Description | Ctn. Qty. | No. Req'd |
|---|---|---|---|---|
| 1a | SP0714T | Vari-Flo XL Control Valve - 1 1/2" | 1 | 1 |
| 1b | SP071621 | Vari-Flo XL Control Valve - 2" | 1 | 1 |
| 2 | ECX270861 | Pressure Gauge | 10 | 1 |
| 3 | GMX600F | Valve/Tank O-Ring | 10 | 1 |
| 4 | GMX600NM | Flange Clamp, Noryl | 5 | 1 |
| 5 | SX202S | Sand Shield - 2004 Corrugated Design | 25 | 1 |
| SX164DA | Lateral Assembly w/Center Pipe S166T | 1 | 1 | |
| 6a | SX180DA | Folding Umbrella Lateral Assembly w/Center Pipe (S180TC) (1997- ) | 1 | 1 |
| 6b | SX210DA | Folding Umbrella Lateral Assembly w/Center Pipe (S210TC) (1997- ) | 1 | 1 |
| 6c | SX220DA | Folding Umbrella Lateral Assembly w/Center Pipe (S220TC) (1997- ) | 1 | 1 |
| 6d | SX270DA2X | Folding Umbrella Lateral Assembly w/Center Pipe (S244T2) (2003- ) | 1 | 1 |
| 6e | SX244DA | Folding Umbrella Lateral Assembly w/Center Pipe (S244TC, S270T) (1997- ) | 1 | 1 |
| 7a | SX200QPAK10 | Lateral (S180T) (2004 and Prior) - threaded - 10 pack | 10 | 1 |
| 7b | SX240DPAK10 | Lateral (S210T, S220T, S230T, S244T) (2004 and Prior) - threaded - 10 pack | 10 | 1 |
| 7c | SX200QNPAK10 | Lateral (One Piece) w/Hub See Diag. A (S166T, S180T only) - 10 pack | 10 | 1 |
| 7d | SX240DNPAK10 | Lateral (One Piece) w/Hub See Diag. A (all except S166T and S180T) - 10 pack | 10 | 1 |
| 8a | SX180HG | Drain Cap Kit (2005 and prior) | 25 | 1 |
| 8b | SX180LA | Drain Cap Assembly - Cap, Gasket, Screen | 1 | 1 |
| 9 | S210J | Filter Support Stand (Skirt) (all except S166T) | 2 | 1 |
| 9 | SX164B | Filter Support Stand (Skirt) - S166T only | 1 | |
| 10 | SX180K | System Base - S180T Systems | 2 | 1 |
| - | SPX0710MA | Sight Glass w/O-Ring |
