INSTRUCTIONS
Important Notes
Please ensure that the electricity is powered off during installation.
Only a professional electrician should install this type of product.
Installation Steps
Step 1: Prepare Ceiling Mount
Drill a hole at the ceiling with an impact bit machine. Insert the expansion anchor into the hole using a hammer. Rotate to install the ceiling hook to the anchor.
Diagram Description: Illustrates drilling a hole (labeled A) into a ceiling, inserting an expansion anchor (labeled B) into the hole, and then attaching a ceiling hook to the anchor.
Step 2: Hang Fixture
Hang the shock cord hook to the ceiling hook.
Diagram Description: Shows a ceiling hook attached to a fixture hook (labeled B). A wire is depicted passing through a wire connector (labeled C).
Step 3: Adjust Wire Length
Let the wire go through the open side of the shock cord hook. Adjust the wire to the suitable distance.
Diagram Description: Depicts a wire being threaded through the open side of a shock cord hook, with an arrow indicating the adjustment of the wire's length.
Step 4: Attach Lampshade
Install the lampshade to the fixture with the socket ring.
Diagram Description: Shows a lampshade (labeled E) being attached to the fixture base using a socket ring (labeled D).
Dimmable Switch
The dimmable switch should be used with a bulb that supports dimming. Compatible bulbs include E26 incandescent bulbs or dimmable LED bulbs.
Diagram Description: A close-up view of a dimmable switch mechanism integrated into the light fixture's cord.
Included Parts
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Ceiling Hook/Anchor Set | 3 PCS |
| B | Shock Cord Hook | 3 PCS |
| C | Wire Connector | 2 PCS |
| D | Socket Ring | 1 PCS |
| E | Lampshade | 1 PCS |
Diagram Description: A visual breakdown of the included components, labeled A through E, with their respective quantities indicated.
