Eachine EX5 Drone - Instruction Manual

Important Statement and Safety Guidelines

Thank you for choosing this product. This manual provides guidance for operating the Eachine EX5 drone. Please read it carefully and keep it for future reference.

Important Statement: This product is not a toy. It integrates advanced mechanics, electronics, and aerodynamics. It requires proper assembly and operation to avoid accidents. Improper handling can cause serious personal injury or property damage. This product is suitable for individuals aged 14 and above with prior drone operating experience. For questions, contact your local dealer. The seller and manufacturer are not responsible for injury or damage due to improper use.

Safety Precautions:

• Hazard Warning: Contains small parts. ⚠️ Choking hazard: Not for children under 3 years.
• Dangerous Commodity: Stay away from crowds while flying. Improper assembly, damage, poor electronic control, or unfamiliar operation can lead to accidents. Pilots are responsible for negligence.
• Obstacles and People: Keep away from high-rise buildings, power lines, and crowds. Avoid flying in windy, rainy, or lightning weather. Maintain a distance of 1-2 meters from people during operation and landing.
• Humid Environment: Keep the drone dry. Sophisticated electronic and mechanical components can be damaged by moisture. Clean surface stains with a clean rag.
• Experienced Pilot Guidance: Early learning stages can be difficult. Avoid flying alone and seek guidance from experienced individuals.
• Correct Use: Repair the drone with original parts. Operate within product capabilities and legal limits.
• Safe Operation: Fly only when in good condition and with flying skills. Fatigue or improper operation increases risks. Do not use near ears to avoid hearing damage.
• Rotating Parts: Keep motors away from pilots, crowds, and objects when rotating at high speed to prevent injury and damage.
• Heat: Keep the drone away from heat sources, direct sunlight, and high temperatures to prevent deformation.
• Environmental Disposal: Dispose of the product according to local laws and regulations to prevent environmental pollution.

Product Description

Package Includes:

• EX5 drone x 1
• Blades x 2
• Screwdriver x 1
• USB charging cable x 1
• Remote control x 1
• Battery x 1

Basic Parameters:

• Wheelbase: 230mm
• Fuselage height: 52mm
• Fuselage weight: approx. 225g
• Battery: 7.4V 2200mAh 25C
• Charging time: approx. 4 hours
• Flight time: 25-30 minutes

Compliance: This device complies with Part CE-RED and Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of any interference received.

Manufacturing: Made in China.

Product Assembly

Blade Installation / Demolition

Installation: Install blade A on arm A, and blade B on arm B. Use the screwdriver to unscrew and remove the old blade, then replace it with a new one. Secure the screw.

Demolition: Turn the screw counterclockwise to remove the blade.

Tips:

• Install accessories in the correct order. Ensure correct blade direction for rotation. Tighten screws carefully.
• Improper blade installation will prevent takeoff.
• Be careful of accidental scratches from thin blades.
• Use only original blades. Blades are consumable and can be purchased separately.

Charge the Drone Battery

Pull the battery from the drone. Plug the USB into a charger and insert the battery into the USB output terminal. The red light on the battery stays on, and the green light flashes during charging. Both lights stay on when charging is complete (approx. 240 minutes).

Diagram: Shows USB charging cable connecting to a battery, with an optional adapter.

Warnings:

• Do not charge the battery on carpet to avoid fire.
• The manufacturer is not responsible for injury or damage caused by improper charging.
• Insert the plug correctly; do not insert in reverse.
• Recommended adapter: 5V 1-2A. Avoid charging from computer USB ports.

Installation of Drone Battery

Push the battery into the drone's battery slot until it is securely clamped. Ensure the cover is fully buckled. Check that the battery is properly seated.

Warnings:

• Improper or loose battery installation may cause the drone to lose power and fall.
• Keep batteries away from children during charging; adult supervision is required. Keep away from flammable materials and do not leave unattended.
• Do not short-circuit or squeeze the battery.
• Do not place the battery in high-temperature areas.
• Use only the recommended charger. Keep battery and charger dry.
• Disconnect battery and charger before cleaning. Periodically check charger wires, plugs, and housing. Stop using if damaged until repaired.
• The charger is not a toy and is for indoor use only.
• Recharge the battery before storing. If unused for over 3 months, recharge it at least once to prevent over-discharge and permanent damage.

Introduction of Drone Fuselage

Diagram: Shows the main parts of the drone:

• Blade ⚙️
• Switch ?️
• Drone shell
• Camera ?
• Drone bottom
• Drone arm

Controller Function Introduction

Diagram: Illustrates the remote control layout with labeled functions:

• Take picture ?
• Record video ?
• Surround mode ?
• Geomagnetic calibration ?
• Speed adjustment ⚡
• Compass calibration ?
• Throttle joystick ?️
• Camera up ⬆️
• Camera down ⬇️
• Switch ?️
• Remote control power Indicator ?
• One key return ↩️
• Direction joystick ?️
• Headless mode ?
• One key take-off ✈️
• Power Switch ⚡

Install the Remote Control Battery

Remove the battery cover. Install 4 AAA batteries (not included) according to polarity markings. Replace the cover.

