MEAN WELL APV-12 Series 12W Single Output Switching Power Supply

Features

Constant voltage design
Universal AC input / Full range
Protections: Short circuit / Over load / Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
Class II power unit, no FG
Class 2 power unit
Pass LPS
IP42 design
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices) (Note.7)
100% full load burn-in test
Low cost, high reliability
2 years warranty

Specification

GTIN CODE	MW Search: https://www.meanwell.com/serviceGTIN.aspx
MODEL	APV-12-5	APV-12-12	APV-12-15	APV-12-24
DC VOLTAGE	5V	12V	15V	24V
RATED CURRENT	2A	1A	0.8A	0.5A
CURRENT RANGE	0~2A	0~1A	0~0.8A	0~0.5A
RATED POWER	10W	12W	12W	12W
RIPPLE & NOISE (max.) Note.2	100mVp-p	120mVp-p	120mVp-p	150mVp-p
VOLTAGE TOLERANCE Note.3	±5.0%
LINE REGULATION	±1.0%
LOAD REGULATION	±2.0%
SETUP, RISE TIME	20ms/230VAC	1500ms, 30ms / 230VAC
HOLD UP TIME (Тур.) Note.6	15ms/115VAC at full load	1500ms, 30ms / 115VAC at full load
VOLTAGE RANGE Note.4	90~264VAC / 127~370VDC
FREQUENCY RANGE	47~63Hz
EFFICIENCY (Typ.)	76%	82%	82%	84%
AC CURRENT	0.2A/230VAC	0.35A/115VAC
INRUSH CURRENT(Typ.)	COLD START 70A(twidth=185µs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER	17 units (circuit breaker of type B) / 29 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT	0.25mA/240VAC
OVER LOAD PROTECTION	Above 105% rated output power. Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE PROTECTION	5.75~6.75V	13.8~16V	17.5~21V	27.6~32.4V
WORKING TEMP.	-30~+70°C (Refer to "Derating Curve")
WORKING HUMIDITY	20~90% RH non-condensing
STORAGE TEMP., HUMIDITY	-40~+80℃, 10~95% RH
TEMP. COEFFICIENT	±0.03%/℃ (0~50℃)
VIBRATION	10~500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS Note.8	UL8750, CSA C22.2 No.250.0-08, BIS IS15885 (except for 15V), EAC TP TC 004, IP42, BS EN/EN 62368-1 approved
WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC
SAFETY & EMC	ISOLATION RESISTANCE	I/P-O/P:>100M Ohms / 500VDC/25°C/70% RH
EMC EMISSION	Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY	Compliance to BS EN/EN55035, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020
MTBF	7488.9K hrs min. Telcordia SR-332 (Bellcore);	1132.5K hrs min. MIL-HDBK-217F (25°C)
OTHERS	DIMENSION	774029(LWH)
PACKING	0.08Kg; 120pcs/11.8Kg/1.06CUFT

Notes

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltage. Please check the static characteristics for more details. Please connect L line to the positive pole and N line to the negative pole under DC input.
The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
This product is not intended for LED lighting luminaire applications in the EU. (In the EU the LPF/NPF/XLG series are recommended.)
The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model. Please contact MEAN WELL for details.
The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
Products sourced from the Americas regions may not have the ENEC/BIS/CCC logo. Please contact your MEAN WELL sales for more information.
For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Mechanical Specification

The power supply has a compact plastic case with dimensions of 77*40*29mm (L*W*H). It features AC input terminals (L and N) and DC output terminals (+V and -V). The case temperature should not exceed the specified limit (T case).

Refer to the diagram for detailed dimensions and terminal connections.

Block Diagram

The block diagram illustrates the internal components and signal flow of the power supply. It includes an EMI filter, rectifiers, a power switching section with PWM control, and output rectifiers and filters. A detection circuit is also present.

Derating Curve

The derating curve shows the relationship between ambient temperature and load percentage. For the 5V model, the derating starts at approximately 45°C. For other models, derating begins at a higher temperature, around 50°C.

Static Characteristics

The static characteristics graph displays the load percentage versus input voltage. The power supply operates efficiently across a wide input voltage range, typically from 100VAC to 240VAC, maintaining a high load percentage.

For detailed information, please refer to https://www.meanwell.com/service Disclaimer.aspx

	MEAN WELL APV-16E Series 16W LED Power Supply Datasheet Technical specifications and features for the MEAN WELL APV-16E series 16W single output AC/DC constant voltage LED power supply. Includes detailed electrical and mechanical data.
	Mean Well PLM-12 Series 12W Single Output LED Power Supply Technical specifications and features of the Mean Well PLM-12 series, a 12W single output AC/DC LED power supply with active PFC, constant current design, and isolated plastic case. Suitable for various LED lighting applications.
	MEAN WELL HDR-15 Series 15W Ultra Slim DIN Rail Power Supply Technical specifications, features, applications, and mechanical details for the MEAN WELL HDR-15 series 15W ultra-slim DIN rail power supply. This AC-DC converter is designed for household and industrial automation, offering universal input, high efficiency, and comprehensive protection features.
	MEAN WELL LRS-35 Series: 35W Single Output Switching Power Supply This document details the MEAN WELL LRS-35 series, a 35W single-output enclosed switching power supply. It highlights features such as universal AC input, low profile design, high operating temperature, comprehensive protections, and compliance with international safety standards, making it suitable for industrial automation, control systems, electronic equipment, and household appliances.
	MEAN WELL RS-15 Series 15W Single Output Switching Power Supply Datasheet Technical specifications and features for the MEAN WELL RS-15 series of 15W single output switching power supplies. Includes details on electrical characteristics, protections, environmental conditions, safety, and EMC compliance.
	MEAN WELL LRS-600 Series: 600W Single Output Switching Power Supply Datasheet Detailed technical specifications and features for the MEAN WELL LRS-600 series of 600W single output enclosed switching power supplies, designed for industrial automation, control systems, and electronic equipment.
	MEAN WELL RSP-500 Series 500W Single Output PFC Power Supply Datasheet Detailed technical specifications, features, applications, and mechanical information for the MEAN WELL RSP-500 series of 500W single output AC/DC power supplies with Active PFC.
	MEAN WELL RPS-60 Series 60W Medical Power Supply - Technical Specifications Detailed specifications for the MEAN WELL RPS-60 series 60W medical power supply, featuring 2xMOPP safety, low leakage current, and high efficiency. Includes electrical, environmental, and EMC data.