Parkside 2 Ah Battery PAP 20 B1 & Charger PLG 20 A4

Introduction

Congratulations on the purchase of your new Parkside appliance. This operating manual is part of the product and contains important information regarding safety, usage, and disposal. Please familiarize yourself with all operating and safety instructions before using the product. Use the product only as described and for the specified applications. Pass these instructions on to any future owner.

Intended Use

This charger is exclusively intended for charging Parkside batteries of the PAP 20 A1/A2/A3/B1/B3 series. The appliance is not intended for commercial use. Any other usage or modification is considered improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damages attributable to misuse.

Features

• 1 Battery pack
• 2 High-speed charger
• 3 Red charge control LED
• 4 Green charge control LED
• 5 Battery charge level button
• 6 Battery display LED

Package Contents

• 1 x 2 Ah battery
• 1 x Quick charger
• 1 x Operating manual

Technical Data

2 Ah Battery PAP 20 B1

Charger PLG 20 A4

General Power Tool Safety Warnings

WARNING! Read all safety warnings and instructions. Failure to follow warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

Use and handling of the cordless electrical power tool:

• Charge a rechargeable battery unit using only the charger recommended by the manufacturer. Using other types of chargers may cause fire.
• Only use the supplied rechargeable battery units with an electrical power tool. Using other batteries may lead to injury or fire.
• When not in use, store battery units away from metal objects like paper clips, coins, keys, nails, or screws that could bridge the contacts. Short-circuiting can cause heat damage or fire.
• If misused, fluids may leak from battery units. Avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek medical help if fluid gets into eyes. Escaping fluid may cause skin irritation or burns.

CAUTION! RISK OF EXPLOSION! Never charge non-rechargeable batteries. Protect the rechargeable battery from heat (sunlight, fire, water, moisture) as there is a risk of explosion.

Extended safety guidelines:

• Do not use a damaged or modified battery. Damaged batteries may behave unexpectedly, causing fires, explosions, or injury.
• Do not expose a battery to fire or excessive temperatures. Temperatures over 130°C (265°F) can cause an explosion.
• Follow all charging instructions and never charge the battery or tool outside the specified temperature range. Incorrect charging can destroy the battery and increase fire risk.

Safety guidelines for battery chargers

This appliance may be used by children aged 8 years and above and persons with limited physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or have been instructed on safe use and potential risks. Do not allow children to use the appliance as a toy. Cleaning and user maintenance should not be carried out by children without supervision.

To avoid risks, damaged mains cables must be replaced by the manufacturer, their customer service department, or a similarly qualified person.

The charger is suitable for indoor use only.

WARNING! To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their customer service department, or a similarly qualified person.

ATTENTION! This charger can only charge the following batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3/PAP 20 B1/PAP 20 B3. An updated list of battery compatibility can be found at www.lidl.de/akku.

Before use

Charging the battery pack (see fig. A)

CAUTION! Always unplug the appliance before removing or connecting the battery pack to the charger.

NOTE Never charge the battery pack if the ambient temperature is below 10°C or above 40°C. For long-term storage of a lithium-ion battery, check the charge level regularly. The optimum charge level is between 50% and 80%. The storage climate should be cool and dry, with an ambient temperature between 0°C and 50°C.

• Connect the battery pack 1 to the high-speed battery charger 2 (see fig. A).
• Insert the power plug into the socket. The control LED 3 lights up red.
• The green control LED 4 indicates that the charging process is complete and the battery pack 1 is ready.

CAUTION!

• If the red control LED 3 flashes, the battery pack 1 has overheated and cannot be charged.
• If the red and green control LEDs 34 both flash, the battery pack 1 is broken.

• Push the battery pack 1 into the appliance.
• Switch off the charger for at least 15 minutes between successive charging sessions. Disconnect the power plug from the mains power socket.

Checking the battery charge level

Press the battery charge level button 5 to check the status of the battery (see also main diagram). The status/remaining charge is shown on the battery display LED 6 as follows:

• RED/ORANGE/GREEN = maximum charge
• RED/ORANGE = medium charge
• RED = low charge - charge the battery

Maintenance and storage

• If you do not intend to use the appliance for an extended period, remove the batteries and store it in a clean, dry place away from direct sunlight.
• For long-term storage of a lithium-ion battery, check the charge level regularly. The optimum charge level is between 50% and 80%. The optimum storage environment is cool and dry.
• Never attempt to repair damaged batteries. Battery maintenance should only be carried out by the manufacturer or an approved customer service center.