Notes:

• Remote control uses 4 "AAA" non-rechargeable or rechargeable batteries (not included).
• Pay attention to battery polarity.
• Do not mix battery types or conditions.
• Remove and dispose of used batteries properly.
• Remove batteries if not using for a long time to prevent leakage.

Synchronize the Drone with the Remote Control

Step 1: Insert the battery into the drone. Press and hold the drone's power button for two seconds to turn it on. The indicator light flashes quickly, then slowly. Place the drone on a horizontal surface.

Step 2: Turn on the remote control. The indicator lights on both the remote and drone will become solid, indicating successful synchronization.

Tips: Long-press the speed control button and turn on the remote control simultaneously to switch joysticks (left joystick becomes direction, right becomes throttle - right-hand mode).

Notes:

• Once synchronized, re-synchronization is not needed unless the drone or controller is changed.
• Ensure only one remote controller and drone are powered on simultaneously during synchronization to avoid failure.

Drone Initialization Detection & Calibration

Initialization Detection

After synchronization, the drone performs an 8-second initialization detection on a horizontal surface.

Gyro Calibration

After successful synchronization and initialization, keep the drone on a level surface. Push both joysticks 45° to the lower right corner simultaneously. The drone's front and back indicators will flash quickly, indicating calibration. The lights will turn solid upon completion.

Notes:

• Perform gyro calibration on a level surface for balanced flight.
• Perform gyro calibration before each takeoff.

Compass Calibration

After synchronization, initialization, and gyro calibration, compass calibration can begin. This is mandatory before each takeoff for normal flight.

Step 1: Horizontal Calibration: Press the compass calibration button. Spin the drone counterclockwise horizontally about 3 times until the remote control beeps and the rear indicator light stays on.

Step 2: Vertical Calibration: Erect the drone. Rotate the fuselage clockwise about 3 times until the remote control beeps and the rear indicator light stays on.

Notes:

• Calibrate at least 1 meter above the ground.
• Avoid areas with strong magnetic fields (e.g., magnetite, parking lots, power towers).
• Do not carry ferromagnetic materials (keys, phones) during calibration. Avoid calibration near bulk metal.

Search Satellite Signals

After compass calibration, place the drone on flat ground. It will automatically search for satellite signals. The rear indicator light will change from slow flashing to steady, and the remote control will beep upon completion.

Unlock and Takeoff

Push the left joystick to 45° left and the right joystick to 45° right simultaneously. The motors will spin. Push the throttle stick up to take off.

Tips: Ensure the drone flies in an open space and the app shows more than 7 satellite stars before takeoff.

Mobile Device Integration

Recommended Mobile Device Models and Configurations

iOS System:

• Recommended: iPhone 6 and newer
• Best: iPhone 7 and newer
• OS Version: iOS 8.0 and newer (Best: iOS 9.0 and newer)

Android System:

• Recommended CPU: Snapdragon 630, Samsung Exynos 7420, Helio X25, Kirin 950 and newer
• Best CPU: Snapdragon 835, Samsung Exynos 8895, Helio 970, Kirin 970 and newer
• OS Version: Android 5.0 and newer (Best: Android 8.0 and newer)
• RAM: 3GB and above (Best: 6GB and above)
• CPU Usage: 25% and below (Best: 10% and below)

Application Installation Instructions

Step 1: Download App: Scan the provided QR code (? QR code) to download the EACHINE PRO app.

Step 2: Connect Drone:

• Turn on the drone.
• Go to your mobile device's WLAN settings. Search for the WiFi name: WiFi-5G4K-GPS-EX5-XXXXXX.
• Connect your mobile device to the drone via WiFi.
• Launch the EACHINE PRO app.

Warning: Your mobile phone's Wi-Fi must support IEEE 802.11a/b/g/n/ac (5G band WLAN).

Tips: Only one mobile device can connect to a drone via WiFi at a time.

Optical Flow Positioning Notes

The optical flow positioning function may be less effective in certain environments, leading to unstable hovering or drifting:

• On water
• Dim light
• Large gaps between high and low surfaces
• Smooth reflective ground
• Two-tone stripes

Mode Switching:

• Indoors (no satellite signal): Drone uses optical flow positioning.
• Outdoors (with satellite signal): Drone uses GPS mode.

Application Interface Introduction

Diagram: Shows the main app interface elements:

• Return ↩️
• Altitude / Distance ⬆️/↔️
• GPS Signal ?️
• Flight speed ⚡
• Vertical speed ⬆️
• Horizontal speed ↔️
• Drone power ?
• Wifi signal ?
• Settings ⚙️
• Flight mode switching ✈️
• Virtual joystick switch ?️
• One key return ↩️
• Take off / Landing ✈️ / ⬇️
• 3D VR Mode ?️
• Media gallery ?️
• 50x zoom ?
• Map preview switch ?️
• Switch camera ?
• Take photo ?
• Record video ?
• Camera up ⬆️
• Camera down ⬇️

Flight Recording Interface

Records drone flight parameters. You can switch to a map view to check the drone's last recorded position.

Recorded Data: Flight record, Date ?, Flight time ⏱️, Maximum flight distance ↔️, Maximum flight altitude ⬆️, Maximum lifting speed ⬆️, Maximum speed ⚡.

