Blooma Varennes Outdoor Wall Light

Important Safety Information

Please read these instructions carefully before installation and keep them for future reference.

• All installations must be carried out by a competent person in accordance with electrical regulations (NF C 15 100).
• Ensure all parts listed are present.
• Remove the product from its packaging.
• Choose an appropriate location for your product.
• ATTENTION: IP44 rating is guaranteed only when the product is correctly installed and sealed.
• Avoid installing the product in corrosive environments.
• Refer to the installation diagram.
• The product must be securely fixed to the mounting surface using the provided screws and wall plugs. The supplied wall plugs and screws are for solid walls only. For other wall types, use appropriate fixings.
• When drilling, ensure no pipes or electrical cables are damaged.
• IMPORTANT: The chosen fixing points must be able to support the total weight of the lamp.
• It is recommended to connect this product to an external wall switch to disable the motion detection function if necessary.
• Wiring diagram is for reference only. Always refer to the terminal block for wiring. Ensure all electrical connections are firm and no loose wire length remains outside the connection.
• Do not place or hang any object on this product.
• Never use power cables to support the product's weight.
• If the product does not light up after installation:
• Ensure there is no power outage.
• Ensure all connections are made correctly.
• If in doubt about mounting or using this product, consult a professional electrician.
• Always disconnect the product from the mains for at least 10 minutes before any maintenance or adjustment operation to ensure it has cooled down.
• Regular cleaning and maintenance are recommended to maintain the surface finish.

Product Characteristics

• Power Supply Voltage: 220-240 V~, 50 Hz
• Bulb Type: 1 x Max. 60 W, E27 (check bulb dimensions against available space beforehand)
• CE Marking: Conforms to all requirements of European directives.
• IP Rating: IP44 - Protected against splashing water from all directions.
• Electrical Class: Class I product, must be earthed.
• Disposal: Used electrical products should not be disposed of with household waste. Please use designated collection facilities. Contact local authorities or retailer for recycling information.

Warranty Conditions

Blooma offers a 2-year warranty against manufacturing defects for this product, starting from the date of purchase, for normal, non-professional domestic use. Proof of purchase (receipt or invoice) is required. The warranty covers product failures and malfunctions provided the product is used as intended and installed/maintained according to best practices and manual instructions. It excludes natural wear and tear, weather damage, flooding, heat, frost, water quality issues (limescale, corrosion), foreign bodies in water, lack of ventilation, improper use, negligence, accidents, or defective maintenance. Use of non-original or unsuitable accessories/spare parts, disassembly, or modification also voids the warranty. The warranty is limited to defective parts and does not cover associated costs (travel, labour) or indirect damages. In addition to this commercial warranty, the seller is bound by the legal guarantee of conformity and hidden defects as per applicable civil codes.

Manufacturer and Distributors

Manufacturer: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom.

Distributors include:

• UK: B&Q plc, SFD Limited
• France: Castorama France, BRICO DÉPÔT
• Poland: Castorama Polska Sp. z o.o.
• Germany: Screwfix Direct Limited
• Russia: ООО "Касторама РУС"
• Romania: SC Bricostore România SA
• Spain: Euro Depot España, S.A.U.
• Portugal: Brico Depot Portugal SA
• Turkey: KOÇTAŞ YAPI MARKETLERİ TİC. A.Ş.

The product is compliant with Eurasian Customs Union technical regulations.

Installation Guide

Parts Included:

• [01] x 1 (Main fixture body)
• [02] x 1 (Glass shade)
• [03] x 2 (Screws for top cover)
• [A] x 2 (Wall plugs)
• [B] x 2 (Mounting screws)

Tools Required: Drill with Ø6 mm bit, Screwdriver.

Step 1: Prepare Mounting

Unpack all components. Identify parts [01], [02], [03], [A], and [B]. Ensure the main fixture body [01] is oriented correctly (indicated by 'UP' markings).

Step 2: Drill and Insert Wall Plugs

Drill holes in the wall at the desired location using a Ø6 mm drill bit. Insert wall plugs [A] into the holes.

Step 3: Attach Mounting Bracket

Secure the mounting bracket (part of [01]) to the wall using screws [A]. Ensure the bracket is firmly attached.

Step 4: Wiring

Connect the wires from the mains supply to the fixture's terminal block. Typically, L (Live) connects to Brown or Red wire, N (Neutral) to Blue or Black wire, and Earth to Green/Yellow wire. Ensure all connections are secure.

Step 5: Secure Fixture Body

Attach the main fixture body [01] to the mounting bracket using screws [B].

Step 6: Install Glass Shade

Carefully place the glass shade [02] onto the fixture.

Step 7: Attach Lantern Body

Mount the main lantern body to the previously installed bracket.

Step 8: Secure Glass Shade

Ensure the glass shade [02] is properly seated and secured.

Step 9: Install Bulb and Top Cover

Screw in a compatible bulb [03] (Max 60W, E27). Then, attach the top cover of the fixture and secure it with screws [03]. The fixture may have an integrated motion sensor and switch; ensure the switch is set to 'ON' (Wł/Ein/Вкл/Pornit/ON/Encendido/Ligados/Açık) for operation.

Usage and Settings

This outdoor light features a motion sensor. Adjustments can be made for:

• Lux (Light Sensitivity): Adjusts the light level at which the motion sensor activates. A sun icon typically represents daylight activation, while a moon icon represents dusk/night activation.
• Timer: Sets how long the light stays on after motion is detected. Options may include short durations (e.g., 5 seconds) or longer periods (e.g., 5 minutes).

Motion Detection Range:

• The sensor has a detection height of approximately 2.2 meters.
• It covers a detection angle of 120 degrees.
• The maximum detection distance is up to 12 meters.

Maintenance

Bulb Replacement

Ensure the power is switched OFF at the mains. Allow the bulb to cool down. Unscrew the old bulb and screw in a new one of the correct type and wattage (Max 60W, E27).

Cleaning

Regularly clean the fixture with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish. Do not use excessive water or allow water to enter the electrical components.