RESIONE EC51 Fast ABS-Like Resin: Instruction Manual & Properties

The Product Description

LITLIQ EC51 is a standard rigid resin offering ultra-fast printing and supporting layer heights up to 0.2mm. With conventional printers and modes, models up to 40mm in height can be printed in less than an hour. EC51 facilitates a release process with low film removal force and provides good fault tolerance, effectively reducing potential printing failures. It is therefore the preferred material for novice users.

Material Properties Data

Property	Method	Data
Viscosity (25℃)	ASTM:D4212-10	568 mPa·s
Shore Hardness	ASTM:D2240-05	88-93D
Tensile Strength	ASTM: D638-14	42-54 MPa
Flexural Strength	ASTM: D790-10	59-62 MPa
Flexural Modulus	ASTM: D790-10	1.8-2.2 GPa
Notched IZOD	ASTM:D256-10	10.31 J/m
Elongation at Break	ASTM: D638-14	8-11%

Printing

You can download the resin printing parameters from RESIONE's official website. The detailed operations are as follows: RESIONE's official website → Support → Settings.

Cleaning and Post-curing

Cleaning

You can use ethanol (concentration ≥95%) or IPA to clean prints. The cleaning and soaking time shall not exceed 10 minutes. After cleaning, use compressed air to dry the prints.

Post-curing

If you use a post-curing box with a power of 40W, our recommended post-curing time is about 15 minutes. The post-curing time shall be appropriately adjusted according to the power of the post-curing box.

The cleaning and post-curing process involves several steps: starting with a bottle of resin, wearing protective gloves, cleaning the print in a vat, using a spray nozzle (likely for air drying or applying cleaning agent), a UV curing lamp, and finally a 3D printer.

Attentions

If the post-curing irradiation time is too long, it will lead to the warping of the prints, and they will become hardened and fragile.
Resin prints will be fragile after post-curing. It is not recommended to apply force to the prints immediately. Wait for a while until the internal stress of the prints is completely released.

Support and Community

For more questions, please contact support@godsaid3d.com.

Join the RESIONE community on Facebook: RESIONE Facebook Group.

Find more resources at: RESIONE Linktree.

	RESIONE EC51 Fast ABS-Like Resin Instructions Detailed instructions for using RESIONE EC51 Fast ABS-Like Resin, including product description, material properties, printing guidelines, and cleaning/post-curing procedures.
	RESIONE G217 Clear Tough Resin Instructions Comprehensive instructions for using RESIONE G217 Clear Tough Resin, covering product description, material properties, printing, cleaning, post-curing, polishing, and storage.
	RESIONE TH72 Resin: Instructions for Use and Properties Comprehensive guide to RESIONE TH72 3D printer resin, detailing its properties, printing support settings, cleaning, and post-curing procedures for optimal results.
	RESIONE M58/M68/K Tough Resin Instruction Manual Comprehensive instruction manual for RESIONE M58, M68, and K tough 3D printing resins, detailing product descriptions, material properties, printing settings, cleaning and post-curing procedures, applications, and storage guidelines.
	RESIONE F Series Flexible Resin: Instruction Manual & Properties Comprehensive guide to RESIONE's F Series Flexible Resins (F39, F39T, F80, F69), covering product descriptions, material properties, printing settings, cleaning, post-curing, and usage tips for optimal 3D printing results.
	W90B Water-Washable Resin Instructions and Properties Comprehensive guide to RESIONE W90B water-washable 3D printer resin, covering product description, material properties, printing settings, cleaning, post-curing, and storage.
	RESIONE D01 & D01S Dental Model Resin: Instructions and Properties Guide to RESIONE D01 and D01S dental model resins, detailing product features, material properties, printing, cleaning, and post-curing for high-precision dental applications.
	RESIONE C01 Dental Castable Resin Instruction Manual Comprehensive guide to RESIONE C01 Dental Castable Resin, detailing its properties, 3D printing, cleaning, and investment casting procedures for dental prosthetics like crowns and bridges. Includes material specifications, step-by-step casting instructions, and burnout process. Ideal for dental laboratories.

RESIONE EC51 Fast ABS-Like Resin Instruction