Product Overview
The SmallRig Top Handle with Cold Shoe (Lite) 3764 is designed to facilitate low-angle shots and reduce strain on the user's arms. Its ergonomic handle features an anti-slip and anti-freeze silicone grip, providing comfort and a secure hold. The handle weighs only 129g due to its hollowed-out structure. It is equipped with three front cold shoe mounts and two rear cold shoe mounts, allowing for simultaneous attachment of accessories such as microphones, LED lights, and monitors. The handle also includes ARRI 3/8"-16 locating holes, compatible with accessories like Monitor Mount 2903 and 2348 for attaching monitors. Additionally, it features 1/4"-20 threaded holes that support accessories like Magic Arm 2070 for monitors and Remote Control 2924 for recording. An integrated Allen Wrench aids in tightening the locking screw, simplifying assembly and disassembly.
Safety Guidelines
1. Environment
Do not use the product underwater, in extreme temperatures (e.g., freezing or direct heat), corrosive environments, or areas with excessive dust. Dry metal parts immediately after contact with liquid to prevent corrosion.
2. Load Capacity
Do not exceed the maximum weight capacity indicated on the product. Overloading may risk structural failure, deformation, or accidental drops.
3. Cleaning & Maintenance
Clean surfaces with a dry, soft cloth. Avoid using chemicals such as alcohol or solvents. Ensure dry and ventilated conditions for long-term storage.
4. Structural Integrity
Do not modify the product (e.g., by drilling or cutting), as this compromises structural integrity and increases the risk of drops.
5. Malfunctions
Stop use immediately if you notice deformation, unusual noises, or loose components, and contact support.
In the Box
- Top Handle × 1
- Guarantee Card × 1
- Allen Wrench × 1
Product Details
Key Features
The handle features:
- 3 front cold shoe mounts and 2 rear cold shoe mounts for attaching accessories like microphones, LED lights, and monitors.
- ARRI 3/8"-16 locating holes for compatible accessories such as Monitor Mount 2903 and 2348.
- 1/4"-20 threaded holes for accessories like Magic Arm 2070 and Remote Control 2924.
- Ergonomic, anti-slip, and anti-freeze silicone grip for comfort.
- Hollowed-out structure for reduced weight (129g).
- An integrated Allen Wrench for easy assembly and disassembly.
Visual Description: The product is a black, lightweight camera top handle with a textured grip. It features multiple mounting points, including several cold shoe slots along the top and sides, and threaded holes. An Allen wrench is shown fitting into a locking mechanism.
Visual Description: A diagram illustrates the handle's all-in-one structure with multiple mounting points, highlighting the cold shoe mounts, ARRI locating holes, and 1/4"-20 threaded holes. Another image shows the handle mounted on a camera rig with a monitor and microphone attached.
Visual Description: Images demonstrate the ease of use, including attaching a cold shoe adapter, using the included Allen wrench to tighten a screw, close-ups of the cold shoe mounts, and the silicone grip. A camera setup is shown with the handle, monitor mount, and microphone.
Visual Description: A camera setup is illustrated featuring the SmallRig handle, a video light, microphone, L-bracket, and mini tripod. Another image shows the handle attached to a camera body.
Visual Description: The handle is shown mounted on a camera, and a separate image depicts a hand holding the handle for low-angle shooting, highlighting its ergonomic design for this purpose.
Visual Description: A diagram provides the product's physical dimensions, indicating a length of 135mm, a width of 24.5mm, and a height of 72mm.
Visual Description: This page displays various compliance marks and logos, including RoHS, CE, recycling symbols, French and Spanish recycling instructions, a Chinese inspection certificate, and the 'Made in China' label.
Specifications
- Product Dimensions: 5.3 × 0.9 × 2.8 inches / 135 × 24.5 × 72 mm
- Package Dimensions: 6.1 × 3.2 × 1.6 inches / 156 × 83 × 43 mm
- Net Weight: 4.6 ± 0.2 oz / 129.0 ± 5.0 g
- Package Weight: 6.4 ± 0.2 oz / 182.0 ± 5.0 g
- Material: Aluminum Alloy, Silicone, Stainless Steel
- Maximum load capacity: 176.4 oz / 5 kg
- Compatibility: Universal cold/hot shoe mount
Manufacturer Information
Manufacturer Email: support@smallrig.com
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Consignor: Shenzhen LC Co., Ltd.
Address: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Certifications and Compliance:
- RoHS Compliant
- CE Marked
- Recycling symbols indicating proper disposal.
- French recycling instructions: "LE TRI FACILE" (Easy Sorting), "Séparez les éléments avant de trier" (Separate elements before sorting), with icons for sorting waste.
- Spanish recycling instruction: "RECICLA Al Azul" (Recycle to Blue).
- Chinese certification: "合格证已检验" (Certificate of Inspection).
- "Made in China"
