Initial Setup
Remove the protective label before first use.
Fully charge the case and earbuds for 1.5 hours.
No sound in one earbud?
- Turn off Bluetooth on your device.
- Put both earbuds back in the case for 30 seconds.
- Take them out, wait for 1 minute, and reconnect via Bluetooth.
Diagram description: An earbud with a protective label being removed, a charging case with earbuds inside, and a USB-C cable connecting to a power source.
Pairing
1. Open the charging case and remove the earbuds. The earbuds will automatically turn on and pair with each other. The white indicator light of the earbuds flash, indicating that it is ready to be paired.
2. Turn on the Bluetooth on your phone, search for "1HORA-AUT203" and select it. The earbuds will successfully connect to your phone and you will receive a prompt saying "connected."
Diagram description: Two smartphone screens showing Bluetooth settings. The first shows '1HORA-AUT203' as 'No conectado' (Not connected), and the second shows it as 'Conectado' (Connected).
Product Overview
Components:
- 1. Charging Case: The case for storing and charging the earbuds.
- 2. Earbuds: The wireless audio devices.
- 3. Earbuds Indicator Light: Shows charging and pairing status for the earbuds.
- 4. Touch Button: Capacitive touch area on the earbuds for control.
- 5. Charging Interface: The connection point inside the case for the earbuds.
- 6. Type-C Charging Port: Port on the case for charging the case itself.
Diagram description: Diagrams illustrating the charging case, a single earbud with callouts for touch button and charging interface, and the Type-C charging port on the case.
Packing List
- Earbuds x2
- Ear Tips x4 (Smallest ear tips are pre-installed on earbuds)
- Charging Case x1
- 1 Meter Type-C Cable x1
- User Manual x1
Diagram description: Illustrations of the items included in the package: two earbuds, four ear tips of different sizes, the charging case, a Type-C charging cable, and the user manual.
Charging Instructions
Earbuds Charging:
Place the earbuds into the charging case. The white indicator light on the earbuds will stay on and turn off when fully charged.
Charging the Case:
- When the battery of the charging case is low, the green indicator light on the charging case flashes.
- Use the provided Type C charging cable to connect the charging case to a charger. The red indicator light will flash while charging and stay on when the charging case is fully charged.
LED Indicator
Earbuds:
- Steady White Light: Charging in progress
- White Light on for 1 Second: Power on
- Blinking White Light: On Pairing
- All Lights Off: Power off or connected to phone
Charging Case:
- Blinking Red Light: Charging in progress
- Steady Red Light: Charging case fully charged
- Blinking Green Light: Low battery reminder
Phone Control
Answer Call:
Single tap either earbud.
End Call:
Double-tap either earbud.
Reject Call:
Press and hold either earbud for 1.5 seconds.
Diagram description: Diagrams showing earbuds with icons indicating single tap, double tap, and press-and-hold gestures for call management.
Music Control
Play/Pause:
Single tap either earbud.
Next Song:
Double-tap either earbud.
Previous Song:
Triple-tap either earbud.
Diagram description: Diagrams showing earbuds with icons indicating single tap, double tap, and triple tap gestures for music playback control.
Voice Assistant
Activate Siri:
Press and hold either earbud for 1.5 seconds (while music is paused).
Diagram description: Diagram showing an earbud with a microphone icon and a press-and-hold gesture indicated for activating the voice assistant.
Frequently Asked Questions (FAQs)
Playback Duration Issues:
Q: How long does it last with a full charge? A: Over 17 hours total listening time with the charging case, and 5 hours playtime for the earbuds with 100% volume.
Connectivity Issues:
Q: Earphones not connecting or pairing? A: Try resetting by placing earbuds in the case for 1 minute. Ensure Bluetooth is enabled and earbuds are within 1 meter. Restart device Bluetooth or re-pair if issues persist.
Charging Issues:
Q: Earphones not charging properly? A: Check for debris in charging case and ports. Ensure earbuds are aligned with charging pins. Try a different charging cable or charger.
No Sound Issues:
Q: No sound in headphones? A: Verify Bluetooth connection, check volume settings, test with another audio device, try a different audio source, and clean earbuds jack if dirty.
Safety Instructions
- Be aware of surroundings when walking to avoid traffic accidents.
- Use the lowest volume level to protect hearing. Do not turn volume too high.
- If product contacts flammable materials or liquids (like water), stop use immediately to prevent fire, malfunction, or electric shock.
- Do not attempt to disassemble the product to avoid malfunction or electric shock. Modifications void warranty.
- Do not touch the charging port with wet hands.
- Stop using immediately if you feel uncomfortable.
- Consult a doctor before use if you use a medical device like a pacemaker.
- Keep out of reach of children.
Warranty Statement
1HORA provides a 12-month warranty service. The warranty does not cover:
- Expired warranty period.
- Altered warranty card.
- Damage from misuse, abuse, improper transportation, use, maintenance, or storage.
- Damage from force majeure (earthquakes, wars, fires, accidents).
- Damage to zippers or buckles due to excessive force.
- Stitching or tearing caused by overloading.
- Damage caused by sharp objects.
- Products showing signs of burning or water immersion.
- Damage from unauthorized disassembly or modification.
- Normal wear and tear, aging, discoloration, cracking.
- Changed or damaged original identification label.
Completeness and appearance of the product and accompanying materials are not covered. Inspect upon receiving.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.