Putting the Smart Bulb in Pairing Mode
- Screw the smart bulb into a standard E26 bulb socket and then turn on the power.
- With the smart bulb on, quickly turn the power OFF/ON three times, leaving it ON the fourth time.
- The light from the smart bulb should pulse a few times, indicating it is now in pairing mode.
Adding the smart bulb to your network: In the STITCH by Monoprice app, tap "+", then "Others", then "Smart Bulb". Follow the on-screen instructions.
Thank You for Your Purchase!
Please read these instructions carefully before installation. For the complete User's Manual, visit www.monoprice.com and input the Part Number of the product in the search field to download the manual from the product page.
Download & Install the App
Download and install the "STITCH by Monoprice" app from Google Play™ or the App Store, or scan the appropriate QR code below.
[QR Code for Google Play]
[Google Play Button]
[QR Code for App Store]
[App Store Button]
Adding Devices
Tap "+" to Add Devices and then select your product from the list. Make sure your STITCH device is powered on and that its indicator light is flashing rapidly before proceeding to add the device. If it is not flashing rapidly, press and hold the device's reset button for 5-6 seconds to reset.
Proceed with the in-app installation and pairing, then tap "Done" once completed.
Set your STITCH device into place and you're all set!
Description of App Screenshots: The screenshots display the STITCH app interface. One shows a list of devices and rooms, with an option to add a new device via a "+" button. Another shows the process of selecting a device type (e.g., "RGB + White Smart Bulb") and confirmation of device addition.
