Jandy Drop-In Replacement Guide

Jandy VS Pumps

Why Jandy®?

Jandy equipment offers superior performance and efficiency, designed for easy installation on most pool pads and compatibility with existing setups.

Protecting Your Bottom Line

Jandy equipment is exclusively available through authorized channels, not online, ensuring support and value for partners.

Drops In with Ease

Jandy equipment is engineered for straightforward replacement of most existing pool pad equipment with minimal plumbing adjustments. It represents a valuable upgrade, not just a simple swap.

Built to Last

Our equipment is designed for durability, ensuring reliable performance over the long term.

Support You Can Count On

Jandy provides superior customer service and dedicated training teams to assist when needed.

Why Jandy® VS FloPro™ is the First Choice When Replacing a Pump

The Right Dimensions

Jandy VS FloPro pumps feature an adjustable base to ensure proper alignment with existing plumbing, facilitating replacement of Pentair® or Hayward® pumps.

Small for Service

At just 24.5 inches long, Jandy VS FloPro pumps require less space on the equipment pad and during transport.

Everything You Need

VS FloPro pumps include 2-inch unionized fittings or 2-inch internal threads. Unionized fittings are recommended for precise adjustments and easier future maintenance.

The Power Play

Jandy Dual Voltage Series VS FloPro pumps feature autosensing technology, allowing them to operate on either 115V or 230V without rewiring.

Jandy VS FloPro™ Dual-Voltage, 2-AUX Relay Pump Models

Standout Features

• 1.85 And 2.7 HP Models
• SpeedSet VS Controller Preinstalled
• 2" Unionized Fittings + 2" Internal Threads
• 115V/230V Autosensing Operation
• Two Programmable Auxiliary Relays
• 4-Speed Dry Contact Relay Control
• Zero-Clearance TEFC Motor Design

Pump Curves

VS FloPro™ 1.85 HP Pump Curves: Displays Total Dynamic Head (Feet of Water) versus Flow Rate (Gallons Per Minute) at various RPMs (600, 1200, 1730, 2400, 2750, 3000, 3450 RPM).

VS FloPro 2.7 HP Pump Curves: Displays Total Dynamic Head (Feet of Water) versus Flow Rate (Gallons Per Minute) at various RPMs (600, 1200, 1730, 2400, 2750, 3000, 3450 RPM), including a curve for 115 VAC.

Specifications

Using the Adjustable Base with Spacers

The small base with spacers is used when replacing Pentair® WhisperFlo, IntelliFlo VSF, or Sta-Rite® Dyna-Glas pumps. It involves using a cutting tool to remove spacers from the base and then inserting pins into designated holes.

Pump Replacement Compatibility

No Base Required: Hayward® Super Pump®, Pentair® SuperFlo®, Sta-Rite® SuperMax®

Small Base: Hayward Super II®, Jandy® PlusHP, Jandy Max® HP

Small Base with Spacers: Pentair WhisperFlo®, Pentair IntelliFlo VSF®, Sta-Rite Dyna-Glas®

Small Base + Large Base*: Sta-Rite® Max-E-Pro®, Sta-Rite Dura-Glas®, Sta-Rite Dura-Glas II®, Sta-Rite Max-E-Glas®

*Large Base R-kit part number R0546400 is sold separately. Small base with spacers is included with every VS FloPro pump.

Dimension Comparison: VS FloPro and WhisperFlo

Visual comparison showing Jandy® VS FloPro™ with Small Base + Spacers (Dimensions: 9 1/2" width, 8 7/8" height, 11 5/8" length) against Pentair® WhisperFlo® (Dimensions: 9 3/4" width, 11 5/8" height, 11 5/8" length).

Dimension Comparison: VS FloPro and Super Pump

Visual comparison showing Jandy® VS FloPro™ (Dimensions: 9 1/2" width, 7 3/4" height, 10 1/2" length) against Hayward® Super Pump® (Dimensions: 9 1/4" width, 10 1/2" height, 10 1/2" length).

