Daikin BRC944B2-A08 Wired Remote Controller Kit
Submittal Data Sheet
Project Name: [Not Specified]
Location: [Not Specified]
Engineer: [Not Specified]
Submitted to: [Not Specified]
Submitted by: [Not Specified]
Reference: [Not Specified]
Approval: [Not Specified]
Date: [Not Specified]
Construction: [Not Specified]
Unit #: [Not Specified]
Drawing #: [Not Specified]
Model Compatibility
Compatible with Single-Zone and Multi-Zone indoor unit models:
CDXS, CTXS, FDXS, FTK_N, FTK_A, FTX_N, FTX_A, FTX_U, FTXG*, FTXR, FTXS, FVXS
Note: The Sarara drying function of the QUATERNITY units is not supported with the BRC944.
The following indoor units do not have the S21 connection and require an additional interface adaptor (ordered separately) to provide the S21 connector for the One+ communication:
- FTX09NMVJU, FTX12NMVJU, FTK09NMVJU, FTK12NMVJU
- FTX15NMVJU, FTX18NMVJU, FTX24NMVJU, FTK18NMVJU, FTK24NMVJU
Required Interface Adaptor
- KRP067A41E
- KRP980B2E
Specifications
| Specification | Detail |
|---|---|
| Model | BRC944B2-A08 |
| Description | Wired Remote Controller Kit¹ |
| Maximum Indoor Units | 1 |
| Dimensions | 4.75 in x 4.75 in x 0.69 in (120mm x 120mm x 17.5 mm) |
| Communication Protocol | S21 |
| Comfort Setpoint Range | 64°F - 90°F Set Point Range |
| Operation | Start / Stop, Mode (Auto/Heat/Cool/Dry), Set Temperature Setpoint, Fan Speed, Airflow Direction, One-time Timer, Daily Timer |
| Scheduling | Daily Timer |
¹The Wired Remote Controller kit includes a Wired Remote Controller (BRC944B2) and a wired remote controller cable (BRCW901A08).
Product Image
The product image displays the Daikin BRC944B2 wired remote controller, featuring a digital screen showing temperature (74°F) and time (88:88), along with operational status indicators. Control buttons include ON/OFF, UP, DOWN, SET, TIMER, FAN, MODE, and SWING. Below the controller image is a depiction of the Daikin BRCW901A08 wired remote controller cable.
Features
- Selectable auto / cool / heat / dry operation modes with adjustable setpoint and fan speed.
- Set temperature setpoint in °F or °C units with 1 degree increments.
- Temperature is controlled through the indoor unit temperature sensor.
- Built-in one-time or daily timer functionality with up to 2 timer actions per day.
- Approximately two-hour battery backup.
- Can be used together with the factory supplied standard wireless remote controller.
- Additional or replacement wired remote controller cables can be ordered:
- BRCW901A03: Non-plenum rated, 10ft
- BRCW901A08: Non-plenum rated, 26ft
- DACA-BRCW901P10: Plenum rated, 10ft
- DACA-BRCW901P25: Plenum rated, 25ft
Dimensions
The controller features a square faceplate. The overall dimensions are approximately 4-3/4 inches by 4-3/4 inches. Detailed measurements for mounting and cable routing include: 1-1/2 inches, 1-5/8 inches, 3-5/16 inches, 11/16 inches, 7/8 inches, 1-1/8 inches, and 1-13/16 inches. A "CORD OUTLET HOLE" is present.
Documentation
Further documentation is available on the following Daikin websites:
Specific documents include:
- Submittal
- Installation Manual
- Operation Manual
Manufacturer Information
DAIKIN COMFORT TECHNOLOGIES NORTH AMERICA, INC.
19001 Kermier Road | Waller, TX, 77484
Document Revision: Rev. 1022
Daikin's products are subject to continuous improvements. Daikin reserves the right to modify product design, specifications and information in this data sheet without notice and without incurring any obligations.
Daikin - Commercial and Residential Indoor Comfort Systems
Daikin City
