Imperial Ported Enclosure Design
Project: TITLE BLOCKS
Sheet Title: IMPERIAL
Drawing File: A3(IMP).DWG
Drawn By: ROD STOCKLEY
Date: 2009-09-11
Institution: College of the North Atlantic, Architectural Engineering Technology
Sheet: A-02, SHEET 2 OF 2
Enclosure Dimensions and Views
This document presents technical drawings and specifications for an enclosure, likely for audio applications.
Top View
The top view illustrates the enclosure's layout from above:
- Overall Length: 40 inches
- Internal Slot Length: 34 inches
- Internal Chamber Width: 8 15/16 inches
- Overall Depth: 12 5/16 inches
- Internal Structure Details:
- Offset from side: 4 1/16 inches
- Offset from top edge of internal slot: 5 1/4 inches
- Internal slot defined by 2 1/4 inch offsets from front and back edges.
Front View
The front view displays the enclosure's front face:
- Overall Length: 40 inches
- Overall Height: 12 inches
- A circular port opening is visible on this face.
- A horizontal measurement of 27 3/16 inches is indicated across the lower section of the front view.
Port Tuning Specifications
The following parameters relate to the enclosure's port tuning:
- Port Length: 67.3 inches
- Port Area: 23.63 square inches
- Tuning Frequency (Fb): 26 Hz
- Box Volume (Vb): 1.32 Cubic Feet (Ft^3)
Important Notes
Note: 1. DO NOT SCALE THIS DRAWING
