MOZA R3 Racing Wheel and Pedals
User Manual
Introduction
This document provides a comprehensive user manual for the MOZA R3 Racing Wheel and Pedals, designed for compatibility with Xbox Series X|S, Xbox One, and PC.
Product Components
The MOZA R3 bundle includes the following main components:
- 01 R3 Wheel Base
- 02 ES Steering Wheel
- 03 SR-P Lite Racing Pedals
01 R3 Wheel Base
Connection Ports
The rear of the R3 Wheel Base features the following ports:
- USB: For PC connection and firmware updates.
- POWER: DC INPUT for power supply.
- PEDAL: Connects to the SR-P Lite pedal set.
- DASH: For connecting a dashboard display (if applicable).
- SHIFTER: For connecting a shifter accessory.
- E-STOP: Emergency Stop button connection.
- HANDBRAKE: For connecting a handbrake accessory.
Dimensions
Key dimensions of the R3 Wheel Base are provided for mounting and integration purposes.
Xbox Console Connection Guide
- Connect the SR-P Lite pedal set to the PEDAL port on the base.
- Plug the power cord into an electrical outlet.
- Plug the supplied USB cable into the corresponding ports on the base and the Xbox console.
- Turn on the base by pressing the power button located at the rear, then turn on the Xbox console.
Connection Confirmation: If the RPM light on the wheel flows from the side to the center, it indicates a successful connection to Xbox. If the RPM light is flashing, it means the base is in PC mode. To switch to Xbox mode, press and hold the S1 and S2 buttons on the steering wheel simultaneously for 3 seconds.
Pedal Recalibration: If you encounter pedal travel issues during initial use, two methods are available:
- Calibrating in PC Mode: Connect the device to a PC, enter PC mode, and recalibrate the pedal until it functions normally. Then switch back to Xbox mode for regular usage.
- Calibrating with MOZA Racing Mobile App: Download and install the MOZA RACING mobile app from your app store. Access the pedal calibration feature within the app.
[Note] By default, the mode is set to Xbox. To use it on PC, you need to switch the mode.
If your steering wheel is not centered, or the maximum rotation angle doesn't match in-game settings, adjust it using the MOZA Pit House software on your mobile app or PC.
PC Connection Guide
- Attach the base to your rig mount using either 2 or 4 screw holes on the bottom.
- Plug in the power supply and USB cable into their corresponding ports at the rear of the R3 base. Connect the USB cable to an available port on your PC.
- Briefly press the power button on the back of the R3 base to switch it on.
- Download the latest version of Moza Pit House from the help center on the Moza Racing website (www.mozaracing.com).
- For more information and instructional videos, visit www.mozaracing.com.
Desk Clamp Installation Guide
Attach the base to the desk clamp using the 4 mounting holes on the underside of the base. Tighten the clamp securely to the desk to prevent any movement during use.
More information and tutorial videos are available on the official website (www.mozaracing.com).
Precautions
- Do not expose the equipment to liquids and moisture to avoid fire/electric shock.
- Avoid using the equipment in direct sunlight.
- For your safety and well-being, monitor your gaming time and take breaks as needed.
- The device is not suitable for children under 6 years old; small accessories may cause a choking hazard.
- Children under 13 years old must be accompanied by their parents.
- Do not dismantle the equipment without the manufacturer's permission, as this will void your warranty.
- The equipment must be connected using the factory-supplied power supply to prevent electrical hazards.
- To ensure safety, repair or replacement of parts should only be carried out by an authorized repair center.
- The use of non-standard power supplies is prohibited, even if the voltage and other data match.
- Only use AC power supplied by a standard wall outlet to avoid damage to the product.
- Exposure of the equipment to heat sources is prohibited.
- Unplug the unit from the power cord and disconnect it if it is not to be used for a long period of time.
- If you observe any abnormalities, stop using it immediately and seek assistance from MOZA officials or the authorized center.
- Stay tuned to the MOZA website and public platforms for the latest product information.
[Important] This product is intended solely for use in simulated driving activities. It is important to distinguish between simulated games and real-life driving to ensure safety on the road.
Software Introduction
The MOZA Pit House software allows you to check the working status of your connected devices, adjust settings, and quickly start games. The steering wheel needs to be centered at 0°.
With click-and-go presets and fully customizable advanced tuning, everyone from beginners to pro drivers can find their perfect setup.
FFB Effect Equalizer
Customize force feedback in the FFB Effect Equalizer section to achieve the desired feel for every condition.
Firmware Updates
One-click updates for the MOZA Racing ecosystem ensure you enjoy the latest features with ease.
For more detailed instructions, please visit the MOZA website (www.mozaracing.com) and download the user manual from the help center.
Bluetooth Connection
Connect wirelessly using the MOZA RACING App:
- Download the MOZA RACING App from the App Store and open it. Tap on "Connect to the device" to begin searching for your device SN code.
- Once your device is found based on the SN code, click on "Connect."
- Click on "Enter the car" to access the settings page.
- On the settings page, you can configure and adjust parameters for both the base and steering wheel.