Pentair® WhisperFlo® Pump Models and Recommended VS FloPro™ Replacement Models

Hayward® Super Pump® Models and Recommended VS FloPro™ Replacement Models

Super Pump Model (Single-Speed)

Super Pump Model (2-Speed)

Most Super Pump models utilize 1.5" threaded ports. Use 2" to 1.5" slip reducers to utilize the Jandy 2" unionized fittings for perfect micro adjustments on existing plumbing.

Jandy Gas Heaters

Why Jandy®?

Jandy equipment offers superior performance and efficiency, designed for easy installation on most pool pads and compatibility with existing setups.

Protecting Your Bottom Line

Jandy equipment is exclusively available through authorized channels, not online, ensuring support and value for partners.

Drops In with Ease

Jandy equipment is engineered for straightforward replacement of existing pool pad equipment with minimal plumbing adjustments. It represents a valuable upgrade, not just a simple swap.

Built to Last

Our equipment is designed for durability, ensuring reliable performance over the long term.

Support You Can Count On

Jandy provides superior customer service and dedicated training teams to assist when needed.

Why JXi™ is the First Choice When Replacing a Heater

Best Retrofit Option

The 3-port header facilitates easy plumbing and drop-in replacement of Pentair® MasterTemp® heaters. (Heater shown with Optional VersaFlo Integrated Bypass, not available with ASME® Compliant Models).

Flexible Installation

The top can be easily removed and rotated 180 degrees for increased accessibility, eliminating the need to rotate headers.

Easy to Service

Features a flip-up electrical panel for convenient setup and service.

Keeps Critters Out

The JXi is constructed with a fully encased shell to protect against rodent intrusion and damage.

Suggested Tools

• Pipe Wrench
• Channel Locks
• Phillips Screwdriver
• PVC Pipe Cutter
• Multimeter
• Monometer
• Impact Drill with Proper Bit
• Wire Cutter/Strippers

NOTE: Fluidra equipment must be installed and serviced by qualified or licensed pool professionals. Please see the installation manual for complete step-by-step instructions.

Installation Note: Cut plumbing as close as possible near the union buttress.

Installation Step: Install cap and attach plumbing with included Jandy® unions.

MasterTemp to JXi™ Comparisons

Polymer Header - Copper Tubes

*If the current gas supply can handle the extra gas volume a JXi 400 can be used.

ASME Compliant Bronze Header - Copper Tubes

Polymer Header - CuproNickel Tubes

ASME Compliant Bronze Header - CuproNickel Tubes

JXi™ Parts

JANDY® JXi™ DIMENSIONS

Inlet Side: 26.5 inches (height), 22.1 inches (width).

Front View: 24.9 inches (height), 21.6 inches (width). Inlet connection is 5.1 inches from the side, 10.1 inches from the top, and 5.6 inches from the bottom.

NOTE: Dimensions are identical on all JXi heater models.

PENTAIR® MASTERTEMP DIMENSIONS

Inlet Side: 28.15 inches (height), 23.02 inches (width).

Front View: 28.15 inches (height), 21 inches (width). Inlet connection is 5.1 inches from the side, 10.1 inches from the top, and 5.6 inches from the bottom.

Why Jandy® JXi™ is the Best Gas Heater

VersaFlo™ Integrated Bypass Technology: The JXi with VersaFlo is the first and only swimming pool heater that automatically directs water flow through the heat exchanger when heat is needed, and around it when heating is not required, saving on filtration pump electricity costs. VersaFlo Integrated bypass can be factory-installed or added on-site.

Bypass Mode: VersaFlo integrated bypass diverts water flow around the heat exchanger when not heating.

Heat Mode: When a call for heat is detected, water is automatically directed through the heat exchanger.

Fluidra ServicePro Rewards Program

With The Right Tools, You Won't Leave Money On The Table

Fluidra's ServicePro Rewards Program is designed for pool service companies, offering access to marketing services, software, training, and consumer incentives to help grow businesses.

Sign Up Now and Unlock Over $5,000 in Value Including:

• $50 Sign-Up Bonus
• 5% Off First $5K
• $200 Off Your First 5 VS Pump Purchases
• $200 Off Your First 5 Automation Purchases
• Plus Many More Exclusive Benefits

Sign up today at FluidraRewards.com/Sign-Up.