SP-0766 Stitch Elvis Dancing Water Speaker Instruction Manual

Introduction

Thank you for purchasing the Elvis Stitch Dancing Water Speaker. This manual provides more information about this product. Please read the instructions before using.

© Disney. Elvis Presley™ © 2025 ABG EPE IP LLC. Visit www.disney.com.

Product Overview

The speaker features a design inspired by Stitch and Elvis Presley. The front of the device displays the speaker grille and the character, along with the following controls:

• 1. Previous Song / Volume down Button
• 2. Next Song / Volume Up Button
• 3. On/Off/Play / Pause Button
• 4. FM/BT/ FM Scan Button
• 5. LED Indicator
• 6. USB Type-C Port

The back of the device houses the USB Type-C port for power input (DC 5V).

Package Contents

• 1 x Elvis Stitch Dancing Water Speaker
• 1 x USB Type-C Power Cable (19.7in. / 50cm)
• 1 x Instruction Manual

Specifications

Note: The water effect is created using environmentally-friendly precision oil, not actual water.

CAUTION: Use only the included USB Type-C Power Cable with this product.

Operation

Powering On/Off

Connect the speaker to a 5V/1A USB adapter (not included) using the supplied USB Type-C Power Cable. Slide the ON/OFF switch to the "ON" position.

• Power On: Press and hold the Power Button for 3 seconds.
• Power Off: Press and hold the Power Button for 3 seconds.

Note: Always power off the speaker when not in use.

LED & Water Fountain Function

• Turn On: Press the Power Button twice.
• Turn Off: Press the Power Button twice.

Pairing with Mobile Device

1. Ensure the speaker and mobile device are within 32.8 feet (10 meters).
2. Power on the speaker.
3. Activate Bluetooth on your mobile device and select "SP-0766 SPK" from the list.
4. A beep sound confirms successful pairing.

Reconnecting to Mobile Device

When powered on, the speaker will automatically connect to the last successfully paired device.

Bluetooth Speaker Mode Controls

• Play/Pause: Short press the Power Button once.
• Next Track: Short press the > Button.
• Previous Track: Short press the < Button.
• Volume Up: Long press the > Button.
• Volume Down: Long press the < Button.

FM Radio Mode Controls

Note: Plug in the USB Type-C cable to act as an FM antenna before switching to FM Radio Mode.

• Switch to FM Radio Mode: Short press the "M" Button.
• Switch back to Bluetooth Mode: Short press the "M" Button again.
• Auto Scan: Long press the "M" Button.
• Next Channel: Short press the > Button.
• Previous Channel: Short press the < Button.
• Volume Up: Long press the > Button.
• Volume Down: Long press the < Button.
• Mute/Unmute: Short press the Power Button.

Frequently Asked Questions (FAQ)

If the Wireless speaker cannot be paired with your device:

• Ensure the speaker is in pairing or reconnection mode.
• Ensure the Bluetooth search function on your mobile device is activated.

If the Wireless speaker cannot be powered on:

• Ensure the power adapter is connected securely and the outlet is working.

Safety Instructions

• Input voltage: DC 5V 1A.
• For safe and reliable operation, use only certified appropriate chargers/adapters.
• Switch off the product after use.
• The manufacturer is not responsible for damage or injury resulting from improper operation, such as using voltages higher than 5V.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Product Information

FCC ID: 2ADM5-SP-0766V2

Item#: SP-0766-STITCH

Distributed by: 1616 Holdings, Inc.

Address: 701 Market Street, Suite 200, Philadelphia, PA 19106

Keep all relevant information for future reference.