Specifications
- Supported Platforms: Xbox Series X|S, Xbox One, Windows 10/11
- Drive Type: Direct Drive
- Max Wheel Rotation: 2000°
- Housing Material: Aviation-grade Aluminum Alloy
- Housing Color: Black
- Peak Torque: 3.9 N·m
- Input Voltage: 100V~240V AC ->12V DC
- USB Refresh Rate: 1000Hz
- APP Function: Supported
- Connection Ports: Power, USB, Dash, Pedals, Emergency Stop, Shifter, and Handbrake
- Accessories: User manual, warranty card, power supply, data cable, and tool kit.
- Fixing Method: Bottom mount with 2/4 holes
- Upgradable Firmware: Supported
02 ES Steering Wheel
Xbox Console Buttons
The ES Steering Wheel features the following buttons:
- Left Side: LT, LB, S1, D-pad, LSB, RADIO, View
- Right Side: RT, RB, S2, XYAB, RSB, XBOX, Menu
- Center: Share
Mode Switching
To switch between Xbox mode and PC mode, press and hold the S1 and S2 buttons simultaneously for more than 3 seconds. The RPM light will flash at high frequency when the mode has switched. A steady flow from side to center indicates Xbox connection; flashing indicates PC mode.
[Note] The LSB and RSB buttons on the Xbox console's steering wheel function only in specific games.
A list of compatible Xbox Series X|S and Xbox One games is available at www.mozaracing.com.
QR Use Guide (Quick Release)
- Align the 6 ball bearings on the wheel QR with the 6 notches on the base QR mount.
- Press the quick release onto the base mount, ensuring the bearings and notches are aligned.
- The quick release will automatically lock into place. If it does not, recheck alignment and try again.
- To remove the wheel, squeeze the black quick release part with the MOZA logo towards the wheel with both hands and pull out the wheel simultaneously.
Steering Wheel Configuration
The ES steering wheel can be configured easily in the MOZA Pit House software:
- RPM indicator switch mode: Choose between in-game RPM, off, and constant modes.
- Indicator modes: Two modes (Mode 1 and Mode 2) are available for detailed configuration.
- RPM indicator timing: Select early, normal, late, or custom timing to match in-game RPM.
- Brightness: Adjust the brightness of the RPM/shift LEDs.
For detailed steering wheel settings and functions, visit the Moza Racing official website.
Specifications
- Wheel Rim Material: Aluminum Alloy
- Shifter Paddle Material: Aluminum Alloy
- Size: 280mm
- Buttons: 22
- High Brightness LEDs: 10 Pcs
- Intelligent Telemetry: Supported
- RPM LEDs Fully Adjustable: Supported via MOZA Pit House
- Release Method: Quick Release
03 SR-P Lite Racing Pedals
Pedal Installation Guide
- Mount the pedal on the footrest and adjust the mounting holes. Fix the M4*10 screws using a 2.5mm hexagonal spanner. It is recommended to fit all 4 screws for each pedal to ensure stability.
- Connect the connecting cable to the corresponding mounting connector. Use the cable clip under the pedal base to keep cabling tidy.
The pedals feature distinct ports: Throttle port, Wheelbase port, and Clutch port.
Connecting to Wheel Base
- Connect one end of the RJ45 cable to the Wheel Base port and the other end to the Pedal port on the base.
- The working status of the pedal can be monitored in MOZA Pit House. If the unit appears grey or unresponsive, unplug the base, close MOZA Pit House, reconnect the base, and reopen Moza Pit House.
- In addition to recalibrating the pedal, you can adjust the starting point, ending point, and travel distance to suit your preferences within MOZA Pit House.
Pedal Spacing Adjustment Instructions
Move the pedals left and right to adjust the distance between them and the base holes. Align the holes and tighten the screws. This adjustment method applies to the throttle, brake, and clutch pedals.
Instructions for Adjusting the Height of the Pedal Plate
Use a 2.5mm hexagonal spanner to turn the screws counter-clockwise on the face of the pedal plate. Use a 7mm open-end spanner to remove the back nut from the plate screws. Move the plate up and down to adjust the height as needed, then tighten the nuts and screws. This adjustment method is the same for the throttle, brake, and clutch pedals.
Specifications
- Pedal Material: High Strength Steel
- Pedal Plate Material: High Strength Steel
- Color: Black
- Sensing Method: Hall Sensor
- Pedal Spacing: Adjustable
- Pedal Plate Height: Adjustable
- Pedal Travel Software Adjustment: Supported
- Pedal Travel Reversal Function: Supported
- Pedal Output Curve: Supported
- Anti-slip Pedal Pad: Supported
04 Packing List
The R3 Racing Wheel and Pedals bundle includes:
- R3 DD Base
- ES Steering Wheel
- SR-P Lite Racing Pedals
- 15 Degree Desk Clamp
- Power Adapter
- Power Cord
- Wire Harness x2
- Screws (multiple sizes)
- Spanners (multiple sizes)
- Nuts
- Cable Clip
- Anti-slip Silicon Pad x2
- M6 Flat Pad x4
- Moza Logo Stickers
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
IC Caution
Radio Standards Specification RSS-Gen, issue 5. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
