VIZIO VSB207BT Sound Bar Quick Start Guide

Important Safety Instructions

Your Sound Bar is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent damage, observe the following rules for installation, use, and maintenance. Read these instructions before operating and keep them in a safe place.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other components.
• Unplug the power cord before cleaning. Use a damp cloth; do not use liquid or spray cleaners or abrasive cleaners.
• Always use manufacturer-recommended accessories for compatibility.
• When moving from a cold to a warm environment, condensation may form. Wait before turning on the Sound Bar to avoid fire, electric shock, or component damage.
• Maintain a distance of at least 3 feet from heat sources like radiators or ovens. Do not install near smoke or moisture, as this may cause fire or electric shock.
• Ensure ventilation slots in the back and bottom are not blocked to prevent overheating. Do not place in a bookcase or cabinet without proper ventilation.
• Never insert objects into slots or openings, or place objects on top of the Sound Bar, as this can cause short circuits, fire, or electric shock. Never spill liquids on the Sound Bar.
• Operate only from the power source indicated on the AC/DC adapter label. Consult your dealer or local power company if unsure about your home's power supply.
• Only use the specified voltage. Other voltages may cause fire or electric shock.
• Replace the power cord if using a different voltage than specified. Contact your dealer for information.
• The AC/DC adapter has a three-pronged grounded plug. Use only in a grounded outlet. If your outlet is not grounded, have an electrician install the correct one or use an adapter to ground the Sound Bar safely. Do not defeat the plug's safety purpose.
• Power is always flowing when connected to an outlet. Unplug the power cord to totally disconnect power.
• The lightning flash with an arrowhead symbol ⚡ within an equilateral triangle alerts you to un-isolated, dangerous voltage that may pose an electric shock risk.
• The exclamation point ❗ within an equilateral triangle alerts you to important operating and servicing instructions in the accompanying literature.
• Do not overload power strips and extension cords, as this can result in fire or electric shock.
• The wall socket should be near the Sound Bar and easily accessible.
• Do not touch the power cord during lightning to avoid electric shock.
• Unplug the Sound Bar during lightning storms or when not in use for extended periods to protect against power surges.
• Do not attempt to repair the Sound Bar yourself. Opening covers may expose you to high voltages, electric shock, or other hazards. Refer all servicing to qualified personnel.
• Keep the Sound Bar away from moisture. Do not expose it to rain or moisture. If water penetrates, unplug the cord and contact your dealer. Continued use may result in fire or electric shock.
• Do not use if any abnormality occurs. If smoke or odor is apparent, unplug the cord and contact your dealer immediately. Do not attempt self-repair.
• Avoid using dropped or damaged appliances. If the housing is damaged, internal components may function abnormally. Unplug immediately and contact your dealer for repair. Continued use may cause fire or electric shock.
• Do not install in areas with heavy dust or high humidity, as this may cause fire or electric shock.
• Ensure power cords and cables are unplugged before moving the Sound Bar.
• When unplugging, hold the power plug, not the cord, to prevent damage and electric shock. Unplug the cord if not used for an extended period.
• To reduce electric shock risk, do not touch connectors with wet hands.
• Insert remote control batteries according to instructions. Incorrect polarity may cause battery leakage, damaging the remote or causing injury.
• Contact your dealer if the power cord fails or frays, liquid sprays or objects drop into the Sound Bar, the Sound Bar is exposed to rain or moisture, the Sound Bar is dropped or damaged, or its performance changes substantially.

Battery Warning

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

The remote control contains a coin/button cell battery. If swallowed, it can cause severe internal burns in just two hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Batteries (battery pack or installed batteries) shall not be exposed to excessive heat such as sunshine or fire.

Package Contents

The package includes:

• High Definition Sound Bar
• Remote Control with Battery
• Power Adapter w/Cable
• Stereo RCA to 3.5mm Audio Cable
• Optical Cable
• This Quick Start Guide

Controls & Connections

Front Panel Controls:

• Power: Press to turn the Sound Bar on or off.
• Input: Press to change the input source (e.g., Input 1, Input 2).
• Bluetooth: Press for direct access to Bluetooth input. Hold to pair a Bluetooth source.
• Volume +/-: Press to increase or decrease system volume.

Rear Panel Connections:

• Service Port: For use by service technicians only.
• Power Port: Connect the power adapter here.
• Optical Input (Toslink): Connect an optical audio cable.
• Input 1 (Stereo RCA): Connect analog audio sources via RCA cables.
• Sub Out (RCA): Connect an optional subwoofer.
• Input 2 (Stereo 3.5mm): Connect analog audio sources via a 3.5mm cable.

