Samsung WDH210S User Manual

Introduction

The WDH210S is a 2.4GHz-only Wi-Fi module designed for ultra-low power applications. It supports IEEE802.11 b/g/n standards and is intended for use in Samsung A/V Products.

Main Chipset Information

The module utilizes the Renesas DA16200 chipset for IEEE802.11 b/g/n connectivity.

Product Details

• Modulation: DSSS (DBPSK, DQPSK, CCK) for 802.11b; OFDM (BPSK, QPSK, 16QAM, 64QAM) for 802.11 g, n.
• Frequency Range: 2400-2483.5 MHz.
• Features: Supports IEEE 802.11 b/g/n, 1x1, 20MHz Channel Bandwidth. Includes built-in LNA, PA, and T/R switch. Supports various Wi-Fi security protocols including WPA/WPA2-Enterprise/Personal, WPA2 SI, WPA3 SAE, OWE, and multiple EAP methods.

Regulatory Compliance

This module complies with FCC Part 15 rules and is designed for integration into products by OEM integrators. It also meets Canadian IC standards. Specific conditions for operation, labeling, and RF exposure are detailed, including a minimum separation distance of 20cm.

For detailed compliance information, refer to the full FCC and IC statements within the document.

Operational Notes

• The module is intended for standalone mobile RF exposure use.
• The host product must have an integral, non-removable antenna.
• Operation is restricted for control or communications with unmanned aircraft systems.
• The module cannot be installed in a weatherized enclosure and requires connection to a power source as it does not have a battery.