SALUS FC600 Fan Coil Thermostat

Quick Guide

Introduction

The SALUS FC600 is a device designed for controlling fan coil units in both 2-pipe and 4-pipe systems, and for managing home or working environment temperatures. For internet connectivity (Online Mode), it requires the SALUS Universal Gateway (UGE600) and the SALUS Smart Home App. It can also be used without an internet connection (Offline Mode). For the full PDF manual, visit www.salus-manuals.com.

Product Compliance

This product complies with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU, 2014/53/EU, and 2011/65/EU. The full text of the EU Declaration of Conformity is available at www.saluslegal.com.

Safety Information

Use in accordance with regulations. Indoor use only. Keep equipment dry. Disconnect equipment before cleaning with a dry towel.

Terminal Descriptions

Terminal Name	Function
L, N	230V AC power supply
V1	4 pipe: Heating valve output - 230V AC 2 pipe: Heating or Cooling valve output - 230V AC
V2	4 pipe: Cooling valve output - 230V AC 2 pipe: N/A
F1	Fan Speed control (Low level) - 230V AC
F2	Fan Speed control (Medium level) - 230V AC
F3	Fan Speed control (High level) - 230V AC
S1	Heat/Cool changeover (or pipe sensor - only in 2-pipe system)*
S2	Occupancy sensor or external sensor
COM	Common Terminal for sensor and switch

Wiring Diagram Description

The wiring diagram shows the connections for the FC600 thermostat. Power is supplied via L and N terminals (230V AC). Valve outputs are V1 and V2, supporting 4-pipe (separate heating/cooling) or 2-pipe (combined heating/cooling) systems. Fan speed control is managed by F1 (Low), F2 (Medium), and F3 (High) terminals, each providing 230V AC output. S1 and S2 terminals are for external sensors or switches, with S1 also supporting heat/cool changeover or pipe sensing in 2-pipe systems. COM is the common terminal for sensors and switches. A fuse and fan connection are also indicated.

LCD Icon Description

1. Auto heat/cool selection
2. Schedule icon
3. Permanent/temporary override
4. Fan is running (icon is animated)
5. Fan speed (low, medium, high, Auto, OFF)
6. Wireless communication with the Universal Gateway
7. FC600 is connected to the Universal Gateway and Internet
8. Temperature unit
9. Heating Mode ON
10. Cooling Mode ON
11. Standby mode
12. Occupancy/vacancy sensor
13. Lock function
14. AM/PM
15. Eco Mode
16. Day indicator
17. Filter icon
18. Current time
19. Sensor indicators
20. Timer icon
21. Program number
22. S1/COM Sensor indicators
23. S2/COM Sensor indicators
24. Room/setpoint temperature
25. Settings icon

Button Functions

Key	Function	Operation
M (Mode button)	Mode selection (Heat/Cool/Eco)	Short press: Confirm function Long press (2 sec): Activate/deactivate Standby Mode.
UP/DOWN (Arrow buttons)	Increase / Decrease values	Short press: Adjust value Long press (2 sec): Activate/deactivate Permanent Override / AUTO / Heat/Cool/Eco selection
Fan Speed	Set Fan Speed (Low, Medium, High, Auto, Off)	Short press: Cycle through speeds
Programming	Programming schedule, Sensor offset, Time & Date settings	Long press (2 sec): Access programming menus

Note: Mode button operation can vary based on Online/Offline mode and S1/COM/S2 input usage.

Installation in Online Mode

To use the FC600 with the SALUS Smart Home App and Universal Gateway (UGE600):

Ensure your Universal Gateway is installed and added to the app. The gateway's LED should be blue.
Power on the FC600 by pressing or switching it via the App.
Set up your device on the App by following the on-screen instructions.
Upon successful setup, the thermostat will enter Standby Mode.

Note: All system settings are automatically saved to the SALUS cloud server.

