MOZA R5 Racing Simulator

R5 Direct Drive Wheel Base

The MOZA R5 Direct Drive Wheel Base offers a powerful and immersive racing simulation experience. It features a 5.5 N·m Peak Torque, a Servo Direct Drive System, and is constructed with Aviation-grade Aluminum Alloy for durability and performance. The system boasts ultra-low torque ripple and cogging, an intelligent temperature control system, 15-bit resolution, and compatibility with MOZA Pit House Control Center Software and the MOZA App for cloud control.

Product Features:

• 5.5 N·m Peak Torque
• Servo Direct Drive System
• Aviation-grade Aluminum Alloy construction
• Ultra-low Torque Ripple and Cogging
• Intelligent Temperature Control System
• 15-bit Resolution
• MOZA Pit House Control Center Software compatible
• MOZA App Cloud Control

Wheelbase Interface:

The R5 Base features a USB-B port for computer connection, a Pedal interface, a Dash interface, a DC Input for power, and a Power Switch.

Basic Parameters:

• Dimensions: 40.0mm (height), 173.9mm (length), 124.0mm (width), 156.8mm (depth)
• Screw hole size: R2.5mm

ES Steering Wheel

The ES Steering Wheel is designed for comfort and control, featuring high-grade leather and stitching, an aluminum alloy frame, and MOZA Racing's custom quick-release system. It includes aluminum alloy shifter paddles, 22 configurable keys, and MOZA Flow Shift Color Indicator Lighting.

Product Description:

• High-grade Leather and Stitching
• Aluminum Alloy Frame
• MOZA Racing Custom Quick Release
• Aluminum Alloy Shifter Paddles
• 22 Configurable Keys
• MOZA Flow Shift Color Indicator Lighting

Quick Release Instructions:

1. Align the 6 steel balls on the steering wheel with the 6 grooves on the wheelbase.
2. Press the wheel into the wheelbase, keeping the balls aligned.
3. The quick release will automatically snap into place. If it doesn't lock, try rotating the panel on the base to its default position and try again.
4. To remove the wheel, pull back on the outer ring (black) and pull the wheel out simultaneously.

Wheel Configuration:

Using the MOZA Pit House software, users can configure various settings for the ES steering wheel, including Joystick Mode (buttons or keys), Indicator Light Switch (off, on, or speed-specific settings), Indicator Light Display Mode (two modes available), Speed Adjustment for the shift indicator light, and Brightness Adjustment for the shift indicator.

Product Parameters:

• Wheel Material: Microfiber Leather
• Frame Material: Aluminum Alloy
• Shifter Material: Aluminum Alloy
• Size: 11 Inches
• Buttons: 22 (Configurable)
• LED Count (Strip): 10 LEDs
• Smart Telemetry: Supported
• MOZA Pit House Light Configuration: Supported
• Quick Release: Supported

SR-P Lite Racing Pedals

The SR-P Lite Racing Pedals are constructed from high-strength steel and utilize high-precision Hall sensors for accurate input. They offer adjustable pedal spacing, detachable pedals, and software-adjustable pedal input.

Product Description:

• High-strength Steel Pedals
• High Precision Hall Sensor
• Compatible with a variety of setups
• Adjustable Pedal Spacing
• Detachable Pedals
• Pedal Input Adjustable (Software)

Pedal Installation Process:

1. Install the pedals onto the included footrest using the mounting holes and M4*10 screws. It is recommended to use all four screws for stability.
2. Connect the pedal wires to the corresponding interface, using the wire clip under the pedal base to secure the wires.
3. Open the MOZA Pit House software to check the status of each pedal. If a device is not recognized, unplug the base, close the software, restart the PC, reconnect the base, and reopen the software.
4. Pedal input (start, end point, stroke detail) can be adjusted within the MOZA Pit House suite.

Pedal Spacing Adjustment:

To adjust pedal spacing, select the relevant screw holes, loosen the pedal, move it to the desired position, and tighten the screws. This process is the same for the throttle, brake, and clutch pedals.

Plate Height Adjustment:

To adjust the plate height, use a 2.5 mm hexagon wrench to loosen screws and a 7 mm open-end wrench to remove the back nut and board screw. Move the board up or down to the desired height, then re-secure the nut and screw. This method applies to the throttle, brake, and clutch pedals.

