LED Stage Lighting Equipment Instructions
18 PCS 4-in-1 + colorful light With strip
Important Safety Instructions
Please read the instructions carefully for the use, operation, and maintenance of this product.
- Please keep the instruction manual for future viewing. If you sell it to other users, please confirm that they have also received this manual.
- All the equipment is completely from the manufacturer. Please operate according to the instructions; damage caused by non-compliance is not covered by the warranty.
- After opening the packaging, please check whether the product is damaged in the transportation works before use.
- This product is dedicated indoors and can only be used in dry environments.
- It is recommended that technicians familiar with the product operate the product.
- Use safety rope when installation. Please do not lift the entire product through the lamp head.
- The product must be installed in a ventilated environment and at least 50cm from the surface.
- Make sure there are no vents holes, overheating the product.
- Before operation, make sure that the voltage and power supply frequency meet the product requirements.
- Yellow and green conductors must be grounded to avoid electric shock.
- The maximum temperature is TA: 40°C. Stop operating when the ambient temperature exceeds the maximum temperature.
- Please do not connect this product to the other dimmers.
- In the first use, it may smoke or smell bad, and these will disappear after a few minutes.
- Make sure there is no flammable around before use to avoid a fire!
- Please check the power cord carefully and replace it immediately with any damage.
- Avoid long runs to shorten their service life. Avoid any flammable liquid, water, or metal objects from entering the lamp.
- In the event of an accident, please cut off the power immediately.
- Please do not use it in a dirty or dusty environment, and remember to clean the device frequently.
Product Description and Operation
The LED stage lighting equipment features an 18 PCS 4-in-1 LED array with a colorful light strip. The device is controlled via DMX512 and has various operational modes.
1. Key Description:
The control panel features a display and four keys: MENU, UP, DOWN, and ENTER.
- MENU: function key
- UP: Key
- DOWN: key
- ENTER: Confirm key
Operation Instructions: Pressing the MENU key will cycle through 12 different functions. The number before the decimal point of the digital tube represents the current function (refer to the function table). The number after the decimal point represents the parameter corresponding to the function. Press the UP or DOWN key to modify its parameter value.
2. LED Display Window Function Comparison Table
After all functions are selected, press the ENTER key to save and confirm.
| Number | Content | Functional Description |
|---|---|---|
| 1 | A.001 / D.001 | A001: 10 channels, D001: 6 channels. Press the UP and DOWN keys to add or subtract values from 001 to 512. |
| 2 | CH06/CH10 | Press the Up or Down key to select 10-channel or 6-channel mode. |
| 3 | r.000 | Select red color, (000-255) up and down keys to change brightness. |
| 4 | g.000 | Select green color, (000-255) up and down keys to change brightness. |
| 5 | b.000 | Select blue color, (000-255) up and down keys to change brightness. |
| 6 | U.000 | Select white color, (000-255) up and down keys to change brightness. |
| 7 | FH.00 | Strobe, (01-99) press button Up/Down to change speed. |
| 8 | CL.01 | Manually change color. Press button Up/Down to change color. |
| 9 | CC.71 | Color jumping (000~255) press button Up/Down to change speed. |
| 10 | dE.72 | Color change gradually (000~255) press button Up/Down to change speed. |
| 11 | CP.73 | Color pulse change (000~255) press button Up/Down to change speed. |
| 12 | SOU.9 | Sound control (1-9) 9: Colorful voice control changes; 1-8 voice control strobe. |
3. DMX512 6CH
| CH | Content | Functional Description |
|---|---|---|
| 1CH | R dimming | Red dimming from dark to bright. |
| 2CH | G dimming | Green dimming from dark to bright. |
| 3CH | B dimming | Blue dimming from dark to bright. |
| 4CH | W dimming | White dimming from dark to bright. |
| 5CH | Circle control function selection | 0-3 off |
| 4-50 function 1, 51-100 function 2, 101-150 function 3, 151-200 function 4, 201-255 function 5, | ||
| 6CH | Circle function speed | Speed from slow to fast. |
4. DMX512 10CH
| CH | Content | Functional Description |
|---|---|---|
| 1CH | Total dimming | From dark to bright. |
| 2CH | R dimming | Red dimming from dark to bright. |
| 3CH | G dimming | Green dimming from dark to bright. |
| 4CH | B dimming | Blue dimming from dark to bright. |
| 5CH | W dimming | White dimming from dark to bright. |
| 6CH | Strobe | Strobe, speed from slow to fast. |
| 7CH | Function option | 0-50 Invalid |
| 51-100 Color selection | ||
| 101-150 Jump change | ||
| 151-200 Gradual change | ||
| 201-250 Pulse change | ||
| 251-255 Sound control | ||
| 8CH | Function speed | 7CH (51-250) channel function speed from slow to fast, 7CH (251-255) sound control mode selection. |
| 9CH | Circle control function selection | 0-3 off |
| 4-50 function 1, 51-100 function 2, 101-150 function 3, 151-200 function 4, 201-255 function 5, | ||
| 10CH | Circle function speed | Speed from slow to fast. |