Gesture Recognition

Face the front camera. Gestures can trigger automatic photos or videos.

• ? Yeah Gesture: Make a "Yeah" gesture with one hand about 2 meters in front of the camera. The drone will count down 3 seconds and take a photo.
• ✋ Palm Gesture: Make a fist with your palm facing the camera about 2 meters away. The drone will start recording video. Making the gesture again will stop recording (minimum 3 seconds between recognitions).

Tips for Recognition Rate:

• Aim at the lens.
• Fly in well-lit environments.
• Perform gestures about 2 meters from the lens.

Factors Decreasing Recognition:

• Weak light or backlight.
• Weak or interfered WiFi signal.

Flight Modes

The drone supports 4 flight modes:

1. Self-stability mode: Drone hovers and maintains stable flight; controlled by joystick.
2. Waypoint mode: Fly along a user-defined route by setting waypoints.
3. Follow me mode: In GPS mode outdoors, the drone follows the mobile device's coordinates. Indoors, it recognizes and follows a person.
4. Surround mode: The drone circles around the remote control.

Waypoint Mode Details

Set waypoints by drawing lines on the map. You can set waypoint parameters like height, residence time, and speed.

Diagram: Shows waypoint menu and parameter setting interface.

Operations: Set waypoints, delete single or all waypoints, send route to drone. Pressing Self-stabilizing mode exits Waypoint mode.

MV Interface

Access the MV Interface from the main screen (tap icon in the upper left corner). Here you can record videos and add background music.

Diagram: Shows MV interface with options for Filter ?, Music select ?, Rotate the picture ?, Take photo ?, Record video ?.

Filter Interface

Choose from 9 filters: Nature, Grayscale, Color, Beautify, Color Fade, Invert.

Music Selection Interface

Tap the music icon to select background music for your video. Music list is available for selection.

Settings

Controller Modes: Mode 1 (throttle right), Mode 2 (throttle left).

Calibration: Accelerometer calibrate (Gyro calibration), Magnetometer calibrate (Compass Calibration).

Waypoint/Orbit Mode: Drone will automatically ascend to a default height. Do not set altitude too high.

Warning: Factory parameters are pre-set. Modifying them is generally not recommended.

Basic Flight

Flight Steps

1. Synchronize remote control and drone. Drone initializes automatically.
2. Perform Gyro Calibration.
3. Download the APP and pair the drone via WiFi.
4. Perform Compass Calibration.
5. Wait for satellite signals (app shows >7 stars, drone rear light steady).
6. Unlock drone and push throttle stick up to take off. Control via APP.

Pre-Flight Inspection

• Ensure remote control and drone batteries are fully charged.
• Ensure blades are installed correctly.
• Ensure motors function correctly.
• Confirm successful compass calibration.
• Ensure GPS signal is >7 stars.

Flight Control

Remote Control Functions:

• Drone Rise/Decline: Use throttle joystick.
• Go ahead/Back: Use direction joystick.
• Front/Back: Drone moves forward/backward.
• Spin Clockwise/Counterclockwise: Drone rotates.
• Turn left/right: Drone turns.

Flight Modes

• One key take off ✈️: After unlocking, press the button. Drone takes off and hovers at approx. 1.5 meters.
• Surround mode ?: Drone flies 20m+ high. Press the surround button. Drone turns north. Push direction joystick left for counterclockwise circle, right for clockwise. Adjust circle radius by pushing joystick up (expand) or down (reduce). Press surround button again to exit. Drone accelerates up to 2.5m/s. Max radius approx. 20m, min radius approx. 5m.
• Headless Mode ?: Drone should be 5m high. Press the headless mode button. Rear indicator flashes quickly, remote beeps. Press again to exit.
• Return ↩️: The drone has return functions (One-key return, Out of control return, Low power return). The starting point is recorded when GPS signal strength is >7 stars for the first time.

Return Functions Details

• One-key return ↩️: Press the button. Drone returns to the starting point. User can control the drone with the joystick to avoid obstacles during return. Press the button again to exit automatic flight and regain control.
• Out of control return: If the remote control signal is lost for >6 seconds (and GPS >7 stars, compass working), the drone automatically returns to the starting point. Signal restoration allows user control via the one-key return button.
• Low power return: When drone voltage is low (rear indicator flashes slowly, remote beeps continuously), the drone automatically returns if flying higher than 20m or farther than 20m. It will land and lock at the starting point if GPS signal is lost.

Precautions for Return:

• Drone cannot dodge obstacles during automatic return.
• Return functions require good GPS signal.
• If GPS signal is poor or lost, and remote signal is lost, the drone will descend, land, and lock.
• Low Power Return Note: The remote control cannot cancel a low power return.

Take Photo / Record Video

Adjust camera angle using the camera up/down buttons. Pressing the camera button takes a photo (remote beeps, app shows "KA"). Long-press the video button to start recording (remote beeps twice). Long-press again to stop.

Diagram: Shows camera up ⬆️, camera down ⬇️, Record video ?, and Take picture ? buttons.

Troubleshooting ?️