Kompernass Handels GmbH Warranty

Dear Customer, This appliance has a 3-year warranty valid from the date of purchase. Your statutory rights as a buyer are not restricted by this warranty.

Warranty conditions

The warranty period starts on the date of purchase. Keep your receipt as proof of purchase.

If a material or manufacturing fault occurs within three years of purchase, Parkside will repair or replace the product, or refund the purchase price at their discretion. This service requires presenting the defective appliance and proof of purchase (receipt) along with a brief written description of the fault and when it occurred, within the warranty period.

If the defect is covered by the warranty, the product will be repaired or replaced. Repair or replacement does not start a new warranty period.

X 12 V and X 20 V Team Series battery packs come with a 3-year warranty from the date of purchase.

Warranty period and statutory claims for defects

The warranty period is not extended by repairs or component replacements. Any damage or defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after the warranty period expires will be subject to a fee.

Scope of the warranty

The appliance is manufactured according to strict quality guidelines and inspected before delivery. The warranty covers material or production faults. It does not cover parts subject to normal wear and tear, fragile parts (e.g., switches, glass), or damage due to improper use, maintenance, or unauthorized repairs. The product is intended for private use only. The warranty is void in cases of misuse, improper handling, force, or modifications/repairs not performed by authorized service centers.

The warranty does not apply to:

• Normal reduction of battery capacity over time
• Commercial use of the product
• Damage or alteration of the product by the customer
• Non-compliance with safety and maintenance instructions, operating errors
• Damage caused by natural hazards

Warranty claim procedure

For quick processing, please observe the following:

• Have your receipt and item number (e.g., IAN 123456) ready as proof of purchase. The item number is on the product's type plate, engraving, the front page of the manual, or a sticker on the product.
• For functional errors or other defects, contact the service department by telephone or e-mail.
• You can return a defective product postage-free to the provided service address. Enclose proof of purchase, a description of the defect, and when it occurred.

Download manuals, product videos, and software at www.lidl-service.com. The QR code links directly to the Lidl service page where you can access instructions using the item number (IAN) 351747_2007.

Service

Service Great Britain: Tel.: 0800 404 7657, E-Mail: kompernass@lidl.co.uk

Service Ireland: Tel.: 1890 930 034, E-Mail: kompernass@lidl.ie

Service Cyprus: Tel.: 8009 4409, E-Mail: kompernass@lidl.com.cy

Importer: KOMPERNASS HANDELS GMBH, BURGSTRASSE 21, 44867 BOCHUM, GERMANY, www.kompernass.com

Disposal

The packaging protects the product during transport and is made of recyclable materials selected for environmental friendliness. Returning packaging conserves resources and reduces waste. Dispose of packaging materials according to local regulations.

Do not dispose of power tools in your normal domestic waste! According to European Directive 2012/19/EU, worn-out power tools must be collected separately and recycled in an environmentally compatible manner.

Do not dispose of batteries in your normal household waste! Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Take the battery pack and/or tool to a nearby collection facility. Consult local authorities for disposal information.

Notes on the EC Declaration of Conformity

This appliance complies with the basic requirements and other relevant provisions of the Electromagnetic Compatibility Directive 2014/30/EU and the Low-Voltage Directive 2014/35/EU. The complete original Declaration of Conformity is available from the importer.

CE RoHS Directive (2011/65/EU)*

* The manufacturer is solely responsible for the conformity declaration. The described object complies with Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Ordering a replacement battery

To order a replacement battery, visit www.kompernass.com or call the provided telephone numbers. Due to limited stock, items may sell out quickly.

NOTE Online ordering of replacement parts may not be available in all countries. Contact the service hotline in such cases.

Telephone ordering:

• GB Service Great Britain: Tel.: 0800 404 7657
• IE Service Ireland: Tel.: 1890 930 034
• CY Service Cyprus: Tel.: 8009 4409

For faster processing, have the article number (e.g., IAN 351747) ready. The article number can be found on the type plate or the title page of these instructions.