Product Parameters:

• Pedal Material: High-strength Steel
• Panel Material: High-strength Steel
• Color: Black
• Throttle Sensor: Hall Sensor
• Pedal Spacing: Adjustable
• Pedal Height: Adjustable
• Pedal Input Adjustment: Software Supported
• Pedal Reversable Function: Supported
• Pedal Output Curve Adjustment: Software Supported
• Anti-slip Pedal Bottom: Included

Installation Guide

Base Installation:

1. Fix the base to the bracket using the 2-4 screw holes on the bottom of the base.
2. Connect the Type-B end of the USB cable and the power cable to the corresponding ports on the rear of the R5 base.
3. Short press the power button on the rear of the R5 base to power it on.
4. Download and install the latest MOZA Pit House Software Suite from www.mozaracing.com.
5. For installation videos and further information, visit www.mozaracing.com.

Desk Clamp Installation Guide:

Align the four screw holes on the bottom of the base with the mounting holes on the desk clamp. Secure it with 4 screws. Tighten the knobs on the desk clamp to the desktop, ensuring they are firmly secured to prevent loosening during intense driving.

Software Introduction: MOZA Pit House

MOZA Pit House is the central software solution for the MOZA ecosystem, allowing users to monitor connected devices and perform extensive configurations. Users can adjust the base angle, force feedback, pedal settings, HUD settings, and game settings. The software also facilitates quick launching of detected games.

Key Features:

• Preset Modes: Offers presets for beginners and advanced configurations for professional users.
• FFB Effect Equalizer: Allows for detailed adjustments to road feel and surface feedback through the steering wheel.
• One-Click Update: Enables fast and seamless upgrades for the entire MOZA ecosystem.

For detailed software instructions, visit the MOZA Racing website (www.mozaracing.com) help center.

Precautions

• Avoid exposing the unit to rain or water to prevent fire or electric shock.
• Do not expose the unit to direct sunlight for extended periods.
• Limit usage to a maximum of 2 hours per day for average users to avoid potential health risks.
• The R5 is not suitable for children under 6 years old due to small parts that may present a choking hazard.
• Children under 13 should be supervised by a guardian when using the R5.
• Do not disassemble the device without MOZA's permission, as this will void the warranty.
• Use only the provided power supply and connect to a safe electronic power supply.
• For repairs or replacements, contact MOZA directly or an authorized repair center.
• Do not use non-standard power supplies.
• Use only AC power from a standard wall outlet.
• Do not expose the device to heat sources.
• If the R5 will not be used for an extended period, unplug the device.
• If any abnormality is found, stop using the device immediately and contact MOZA or an authorized dealer/center.
• Follow MOZA's official website or social media for the latest product information.

Important Note: This product is designed for simulation purposes. Please distinguish between simulation and reality and drive safely.

Packing List

• R5 Direct Drive Wheelbase
• ES Racing Steering Wheel
• SR-P Lite Racing Pedals
• 15 Degree Desktop Mount

Product Warranty Card

Product Model: [Model Number Placeholder]

Purchase Date: [Date Placeholder]

User Name: [Name Placeholder]

User Phone: [Phone Placeholder]

Product Barcode: [Barcode Placeholder]

Mailing Address: [Address Placeholder]

Warranty Policy:

The wheelbase, steering wheel, pedals, and dashboard display are covered by a 12-month warranty from the date of purchase. The device casing, manual, cables, screws, wrenches, packaging, etc., are not included in the free warranty service but are available for paid service. Free warranty service is void under the following conditions:

1. Exceeding the warranty period.
2. Lack of warranty certificate and valid invoice, unless proof of purchase within the warranty period is provided.
3. The model number on the warranty certificate does not match the product model or has been altered.
4. Damage caused by disassembly by unauthorized personnel.
5. Damage caused by force majeure (e.g., natural disasters).
6. Damage caused by failure to use, maintain, or service the product according to the user manual.

Warranty periods may vary based on product components, different countries, and legal regulations. For specific warranty periods in your region, please consult the official MOZA website or your authorized MOZA dealer.