Installation in Offline Mode

For standalone operation without internet:

Select Pipe System: Press UP/DOWN buttons to choose between 2-pipe or 4-pipe system, then press M to confirm.
Select Operating Mode: Press UP/DOWN to select Cooling (❄️), Heating (?), or Cooling and Heating (❄️?). Press M to confirm.
Set Time: Press and hold M for 2 seconds, then press M to confirm. Use UP/DOWN to select hour format (12/24h) and press M to confirm. Use UP/DOWN to set the hour, press M to confirm. Repeat for minutes.
Installer Settings (Optional): Access installer settings by pressing M for 2 seconds, then pressing M again. Use UP/DOWN to navigate and select parameters like S1/S2 function (e.g., noFn, HCCO, Auto, sens, door) and press M to confirm. Refer to the full manual for a complete list of parameters at www.salus-manuals.com.
Launch Thermostat: After setup, press and hold the M button for 2 seconds to launch the thermostat.

Changing from Offline Mode to Online Mode

To enable app control:

Follow the steps for Offline Mode installation first.
To switch to Online Mode, press and hold M for 2 seconds, then press M again.
Press and hold M for 5 seconds to initiate the mode change.
In the SALUS Smart Home App, press "Scan for equipment" and follow the on-screen instructions.
The thermostat will enter Standby Mode upon successful connection.

Note: System settings are automatically saved to the SALUS cloud server, eliminating the need for re-installation in Online mode.

Factory Reset

To reset the thermostat to factory settings:

Press and hold M for 2 seconds, then press M again.
Press and hold M for 5 seconds to initiate the reset process.
Confirm the reset if prompted.

Note: This action will permanently remove all user settings.

Contact Information

Distributor:
QL CONTROLS Sp. z o.o., Sp. k.
ul. Rolna 4
43-262 Kobielice
Poland
salus@salus-controls.pl

Importer:
SALUS Controls Plc
Units 8-10 Northfield Business Park
Forge Way, Parkgate,
Rotherham S60 1SD
United Kingdom

Official Distributor for Spain and Portugal:
Sysclima
Polígono de la Serna
Calle C, Nave 6.14
E-31500 Tudela (Navarra)
www.sysclima.com

For more information, visit www.salus-controls.eu.

SALUS Controls is a member of the Computime Group. Maintaining a policy of continuous product development, SALUS Controls plc reserves the right to change specifications, design, and materials of products listed in this brochure without prior notice. Issue Date: V 2020

	SALUS FC600 Fan Coil Thermostat Quick Guide - Installation & Operation Concise guide for the SALUS FC600 Fan Coil Thermostat, covering installation (online/offline modes), operation, terminal descriptions, button functions, and LCD icons. Learn how to control your home climate efficiently.
	Salus FC600 Fan Coil Thermostat Quick Guide \| Installation & Setup A quick guide to installing and operating the Salus FC600 Fan Coil Thermostat. Learn about wiring options, smart home integration with UG600/UGE600, and basic functions for efficient temperature control.
	SALUS UGE600 Universal Gateway Installation and Operation Guide A comprehensive guide to installing and operating the SALUS UGE600 Universal Gateway, enabling wireless control of SALUS iT600 systems via smartphone or computer.
	SALUS HTRS-RF(30) Wireless Digital Room Thermostat Installation Guide Comprehensive guide for installing and pairing the SALUS HTRS-RF(30) wireless digital room thermostat with iT600 series devices. Learn about online and offline modes, button functions, and setup procedures for heating systems.
	SALUS VS10/VS20RF Digital Programmable Wireless Thermostat Quick Guide SALUS VS10/VS20RF Quick Guide: Learn how to install and pair the digital programmable wireless 4-in-1 thermostat with iT600 series devices like KL08RF, TRV, and RX10RF. Covers online/offline modes, wiring, and setup for home heating systems.
	SALUS RT310i Smartphone Controlled Programmable Thermostat Quick Guide A quick guide to installing and operating the SALUS RT310i programmable thermostat, including pairing instructions, mode explanations (Schedule, Manual, Holiday, Frost), app features, and troubleshooting tips. Features detailed instructions and button functions for efficient home climate control.
	SALUS T105/T105RF Digital Programmable Thermostat Quick Guide User manual and quick guide for the SALUS T105 and T105RF digital programmable thermostats, covering installation, operation, programming, and technical specifications.
	SALUS VS10/VS20 RF Digital Programmable Wireless Thermostat Quick Guide A quick guide for SALUS VS10 and VS20 RF digital programmable wireless thermostats, covering installation, setup, and pairing with iT600 series devices like wiring centers, TRVs, and boiler receivers.