TP-Link Omada IES208G Industrial Easy Management Switch Datasheet
Omada Industrial Easy Management Switch
Model: IES208G
Omada 8-Port Gigabit Industrial Easy Management Switch
Highlights
- 8 Gigabit ports (6 x RJ45, 2 x RJ45/SFP Combo)
- Professional industrial design: -40°C ~ 75°C operating temperature, 6 kV lightning protection, 1+1 power input redundancy
- Abundant L2 features: VLAN, QoS, STP/RSTP
- Centralized cloud management via web or Omada app*
- Durable IP40 aluminum case, DIN rail/wall mounting supported
Product Appearance
The IES208G features a robust industrial design with 6 Gigabit RJ45 ports and 2 Gigabit Combo RJ45/SFP slots. The unit is designed for DIN rail or wall mounting and has an IP40 rated aluminum casing. The rear of the device shows the power input terminals and a fault alarm relay.
Product Specifications
Hardware Features & Performance | ||
Model Name | IES208G | |
General | Interface | 6 x 10/100/1000 Mbps RJ45 Ports 2 x Gigabit Combo RJ45/SFP Slots |
Flash Memory | 64 Mbit | |
Port Standards | IEEE 802.3i: 10BASE-T Ethernet IEEE 802.3u: 100BASE-X Fast Ethernet IEEE 802.3ab: 1000BASE-T Gigabit Ethernet IEEE 802.3z: 1000BASE-X Gigabit Ethernet (Fiber) IEEE 802.3x: Flow Control IEEE 802.1p: Traffic Class Acceleration and Dynamic Multicast Filtering IEEE 802.1q: Virtual Bridged Local Area Networks IEEE 802.1d: STP (Spanning Tree Protocol) IEEE 802.1w: RSTP (Rapid Spanning Tree Protocol) IEEE 802.1ab: LLDP |
|
Performance | Switching Capacity | 16 Gbps |
Packet Forwarding Rate | 11.9 Mpps | |
MAC Address Table | 8 K | |
Packet Buffer | 4 Mbit | |
Transmission Method | Store and Forward | |
Jumbo Frames | 15 KB | |
Power Supply | Power Input | 9.6-60 V DC Power Input Redundancy |
Overload Current Protection | Yes (O) | |
Overload Voltage Protection | Yes (O) | |
Reverse Polarity Protection | Yes (O) | |
Standby Power Consumption | Max. 1.79 W at 12 VDC Max. 2.16 W at 24 VDC Max. 3.17 W at 48 VDC |
|
Max. Power Consumption | Max. 4.46 W at 12 VDC Max. 4.17 W at 24 VDC Max. 5.99 W at 48 VDC |
|
Fault Alarm Relay Type | Max. 24 V / 1 A (NC Contact) | |
Physical & Environment | MTBF (Mean Time Between Failures) | 899526 hours at 25°C |
Max Heat Dissipation | Max. 15.16 BTU/hr at 12 VDC Max. 14.18 BTU/hr at 24 VDC Max. 20.37 BTU/hr at 48 VDC |
|
Dimensions (W x D x H) | 129 x 95 x 45 mm (5.1 x 3.7 x 1.8 in) | |
Fan Quantity | Fanless | |
Installation | DIN Rail/Wall Mounting | |
IP Rating | IP40 | |
Operating Temperature | -40°C ~ 75°C (-40°F ~ 167°F) | |
Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) | |
Operating Humidity | 5% ~ 95% RH, Non-condensing | |
Storage Humidity | 5% ~ 95% RH, Non-condensing | |
Surge Protection | ±6 kV Common Mode for Ethernet Ports ±4 kV Common Mode for DC Power Input Port |
|
ESD Protection | Air Discharge: ±8 kV, Contact Discharge: ±6 kV | |
Certifications | KC, CE, FCC, RoHS | |
EMC | IEC 61000-4-2 ESD: Contact: 6 kV, Air: 8 kV IEC 61000-4-3 RS: 80 MHz ~ 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV, Signal: 2 kV IEC 61000-4-5 Surge: Power: 4 kV, Signal: 6 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF: 100 A/m EN 55032/35 EN61000-6-2 EN61000-6-4 |
|
Shock | IEC 60068-2-27 | |
Free Fall | IEC 60068-2-32 | |
Vibration | IEC 60068-2-6 |
Software Features
SDN Support
- Supports Hardware Controller, Software Controller, and Cloud-based Controller
- Auto Device Discovery
- Batch Configuration
- Batch Firmware Upgrade
- Integrated Configuration
L2 Features
- Link Aggregation
- Static Link Aggregation
- Max. 2 aggregation groups and max. 4 ports per group
- Loopback Detection
- Flow Control
- 802.3x Flow Control
- Mirroring
- Port Mirroring
- One-to-One
- Many-to-One
- Ingress/Egress/Both
- Port Statistics
- Port Mirroring Status
- Traffic Statistics
- 802.1ab LLDP
- Spanning Tree
- STP (802.1d)
- RSTP (802.1w)
L2 Multicast
- IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Fast Leave
VLAN
- MTU VLAN
- Port Based VLAN
- 802.1Q Tagged VLAN Functionality
- Max. 32 VLAN Groups
- 4K VID
QoS
- 802.1p DSCP Priorities
- 8 Priority Queues
- Priority Reservation Mode
- WRR (Weighted Round Robin)
- Queue Weight Settings
- Bandwidth Control
- Port-Based Rate Limiting
- Storm Control
- Multiple Control Modes (kbps/pps)
- Broadcast/Multicast/Unknown Unicast Control
Management
- Web-based GUI
- DHCP Client
- Cable Diagnostics
- DDM (Digital Diagnostics Monitoring)
Notes
*This feature requires an Omada Controller. For Zero-Touch Provisioning, Omada Central (Omada Central Standard or Omada Central Essentials) must be used. For supported models, please refer to the Omada Cloud-based Controller (Omada Cloud Standard) product list or Omada Cloud Essentials product list.