Display Panel

The Display Panel on the front of the Sound Bar features indicator lights that provide information about its functionality:

• Power Light: Indicates power status.
• DTS Light: Indicates DTS audio processing status.
• Input Lights: Indicate the currently selected input source.

First-Time Setup

1. Connect Audio Source: From the back of the Sound Bar, connect one of the included audio cables (Optical, Stereo RCA, or 3.5mm) to ONE TV audio output. For best results, use the Optical input. If using Optical, ensure your TV's audio output is set to PCM. Connect other devices (Blu-ray player, game system) using their respective manuals.
2. Connect Power Adapter: Connect the power adapter cable to the Sound Bar's Power Port.
3. Connect to Power: Plug the power adapter into a wall outlet.

Positioning: For the best surround sound experience, position the Sound Bar centered below the TV and close to ear level.

Operating the Sound Bar

1. Turn on your TV.
2. Press the Power button on the remote control or on the Sound Bar to turn it on.
3. Press the Input button on the remote or Sound Bar to switch between audio sources. Ensure the Sound Bar is set to the input connected to your TV (e.g., Input 1).

Setup is complete.

Using the Remote

• Power: Press to turn the Sound Bar on or off.
• Mute: Press to mute or unmute audio.
• Sub - / Sub +: Press to decrease or increase subwoofer volume (only when an aftermarket subwoofer is connected).
• Fast-Rewind/Back: Press and hold to fast rewind. Press to return to the previous track.
• Play/Pause: Press to play or pause audio.
• Input: Press to change the input source.
• Volume Up / Volume Down: Press to increase or decrease system volume.
• DTS: Press to activate DTS Sound.

For best results, point the remote at the right side of the Sound Bar, where the sensor is located.

Bluetooth Pairing

To pair your Sound Bar with a Bluetooth device:

1. Ensure your Bluetooth device is in discovery mode. Refer to your device's documentation for details.
2. Press and hold the Bluetooth button on the Sound Bar for five (5) seconds. The Sound Bar will enter Bluetooth Pairing Mode, and the indicator lights on the front panel will light sequentially from left to right and back again.
3. Once the device is paired, the indicator lights will stop flashing.
4. Play audio from your Bluetooth device. Volume can be controlled on both your source device and the Sound Bar.

Using Bluetooth Mode

Your Sound Bar supports music streaming from Bluetooth-enabled smartphones, tablets, and computers. Device compatibility may vary; consult your device's documentation. Once paired, your device should remain paired as long as it's within range, even if you change the input on the Sound Bar.

Your Sound Bar does not have a microphone and cannot operate as a hands-free device for a smartphone.

Maximizing Signal

A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity compared to a wired connection.

If your sound quality is less than optimal:

• If you hear any break-up or disconnect while streaming, move the source device closer to the Sound Bar.
• Ensure there are no solid obstructions in the line-of-sight between the Sound Bar and the source device.

Check the volume on your device and the Sound Bar before pressing Play. High volume levels can damage your hearing.

Changing the Input Source

You can connect up to 4 devices to your Sound Bar simultaneously. To switch between sources, press the Input button on the Sound Bar or remote until the desired source is selected. The indicator lights on the display panel will illuminate to show which input source has been selected:

• RCA: Indicator lights for Input 1.
• 3.5mm: Indicator lights for Input 2.
• Optical*: Indicator lights for Input 3.
• Bluetooth: Indicator lights for Bluetooth input.

*For the Optical Input to decode sound, the source output must be set to PCM. Refer to your source device's documentation for more information. If an incorrect source format is detected, the Input 3 (Optical) indicator lights will flash quickly.

Changing the Battery

1. Insert a flat-head screwdriver into the slot on the remote's battery cover. Gently push down on the tab and pull the cover downward to open.
2. Replace the old battery with a new CR2032 battery, ensuring the '+' sign is facing up.
3. Push the battery cover back into place until it clicks.

Connecting a Subwoofer

1. Connect Subwoofer: TURN BOTH SOUND BAR AND SUBWOOFER OFF. Connect an RCA cable from the Sub Out port on the back of the Sound Bar to your subwoofer. (Subwoofer not included).

The volume on your subwoofer must be manually adjusted. Refer to your subwoofer's user manual for proper operation details.

Wall Mounting the Sound Bar

1. Remove the screw from the Sound Bar stands and rotate them as shown.
2. Ensure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. If you are unfamiliar with power tools or electrical wiring in walls, consult a professional installer.
3. Reattach the stands using the included screw. The Sound Bar can be mounted with a total width of 26 3/4 inches (67.95 cm) between mounting points.

