Aeration Systems & Decorative Fountain Displays | Kasco Marine
Instruction Manual for Kasco models including: J-Series Fountains Premium Nozzles, J-Series, Fountains Premium Nozzles, Premium Nozzles, Nozzles
Kasco Premium Nozzles for J-Series Fountains - Webb's Water Gardens
Kasco Madrone Premium Fountain Nozzle — Everblue Pond
File Info : application/pdf, 2 Pages, 975.75KB
DocumentDocumentINSTALLATION INSTRUCTIONS FOR PREMIUM NOZZLES Large J Series Fountains After removing the current nozzle and ensuring that the nozzle O-ring (A) is properly seated in its groove, twist the nozzle clockwise (as viewed from the top) so that the flanges in the nozzle lock into place on the top of the pump chamber by hand. Twist until the nozzle flanges can move no further and are completely snug. Nozzles can be changed conveniently without removing the float or using any tools. If it is difficult to twist the nozzle into place, dielectric grease can be applied to the nozzle O-ring. For easy installation, use the provided tool. Snap it onto the nozzle ridges as close to the base as possible. Leave the tool in place for future nozzle changes. Fern nozzle does not require tool. Simply twist and lock into place. Twist until snug A This kit includes a retaining clip which you can install to prevent possible rotation of the nozzle when the fountain is running. See instructions on the opposite side of this sheet. DOCUMENT # 884801 800 Deere Rd. Prescott, WI 54021 | 715.262.4488 | sales@kascomarine.com | kascomarine.com RETAINING CLIP INSTALLATION INSTRUCTIONS Position the clip with this side up if the nozzle ring is metal. Position the clip with this side up if the nozzle ring is plastic. 1. Insert the clip into one of the aligned gaps 1 in the nozzle and ring. 2. Twist the bottom of the clip over the ring. 3. Snap the clip into place. 2 3 Snap! DOCUMENT # 884801 800 Deere Rd. Prescott, WI 54021 | 715.262.4488 | sales@kascomarine.com | kascomarine.com