Help & Troubleshooting

VIZIO offers FREE lifetime technical support. Contact VIZIO Technical Support:

• Phone: (877) 698-4946 (TOLL-FREE)
• Email: TechSupport@VIZIO.com
• Web: www.VIZIO.com/support

Hours of operation: Monday - Friday: 5 AM to 9 PM (PST), Saturday - Sunday: 8 AM to 4 PM (PST)

Common Issues:

• There is no power: Press the POWER button on the remote or Sound Bar. Ensure the power cord is securely connected. Check that the power adapter light is glowing green. Plug a different device into the electrical outlet to verify it is working.
• There is no sound: Increase the volume. Press MUTE on the remote to ensure the Sound Bar is not muted. Press INPUT to select a different input source. If using Optical/SPDIF, ensure your TV's audio output is set to PCM. Check if your TV's audio output is set to FIXED or STANDARD, not VARIABLE. Consult your TV's manual. If using Bluetooth, ensure your source device volume is up and not muted.
• I hear buzzing or humming: Ensure all cables and wires are securely connected. Connect a different source device (TV, Blu-ray player) to see if the buzzing persists; if not, the issue may be with the original device. Connect your device to a different input on the Sound Bar.
• The remote isn't working: Replace the remote battery. Point the remote directly at the Sound Bar. Some remote buttons may not be supported by certain Bluetooth streaming applications (e.g., Back/Fast Rewind).
• The audio is distorted in Bluetooth mode: Move the source device closer to the Sound Bar (Bluetooth range is up to 30 feet). Move the source device away from other devices with wireless signals that might cause interference. Restart both your source device and the Sound Bar. Re-pair the source device with the Sound Bar.

One-Year Limited Warranty

VIZIO provides a one-year limited warranty on parts and labor for products purchased new in the United States and Puerto Rico, covering defects in materials and workmanship for non-commercial use (90 days for commercial use). VIZIO may repair or replace the product at its discretion. To obtain warranty service, contact VIZIO Technical Support. Pre-authorization is required before sending any product to a VIZIO service center. Proof of purchase is required.

Replacement parts and products may be new or recertified. They are warranted for the remaining portion of the original warranty or for 90 days from service, whichever is greater.

Limitations and Exclusions: This warranty does not cover cosmetic damage, normal wear and tear, improper operation, power surges, signal issues, shipping damage, acts of God, misuse, modifications, installation/setup issues, or repairs by unauthorized centers. Products with removed serial numbers or requiring routine maintenance are not covered. Products sold "AS IS" or "FACTORY RECERTIFIED" are excluded.

Implied warranties are limited to the duration of this express warranty. VIZIO's total liability shall not exceed the product's purchase price. VIZIO is not responsible for loss of use, data, commercial loss, lost revenue, or profits, or incidental/consequential damages. Some states may not allow limitations on implied warranty duration or exclusion of damages.

Specifications:

• Sound Bar: Two High-Efficiency Full-Range Transducers
• Inputs: 1 x 3.5mm Stereo Audio, 1 x RCA Stereo Audio, 1 x Optical (Toslink)
• Outputs: 1 x RCA Subwoofer Out
• Sound Pressure Level: 86 dB
• Frequency Response (Sound Bar): 90 Hz - 19.5 KHz
• Voltage: 100-240 VAC, 50-60 Hz
• Compliances: UL, FCC

Legal & Compliance

FCC Class B Radio Interference Statement: This equipment complies with FCC Part 15 limits for Class B digital devices, providing reasonable protection against harmful interference in residential installations. Operation is subject to two conditions: (1) the device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the user's authority to operate the equipment. Shielded cables must be used.

RF Exposure Information: This device meets government requirements for radio wave exposure and complies with FCC radiation exposure limits for an uncontrolled environment.

IC Statement: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to two conditions: (1) the device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and your body.

Disposal and Recycling: Dispose of this product properly according to local laws and regulations. Due to electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities for disposal and recycling options.

DTS Information: U.S. patents apply. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, and DTS Sound are trademarks of DTS, Inc.

VIZIO Recommends

The Ultimate Ultrabook™

The VIZIO Thin+Light Ultrabook offers uncompromising performance, premium picture, and audio quality in a remarkably thin profile. It is ultra-responsive and ultra-portable, booting up instantly and going wherever you do. Available at www.VIZIO.com. (Product sold separately).

VIZIO Co-Star™ Stream Player

The VIZIO Co-Star Stream Player merges live TV and streaming entertainment, turning any HDTV into a smart TV. With Google TV™, it offers apps, full-screen web browsing, and streaming entertainment. With 1080p Full HD, built-in Wi-Fi, and 3D-readiness, it's an ultimate entertainment upgrade for any high-definition television. Available at www.VIZIO.com. (Product sold separately).